chore: update Q3D busbar example with Matrix Reduction Operation

examples/high_frequency/emc/busbar.py

@@ -117,18 +117,56 @@
 print(q3d.net_sources("Bar2"))
 print(q3d.net_sources("Bar3"))
 
+# Create Matrix Reduction Operations
+
+# Series of Bar1 and Bar2
+
+mr_series = q3d.insert_reduced_matrix(
+    operation_name="JoinSeries",
+    assignment=["Sink1", "Source2"],
+    reduced_matrix="MR_1_Series",
+    new_net_name="Series1",
+)
+
+# Add Parallel with Bar3
+
+# mr_series = [b for b in q3d.matrices if b.name == 'MR_1_Series'] [0]
+mr_series.add_operation(
+    operation_type="JoinParallel",
+    source_names=["Source1", "Source3"],
+    new_net_name="SeriesPar",
+    new_source_name="src_par",
+    new_sink_name="snk_par",
+)
+
+# Series of Bar1 and Bar2
+
+mr_series2 = q3d.insert_reduced_matrix(
+    operation_name="JoinSeries",
+    assignment=["Sink1", "Source2"],
+    reduced_matrix="MR_2_series",
+    new_net_name="Series2",
+)
+
+# Add Series with Bar3
+mr_series2.add_operation(
+    operation_type="JoinSeries",
+    source_names=["Sink3", "Source1"],
+    new_net_name="MR_2_Series1",
+)
+
 # Create the solution setup and define the frequency range for the solution.
 
 setup1 = q3d.create_setup(props={"AdaptiveFreq": "100MHz"})
 sweep = setup1.add_sweep()
-sweep.props["RangeStart"] = "1MHz"
-sweep.props["RangeEnd"] = "100MHz"
+sweep.props["RangeStart"] = "0MHz"
+sweep.props["RangeEnd"] = "1000MHz"
 sweep.props["RangeStep"] = "5MHz"
 sweep.update()
 
 # ### Set up for postprocessing
 #
-# Specify the traces to display after solving the model.
+# Specify the traces to display after solving the model.Capacitances - Original Matrix
 
 data_plot_self = q3d.matrices[0].get_sources_for_plot(
     get_self_terms=True, get_mutual_terms=False
@@ -137,9 +175,23 @@
     get_self_terms=False, get_mutual_terms=True, category="C"
 )
 
+# Specify the traces to display after solving the model.ACL - Reduced Matrix MR_1_Series
+
+data_reducedm1_plot_self = q3d.matrices[1].get_sources_for_plot(
+    get_self_terms=True, get_mutual_terms=False, category="ACL"
+)
+
+# Specify the traces to display after solving the model.ACL - Reduced Matrix MR_2_Series
+
+data_reducedm2_plot_self = q3d.matrices[2].get_sources_for_plot(
+    get_self_terms=True, get_mutual_terms=False, category="ACL"
+)
+
 # Define a plot and a data table in AEDT for visualizing results.
 
 q3d.post.create_report(expressions=data_plot_self)
+q3d.post.create_report(expressions=data_reducedm1_plot_self)
+q3d.post.create_report(expressions=data_reducedm2_plot_self)
 q3d.post.create_report(
     expressions=data_plot_mutual, context="Original", plot_type="Data Table"
 )