establish_stereo

Establish Stereo Display Settings

View 1 Window Settings

Below is an example of the settings typically used for View 1, and may vary depending on system and data uniqueness. These settings are to be established on the View 1 window (the stereo display monitor).

Tracking Sensitivity

Tracking sensitivity controls the movement and speed of the TopoMouse (i.e., extraction cursor.) Before proceeding, please check that the tracking sensitivity is correct for the TopoMouse (details below.)

Also, if SOCET SET crashes, the tracking sensitivity values are typically lost, and the TopoMouse behaves poorly. When this happens, you must reset the values.

1. From the SOCET SET menu bar, select Preferences > Tracking Sensitivity.

   

2. In the diagonal of the upper matrix, enter 0.1, 0.1, **-**0.1 for X, Y and Z motion, respectively, and zeros everywhere else. Then press Close. Note that the Z motion is a negative value.

   

3. Press Yes on the pop-up window to save the new values for future sessions.