Skip to content

Commit

Permalink
Add example design for Alveo U55C and Alveo U55N/Varium C1100
Browse files Browse the repository at this point in the history 
Signed-off-by: Alex Forencich <[email protected]>
  • Loading branch information
@alexforencich
alexforencich committed Nov 10, 2023
1 parent fe5f6aa commit 3535e53
Show file tree
Hide file tree
Showing 11 changed files with 1,368 additions and 0 deletions.
2 changes: 2 additions & 0 deletions example/Alveo/fpga_25g/README.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -8,6 +8,8 @@ The design by default listens to UDP port 1234 at IP address 192.168.1.128 and w

* FPGA
* AU50: xcu50-fsvh2104-2-e
* AU55C: xcu55c-fsvh2892-2L-e
* AU55N/C1100: xcu55n-fsvh2892-2L-e
* AU200: xcu200-fsgd2104-2-e
* AU250: xcu250-fsgd2104-2-e
* AU280: xcu280-fsvh2892-2L-e
Expand Down
114 changes: 114 additions & 0 deletions example/Alveo/fpga_25g/fpga_AU55C/Makefile
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,114 @@

# FPGA settings
FPGA_PART = xcu55c-fsvh2892-2L-e
FPGA_TOP = fpga
FPGA_ARCH = virtexuplus

# Files for synthesis
SYN_FILES = rtl/fpga_au55.v
SYN_FILES += rtl/fpga_core.v
SYN_FILES += rtl/eth_xcvr_phy_wrapper.v
SYN_FILES += rtl/eth_xcvr_phy_quad_wrapper.v
SYN_FILES += rtl/sync_signal.v
SYN_FILES += lib/eth/rtl/eth_mac_10g_fifo.v
SYN_FILES += lib/eth/rtl/eth_mac_10g.v
SYN_FILES += lib/eth/rtl/axis_xgmii_rx_64.v
SYN_FILES += lib/eth/rtl/axis_xgmii_tx_64.v
SYN_FILES += lib/eth/rtl/eth_phy_10g.v
SYN_FILES += lib/eth/rtl/eth_phy_10g_rx.v
SYN_FILES += lib/eth/rtl/eth_phy_10g_rx_if.v
SYN_FILES += lib/eth/rtl/eth_phy_10g_rx_frame_sync.v
SYN_FILES += lib/eth/rtl/eth_phy_10g_rx_ber_mon.v
SYN_FILES += lib/eth/rtl/eth_phy_10g_rx_watchdog.v
SYN_FILES += lib/eth/rtl/eth_phy_10g_tx.v
SYN_FILES += lib/eth/rtl/eth_phy_10g_tx_if.v
SYN_FILES += lib/eth/rtl/xgmii_baser_dec_64.v
SYN_FILES += lib/eth/rtl/xgmii_baser_enc_64.v
SYN_FILES += lib/eth/rtl/lfsr.v
SYN_FILES += lib/eth/rtl/eth_axis_rx.v
SYN_FILES += lib/eth/rtl/eth_axis_tx.v
SYN_FILES += lib/eth/rtl/udp_complete_64.v
SYN_FILES += lib/eth/rtl/udp_checksum_gen_64.v
SYN_FILES += lib/eth/rtl/udp_64.v
SYN_FILES += lib/eth/rtl/udp_ip_rx_64.v
SYN_FILES += lib/eth/rtl/udp_ip_tx_64.v
SYN_FILES += lib/eth/rtl/ip_complete_64.v
SYN_FILES += lib/eth/rtl/ip_64.v
SYN_FILES += lib/eth/rtl/ip_eth_rx_64.v
SYN_FILES += lib/eth/rtl/ip_eth_tx_64.v
SYN_FILES += lib/eth/rtl/ip_arb_mux.v
SYN_FILES += lib/eth/rtl/arp.v
SYN_FILES += lib/eth/rtl/arp_cache.v
SYN_FILES += lib/eth/rtl/arp_eth_rx.v
SYN_FILES += lib/eth/rtl/arp_eth_tx.v
SYN_FILES += lib/eth/rtl/eth_arb_mux.v
SYN_FILES += lib/eth/lib/axis/rtl/arbiter.v
SYN_FILES += lib/eth/lib/axis/rtl/priority_encoder.v
SYN_FILES += lib/eth/lib/axis/rtl/axis_fifo.v
SYN_FILES += lib/eth/lib/axis/rtl/axis_register.v
SYN_FILES += lib/eth/lib/axis/rtl/axis_async_fifo.v
SYN_FILES += lib/eth/lib/axis/rtl/axis_async_fifo_adapter.v
SYN_FILES += lib/eth/lib/axis/rtl/sync_reset.v

# XDC files
XDC_FILES = fpga_au55.xdc
XDC_FILES += lib/eth/syn/vivado/eth_mac_fifo.tcl
XDC_FILES += lib/eth/lib/axis/syn/vivado/axis_async_fifo.tcl
XDC_FILES += lib/eth/lib/axis/syn/vivado/sync_reset.tcl

# IP
IP_TCL_FILES += ip/eth_xcvr_gt.tcl

# Configuration
CONFIG_TCL_FILES = ./config.tcl

include ../common/vivado.mk

program: $(FPGA_TOP).bit
echo "open_hw" > program.tcl
echo "connect_hw_server" >> program.tcl
echo "open_hw_target" >> program.tcl
echo "current_hw_device [lindex [get_hw_devices] 0]" >> program.tcl
echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> program.tcl
echo "set_property PROGRAM.FILE {$(FPGA_TOP).bit} [current_hw_device]" >> program.tcl
echo "program_hw_devices [current_hw_device]" >> program.tcl
echo "exit" >> program.tcl
vivado -nojournal -nolog -mode batch -source program.tcl

%.mcs %.prm: %.bit
echo "write_cfgmem -force -format mcs -size 128 -interface SPIx4 -loadbit {up 0x01002000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
echo "exit" >> generate_mcs.tcl
vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
mkdir -p rev
COUNT=100; \
while [ -e rev/$*_rev$$COUNT.bit ]; \
do COUNT=$$((COUNT+1)); done; \
COUNT=$$((COUNT-1)); \
for x in .mcs .prm; \
do cp $*$$x rev/$*_rev$$COUNT$$x; \
echo "Output: rev/$*_rev$$COUNT$$x"; done;

flash: $(FPGA_TOP).mcs $(FPGA_TOP).prm
echo "open_hw" > flash.tcl
echo "connect_hw_server" >> flash.tcl
echo "open_hw_target" >> flash.tcl
echo "current_hw_device [lindex [get_hw_devices] 0]" >> flash.tcl
echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> flash.tcl
echo "create_hw_cfgmem -hw_device [current_hw_device] [lindex [get_cfgmem_parts {mt25qu01g-spi-x1_x2_x4}] 0]" >> flash.tcl
echo "current_hw_cfgmem -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM [current_hw_device]]" >> flash.tcl
echo "set_property PROGRAM.FILES [list \"$(FPGA_TOP).mcs\"] [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.PRM_FILES [list \"$(FPGA_TOP).prm\"] [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.ERASE 1 [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.CFG_PROGRAM 1 [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.VERIFY 1 [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.CHECKSUM 0 [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.ADDRESS_RANGE {use_file} [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.UNUSED_PIN_TERMINATION {pull-none} [current_hw_cfgmem]" >> flash.tcl
echo "create_hw_bitstream -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM_BITFILE [current_hw_device]]" >> flash.tcl
echo "program_hw_devices [current_hw_device]" >> flash.tcl
echo "refresh_hw_device [current_hw_device]" >> flash.tcl
echo "program_hw_cfgmem -hw_cfgmem [current_hw_cfgmem]" >> flash.tcl
echo "boot_hw_device [current_hw_device]" >> flash.tcl
echo "exit" >> flash.tcl
vivado -nojournal -nolog -mode batch -source flash.tcl

50 changes: 50 additions & 0 deletions example/Alveo/fpga_25g/fpga_AU55C/config.tcl
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,50 @@
# Copyright (c) 2023 Alex Forencich
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.

# Transceiver configuration
set eth_xcvr_freerun_freq {125}
set eth_xcvr_line_rate {25.78125}
set eth_xcvr_sec_line_rate {0}
set eth_xcvr_refclk_freq {161.1328125}
set eth_xcvr_qpll_fracn [expr {int(fmod($eth_xcvr_line_rate*1000/2 / $eth_xcvr_refclk_freq, 1)*pow(2, 24))}]
set eth_xcvr_sec_qpll_fracn [expr {int(fmod($eth_xcvr_sec_line_rate*1000/2 / $eth_xcvr_refclk_freq, 1)*pow(2, 24))}]
set eth_xcvr_rx_eq_mode {DFE}

set xcvr_config [dict create]

dict set xcvr_config CONFIG.TX_LINE_RATE $eth_xcvr_line_rate
dict set xcvr_config CONFIG.TX_QPLL_FRACN_NUMERATOR $eth_xcvr_qpll_fracn
dict set xcvr_config CONFIG.TX_REFCLK_FREQUENCY $eth_xcvr_refclk_freq
dict set xcvr_config CONFIG.RX_LINE_RATE $eth_xcvr_line_rate
dict set xcvr_config CONFIG.RX_QPLL_FRACN_NUMERATOR $eth_xcvr_qpll_fracn
dict set xcvr_config CONFIG.RX_REFCLK_FREQUENCY $eth_xcvr_refclk_freq
dict set xcvr_config CONFIG.RX_EQ_MODE $eth_xcvr_rx_eq_mode
if {$eth_xcvr_sec_line_rate != 0} {
dict set xcvr_config CONFIG.SECONDARY_QPLL_ENABLE true
dict set xcvr_config CONFIG.SECONDARY_QPLL_FRACN_NUMERATOR $eth_xcvr_sec_qpll_fracn
dict set xcvr_config CONFIG.SECONDARY_QPLL_LINE_RATE $eth_xcvr_sec_line_rate
dict set xcvr_config CONFIG.SECONDARY_QPLL_REFCLK_FREQUENCY $eth_xcvr_refclk_freq
} else {
dict set xcvr_config CONFIG.SECONDARY_QPLL_ENABLE false
}
dict set xcvr_config CONFIG.FREERUN_FREQUENCY $eth_xcvr_freerun_freq

set_property -dict $xcvr_config [get_ips eth_xcvr_gt_full]
set_property -dict $xcvr_config [get_ips eth_xcvr_gt_channel]
114 changes: 114 additions & 0 deletions example/Alveo/fpga_25g/fpga_AU55C_10g/Makefile
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,114 @@

# FPGA settings
FPGA_PART = xcu55c-fsvh2892-2L-e
FPGA_TOP = fpga
FPGA_ARCH = virtexuplus

# Files for synthesis
SYN_FILES = rtl/fpga_au55.v
SYN_FILES += rtl/fpga_core.v
SYN_FILES += rtl/eth_xcvr_phy_wrapper.v
SYN_FILES += rtl/eth_xcvr_phy_quad_wrapper.v
SYN_FILES += rtl/sync_signal.v
SYN_FILES += lib/eth/rtl/eth_mac_10g_fifo.v
SYN_FILES += lib/eth/rtl/eth_mac_10g.v
SYN_FILES += lib/eth/rtl/axis_xgmii_rx_64.v
SYN_FILES += lib/eth/rtl/axis_xgmii_tx_64.v
SYN_FILES += lib/eth/rtl/eth_phy_10g.v
SYN_FILES += lib/eth/rtl/eth_phy_10g_rx.v
SYN_FILES += lib/eth/rtl/eth_phy_10g_rx_if.v
SYN_FILES += lib/eth/rtl/eth_phy_10g_rx_frame_sync.v
SYN_FILES += lib/eth/rtl/eth_phy_10g_rx_ber_mon.v
SYN_FILES += lib/eth/rtl/eth_phy_10g_rx_watchdog.v
SYN_FILES += lib/eth/rtl/eth_phy_10g_tx.v
SYN_FILES += lib/eth/rtl/eth_phy_10g_tx_if.v
SYN_FILES += lib/eth/rtl/xgmii_baser_dec_64.v
SYN_FILES += lib/eth/rtl/xgmii_baser_enc_64.v
SYN_FILES += lib/eth/rtl/lfsr.v
SYN_FILES += lib/eth/rtl/eth_axis_rx.v
SYN_FILES += lib/eth/rtl/eth_axis_tx.v
SYN_FILES += lib/eth/rtl/udp_complete_64.v
SYN_FILES += lib/eth/rtl/udp_checksum_gen_64.v
SYN_FILES += lib/eth/rtl/udp_64.v
SYN_FILES += lib/eth/rtl/udp_ip_rx_64.v
SYN_FILES += lib/eth/rtl/udp_ip_tx_64.v
SYN_FILES += lib/eth/rtl/ip_complete_64.v
SYN_FILES += lib/eth/rtl/ip_64.v
SYN_FILES += lib/eth/rtl/ip_eth_rx_64.v
SYN_FILES += lib/eth/rtl/ip_eth_tx_64.v
SYN_FILES += lib/eth/rtl/ip_arb_mux.v
SYN_FILES += lib/eth/rtl/arp.v
SYN_FILES += lib/eth/rtl/arp_cache.v
SYN_FILES += lib/eth/rtl/arp_eth_rx.v
SYN_FILES += lib/eth/rtl/arp_eth_tx.v
SYN_FILES += lib/eth/rtl/eth_arb_mux.v
SYN_FILES += lib/eth/lib/axis/rtl/arbiter.v
SYN_FILES += lib/eth/lib/axis/rtl/priority_encoder.v
SYN_FILES += lib/eth/lib/axis/rtl/axis_fifo.v
SYN_FILES += lib/eth/lib/axis/rtl/axis_register.v
SYN_FILES += lib/eth/lib/axis/rtl/axis_async_fifo.v
SYN_FILES += lib/eth/lib/axis/rtl/axis_async_fifo_adapter.v
SYN_FILES += lib/eth/lib/axis/rtl/sync_reset.v

# XDC files
XDC_FILES = fpga_au55.xdc
XDC_FILES += lib/eth/syn/vivado/eth_mac_fifo.tcl
XDC_FILES += lib/eth/lib/axis/syn/vivado/axis_async_fifo.tcl
XDC_FILES += lib/eth/lib/axis/syn/vivado/sync_reset.tcl

# IP
IP_TCL_FILES += ip/eth_xcvr_gt.tcl

# Configuration
CONFIG_TCL_FILES = ./config.tcl

include ../common/vivado.mk

program: $(FPGA_TOP).bit
echo "open_hw" > program.tcl
echo "connect_hw_server" >> program.tcl
echo "open_hw_target" >> program.tcl
echo "current_hw_device [lindex [get_hw_devices] 0]" >> program.tcl
echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> program.tcl
echo "set_property PROGRAM.FILE {$(FPGA_TOP).bit} [current_hw_device]" >> program.tcl
echo "program_hw_devices [current_hw_device]" >> program.tcl
echo "exit" >> program.tcl
vivado -nojournal -nolog -mode batch -source program.tcl

%.mcs %.prm: %.bit
echo "write_cfgmem -force -format mcs -size 128 -interface SPIx4 -loadbit {up 0x01002000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
echo "exit" >> generate_mcs.tcl
vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
mkdir -p rev
COUNT=100; \
while [ -e rev/$*_rev$$COUNT.bit ]; \
do COUNT=$$((COUNT+1)); done; \
COUNT=$$((COUNT-1)); \
for x in .mcs .prm; \
do cp $*$$x rev/$*_rev$$COUNT$$x; \
echo "Output: rev/$*_rev$$COUNT$$x"; done;

flash: $(FPGA_TOP).mcs $(FPGA_TOP).prm
echo "open_hw" > flash.tcl
echo "connect_hw_server" >> flash.tcl
echo "open_hw_target" >> flash.tcl
echo "current_hw_device [lindex [get_hw_devices] 0]" >> flash.tcl
echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> flash.tcl
echo "create_hw_cfgmem -hw_device [current_hw_device] [lindex [get_cfgmem_parts {mt25qu01g-spi-x1_x2_x4}] 0]" >> flash.tcl
echo "current_hw_cfgmem -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM [current_hw_device]]" >> flash.tcl
echo "set_property PROGRAM.FILES [list \"$(FPGA_TOP).mcs\"] [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.PRM_FILES [list \"$(FPGA_TOP).prm\"] [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.ERASE 1 [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.CFG_PROGRAM 1 [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.VERIFY 1 [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.CHECKSUM 0 [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.ADDRESS_RANGE {use_file} [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.UNUSED_PIN_TERMINATION {pull-none} [current_hw_cfgmem]" >> flash.tcl
echo "create_hw_bitstream -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM_BITFILE [current_hw_device]]" >> flash.tcl
echo "program_hw_devices [current_hw_device]" >> flash.tcl
echo "refresh_hw_device [current_hw_device]" >> flash.tcl
echo "program_hw_cfgmem -hw_cfgmem [current_hw_cfgmem]" >> flash.tcl
echo "boot_hw_device [current_hw_device]" >> flash.tcl
echo "exit" >> flash.tcl
vivado -nojournal -nolog -mode batch -source flash.tcl

50 changes: 50 additions & 0 deletions example/Alveo/fpga_25g/fpga_AU55C_10g/config.tcl
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,50 @@
# Copyright (c) 2023 Alex Forencich
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.

# Transceiver configuration
set eth_xcvr_freerun_freq {125}
set eth_xcvr_line_rate {10.3125}
set eth_xcvr_sec_line_rate {0}
set eth_xcvr_refclk_freq {161.1328125}
set eth_xcvr_qpll_fracn [expr {int(fmod($eth_xcvr_line_rate*1000/2 / $eth_xcvr_refclk_freq, 1)*pow(2, 24))}]
set eth_xcvr_sec_qpll_fracn [expr {int(fmod($eth_xcvr_sec_line_rate*1000/2 / $eth_xcvr_refclk_freq, 1)*pow(2, 24))}]
set eth_xcvr_rx_eq_mode {DFE}

set xcvr_config [dict create]

dict set xcvr_config CONFIG.TX_LINE_RATE $eth_xcvr_line_rate
dict set xcvr_config CONFIG.TX_QPLL_FRACN_NUMERATOR $eth_xcvr_qpll_fracn
dict set xcvr_config CONFIG.TX_REFCLK_FREQUENCY $eth_xcvr_refclk_freq
dict set xcvr_config CONFIG.RX_LINE_RATE $eth_xcvr_line_rate
dict set xcvr_config CONFIG.RX_QPLL_FRACN_NUMERATOR $eth_xcvr_qpll_fracn
dict set xcvr_config CONFIG.RX_REFCLK_FREQUENCY $eth_xcvr_refclk_freq
dict set xcvr_config CONFIG.RX_EQ_MODE $eth_xcvr_rx_eq_mode
if {$eth_xcvr_sec_line_rate != 0} {
dict set xcvr_config CONFIG.SECONDARY_QPLL_ENABLE true
dict set xcvr_config CONFIG.SECONDARY_QPLL_FRACN_NUMERATOR $eth_xcvr_sec_qpll_fracn
dict set xcvr_config CONFIG.SECONDARY_QPLL_LINE_RATE $eth_xcvr_sec_line_rate
dict set xcvr_config CONFIG.SECONDARY_QPLL_REFCLK_FREQUENCY $eth_xcvr_refclk_freq
} else {
dict set xcvr_config CONFIG.SECONDARY_QPLL_ENABLE false
}
dict set xcvr_config CONFIG.FREERUN_FREQUENCY $eth_xcvr_freerun_freq

set_property -dict $xcvr_config [get_ips eth_xcvr_gt_full]
set_property -dict $xcvr_config [get_ips eth_xcvr_gt_channel]
Loading

0 comments on commit 3535e53

Please sign in to comment.