Merge pull request #357 from SlcRobinME/main

Added Raritan Xerus Platform connector help

connector/doc/Raritan_Dominion_PXG2.md

@@ -6,6 +6,9 @@ uid: Connector_help_Raritan_Dominion_PXG2
 
 The Raritan Dominion PXG2 connector facilitates the monitoring of this line of Power Distribution Units (PDU).
 
+> [!NOTE]
+> This connector is based on the Xerus Platform MIB. Its implementation has been moved to the [Raritan Xerus Platform connector](xref:Connector_help_Raritan_Xerus_Platform). Please migrate to that connector instead.
+
 ## About
 
 This connector uses **SNMP** to extract all relevant information concerning the configuration and operating configuration of Raritan's PDU.

connector/doc/Raritan_Xerus_Platform.md

@@ -0,0 +1,113 @@
+---
+uid: Connector_help_Raritan_Xerus_Platform
+---
+
+# Raritan Xerus Platform
+
+The Raritan Xerus Platform connector facilitates the monitoring and control of the following Raritan device types:
+
+- SRC
+- PX3
+- PX2
+- PXC
+- PX0
+- BCM2
+- PX3TS
+- SmartLock
+- DX2 SmartSensors
+- AMS2
+
+> [!NOTE]
+> The Xerus MIB implements all Raritan product types. This connector is therefore a generic connector that supports all these devices. Depending on the type of device you connect to, some tables may be empty.
+
+## About
+
+This connector uses **SNMP** to extract all relevant information concerning the configuration and operating configuration of Raritan's PDU.
+
+### Version Info
+
+| Range                | Key Features     | Based on     | System Impact     |
+|----------------------|------------------|--------------|-------------------|
+| 1.0.0.x [SLC Main]   | Initial version  | -            | -                 |
+
+### Product Info
+
+| Range     | Supported Firmware     |
+|-----------|------------------------|
+| 1.0.0.x   | 4.1.1.5-49961          |
+
+### System Info
+
+| Range     | DCF Integration     | Cassandra Compliant     | Linked Components     | Exported Components     |
+|-----------|---------------------|-------------------------|-----------------------|-------------------------|
+| 1.0.0.x   | No                  | Yes                     | -                     | -                       |
+
+## Installation and configuration
+
+### Creation
+
+#### SNMP Main Connection
+
+This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
+
+SNMP CONNECTION:
+
+- **IP address/host**: The polling IP or URL of the destination.
+- **IP port**: The IP port of the destination.
+
+SNMP Settings:
+
+- **Get community string**: The community string used when reading values from the device (default: *public*).
+- **Set community string**: The community string used when setting values on the device (default: *private*).
+
+## Usage
+
+### Unit
+
+This page displays information regarding the hardware configuration and the operating state of the sensors of the connected PDU units.
+
+### Inlets
+
+This page displays the specifications of each inlet. It also shows the current operating configuration, and it allows you to change the configuration of each inlet sensor.
+
+### Over Current Protector
+
+This page displays the specifications of each overcurrent protector. It also shows the current operating configuration, and it allows you to change the configuration of each sensor.
+
+### Outlets
+
+This page displays the specifications of all the outlets of the device. It also shows the current operating configuration, and it allows you to change the configuration.
+
+### External Sensors
+
+This page displays the specifications of the external sensors. It also shows the current operating configuration, and it allows you to change the configuration of each sensor.
+
+### Server Reachability
+
+This page lists the servers connected to the device, their respective IPs, and whether or not they can be reached.
+
+### Transfer Switch
+
+This page displays the transfers switches of the device. It also shows the current operating configuration, and it allows you to change the configuration.
+
+### Control
+
+On this page, you can control the operation of the connected elements of this device.
+
+### Measurements Unit/Inlet/Over Current Protector/Outlet/External Sensor/Transfer Switch
+
+These pages show the availability and values for each unit sensor, inlet, overcurrent protector, etc.
+
+### Log Unit/Inlet/Over Current Protector/Outlet/External Sensor/Transfer Switch
+
+These pages log the information for the relevant sensor in a span of two hours. One entity is added to the table corresponding to each minute, so there will be 120 entries per sensor.
+
+For each sensor, the state, maximum, minimum and average value are logged. There is also an indication of whether the logged information is available.
+
+### Reliability Data
+
+This page contains a list of PDU reliability data entries.
+
+### Reliability Error Log
+
+This page contains a list of PDU reliability error log entries.

connector/toc.yml

@@ -6886,6 +6886,8 @@
     topicUid: Connector_help_Raritan_Dominion_KX
   - name: Raritan Dominion PXG2
     topicUid: Connector_help_Raritan_Dominion_PXG2
+  - name: Raritan Xerus Platform
+    topicUid: Connector_help_Raritan_Xerus_Platform
 - name: RCI
   items:
   - name: RCI RC2000