ASMUC driver help

connector/doc/AIRSYS_UNICOOL_ASMUC.md

@@ -0,0 +1,61 @@
+---
+uid: Connector_help_AIRSYS_UNICOOL_ASMUC
+---
+
+# AIRSYS UNICOOL ASMUC
+
+Driver contains general overview parameters about the HVAC controller and it's cooling units. 
+
+## About
+
+### Version Info
+|Range                  |Features              |Based on  |System Impact  |
+|-----------------------|----------------------|----------|---------------|
+|1.0.0.x [SLC Main]     |Initial version       |-         |-              |
+
+### Product Info
+
+|Range  |Supported Firmware |
+|------------|--------------|
+|1.0.0.x     |2.1.049       |
+
+### System Info
+
+In this subsection, insert a table with five columns. Indicate whether the range features **DCF integration** and whether it is **Cassandra compliant**.
+
+In the "Linked Components"; column, list all DataMiner components that have a link, in any way, with this connector range, e.g. mediation connectors, Automation scripts, custom report, etc.
+
+In the "Exported Components" column, list all the connectors that are exported by the parent connector in question.
+**This can only be omitted for an exported connector or for a connector that cannot have exported connectors.**
+
+|Range      |DCF Integration  |Cassandra Compliant  |Linked Components  |Exported Components |
+|-----------|-----------------|---------------------|-------------------|--------------------|
+|1.0.0.x    |No               |Yes                  |-                  |                    |
+
+## Configuration
+
+### Connections
+
+#### SNMP Connection
+
+This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
+
+SNMP CONNECTION:
+
+- **IP address/host**
+
+SNMP port is set by default to 161.
+
+### Web Interface
+
+The web interface is only accessible when the client machine has network access to the product.
+
+## How to use
+
+This connector has no capability to do sets on the device and is for display purposes only. Connector will frequently poll the device through its SNMP interface to retrieve real-time parameters such as power consumption, fan speeds and many alarm states.
+
+The controller can monitor up to 16 HVAC units. Instantaneous and average power consumptions can be seen for each component on the **Power** page.
+
+**Component Run-Time** page has run and start times for the HVAC components. Most critical alarms can be seen on the **DI-Inputs** page (when one of the fans gets clogged with dust, supply fan overload, etc.).
+
+Sensor readings, such as humidity, temperatures or fan speeds, can be found on the **Sensors** and **Driver Outputs** pages.

connector/toc.yml

@@ -244,6 +244,10 @@
   items:
   - name: Agilis AUC28
     topicUid: Connector_help_Agilis_AUC28
+- name: AIRSYS
+  items:
+  - name: AIRSYS UNICOOL ASMUC
+    topicUid: Connector_help_AIRSYS_UNICOOL_ASMUC
 - name: AJA
   items:
   - name: AJA IPR-10G2-HDMI