Extended Kalman Filter Project Starter Code

Self-Driving Car Engineer Nanodegree Program

In this project I utilized a kalman filter to estimate the state of a moving object of interest with noisy lidar and radar measurements and track it. Passing the project requires obtaining RMSE values that are lower than the tolerance outlined in the project rubric.

This project involves the Term 2 Simulator which can be downloaded here

This repository includes two files that can be used to set up and install uWebSocketIO for either Linux or Mac systems. For windows you can use either Docker, VMware, or even Windows 10 Bash on Ubuntu to install uWebSocketIO. Please see the uWebSocketIO Starter Guide page in the classroom within the EKF Project lesson for the required version and installation scripts.

Once the install for uWebSocketIO is complete, the main program can be built and run by doing the following from the project top directory.

1. mkdir build
2. cd build
3. cmake ..
4. make
5. ./ExtendedKF

Tips for setting up your environment can be found in the classroom lesson for this project.

Here is the main protocol that main.cpp uses for uWebSocketIO in communicating with the simulator.

INPUT: values provided by the simulator to the c++ program

["sensor_measurement"] => the measurement that the simulator observed (either lidar or radar)

OUTPUT: values provided by the c++ program to the simulator

["estimate_x"] <= kalman filter estimated position x ["estimate_y"] <= kalman filter estimated position y ["rmse_x"] ["rmse_y"] ["rmse_vx"] ["rmse_vy"]

---

Other Important Dependencies

• cmake >= 3.5
  • All OSes: click here for installation instructions
• make >= 4.1 (Linux, Mac), 3.81 (Windows)
  • Linux: make is installed by default on most Linux distros
  • Mac: install Xcode command line tools to get make
  • Windows: Click here for installation instructions
• gcc/g++ >= 5.4
  • Linux: gcc / g++ is installed by default on most Linux distros
  • Mac: same deal as make - install Xcode command line tools
  • Windows: recommend using MinGW

Basic Build Instructions

1. Clone this repo.
2. Make a build directory: mkdir build && cd build
3. Compile: cmake .. && make
   • On windows, you may need to run: cmake .. -G "Unix Makefiles" && make
4. Run it: ./ExtendedKF

Generating Additional Data

If you'd like to generate your own radar and lidar data, see the utilities repo for Matlab scripts that can generate additional data.

Project Instructions and Rubric

More information is only accessible by people who are already enrolled in Term 2 of CarND. If you are enrolled, see the project resources page for instructions and the project rubric.