Description
Is your feature request related to a problem? Please describe.
In ROS1, when my team needed to use a noisy sensor like the default UR e-series FT sensor, we'd filter the sensor data through a simple node that published to some topic '/filtered_wrench' which we could use for our force-based-controller inputs.
Force-based controllers were initialized with some '/force_sensor_wrench' topic to then listen to, which we could remap to our '/filtered_wrench'.
This topic-based approach also enabled us to impose offsets on sensor data. We are looking to impose an offset on FT sensor data used for admittance control in ROS2, in the new native ROS2 control structure.
Describe the solution you'd like
We believe this should be possible currently through the capability to expose and share hardware and state interfaces between broadcasters and controllers inheriting from the chained controllers class. If a simpler solution is available, all the better.
Describe alternatives you've considered
We've tried utilizing the exponential filter present in the ros2_controllers admittance controller to process the FT noise but this does not meet our need to be able to impose an offset on the force torque data.
Additional context
This request is based in work on the following platforms and software versions:
ROS2 | Humble | Ubuntu 22.04 | UR10e | Polyscope 5.11