rename Aircraft.Wing.MOUNTING_TYPE to Aircraft.Wing.MOUNT_LOCATION

aviary/mission/gasp_based/ode/params.py

@@ -123,7 +123,7 @@ def promote_params(sys, trajs=None, phases=None):
     Aircraft.Wing.SWEEP: dict(units="deg", val=25),
     Aircraft.HorizontalTail.SWEEP: dict(units="deg", val=25),
     Aircraft.HorizontalTail.MOMENT_RATIO: dict(units="unitless", val=0.2307),
-    Aircraft.Wing.MOUNTING_TYPE: dict(units="unitless", val=0),
+    Aircraft.Wing.MOUNT_LOCATION: dict(units="unitless", val=0),
     Aircraft.Design.STATIC_MARGIN: dict(units="unitless", val=0.03),
     Aircraft.Design.CG_DELTA: dict(units="unitless", val=0.25),
     Aircraft.Fuselage.FORM_FACTOR: dict(units="unitless", val=1.25),

aviary/models/large_single_aisle_1/large_single_aisle_1_GwGm.csv

@@ -126,7 +126,7 @@ aircraft:wing:max_slat_deflection_landing,10,deg
 aircraft:wing:max_slat_deflection_takeoff,10,deg
 aircraft:wing:max_thickness_location,0.4,unitless
 aircraft:wing:min_pressure_location,0.3,unitless
-aircraft:wing:mounting_type,0,unitless
+aircraft:wing:mount_location,0,unitless
 aircraft:wing:num_flap_segments,2,unitless
 aircraft:wing:optimum_flap_deflection,55,deg
 aircraft:wing:optimum_slat_deflection,20,deg

aviary/models/large_turboprop_freighter/large_turboprop_freighter.csv

@@ -160,7 +160,7 @@ aircraft:wing:max_slat_deflection_landing, 0, deg
 aircraft:wing:max_slat_deflection_takeoff, 0, deg
 aircraft:wing:max_thickness_location, 0.35, unitless
 aircraft:wing:min_pressure_location, 0.3, unitless
-aircraft:wing:mounting_type, 1, unitless
+aircraft:wing:mount_location, 1, unitless
 aircraft:wing:num_flap_segments, 2, unitless
 aircraft:wing:optimum_flap_deflection, 55, deg
 aircraft:wing:optimum_slat_deflection, 45, deg

aviary/models/small_single_aisle/small_single_aisle_GwGm.csv

@@ -125,7 +125,7 @@ aircraft:wing:max_slat_deflection_landing,10,deg
 aircraft:wing:max_slat_deflection_takeoff,10,deg
 aircraft:wing:max_thickness_location,0.35,unitless
 aircraft:wing:min_pressure_location,0.3,unitless
-aircraft:wing:mounting_type,0,unitless
+aircraft:wing:mount_location,0,unitless
 aircraft:wing:num_flap_segments,2,unitless
 aircraft:wing:optimum_flap_deflection,20,deg
 aircraft:wing:optimum_slat_deflection,20,deg

aviary/models/test_aircraft/aircraft_for_bench_FwGm.csv

@@ -126,7 +126,7 @@ aircraft:wing:max_slat_deflection_landing,10,deg
 aircraft:wing:max_slat_deflection_takeoff,10,deg
 aircraft:wing:max_thickness_location,0.4,unitless
 aircraft:wing:min_pressure_location,0.3,unitless
-aircraft:wing:mounting_type,0,unitless
+aircraft:wing:mount_location,0,unitless
 aircraft:wing:num_flap_segments,2,unitless
 aircraft:wing:optimum_flap_deflection,55,deg
 aircraft:wing:optimum_slat_deflection,20,deg

aviary/models/test_aircraft/aircraft_for_bench_GwFm.csv

@@ -236,7 +236,7 @@ aircraft:wing:max_camber_at_70_semispan,0.0,unitless
 aircraft:wing:max_thickness_location,0.4,unitless
 aircraft:wing:min_pressure_location,0.3,unitless
 aircraft:wing:misc_mass_scaler,1.0,unitless
-aircraft:wing:mounting_type,0,unitless
+aircraft:wing:mount_location,0,unitless
 aircraft:wing:num_integration_stations,50,unitless
 aircraft:wing:shear_control_mass_scaler,1.0,unitless
 aircraft:wing:span_efficiency_reduction,False,unitless

aviary/models/test_aircraft/aircraft_for_bench_GwGm.csv

@@ -125,7 +125,7 @@ aircraft:wing:max_slat_deflection_landing,10,deg
 aircraft:wing:max_slat_deflection_takeoff,10,deg
 aircraft:wing:max_thickness_location,0.4,unitless
 aircraft:wing:min_pressure_location,0.3,unitless
-aircraft:wing:mounting_type,0,unitless
+aircraft:wing:mount_location,0,unitless
 aircraft:wing:num_flap_segments,2,unitless
 aircraft:wing:optimum_flap_deflection,55,deg
 aircraft:wing:optimum_slat_deflection,20,deg

aviary/models/test_aircraft/aircraft_for_bench_GwGm_lbm_s.csv

@@ -126,7 +126,7 @@ aircraft:wing:max_slat_deflection_landing,10,deg
 aircraft:wing:max_slat_deflection_takeoff,10,deg
 aircraft:wing:max_thickness_location,0.4,unitless
 aircraft:wing:min_pressure_location,0.3,unitless
-aircraft:wing:mounting_type,0,unitless
+aircraft:wing:mount_location,0,unitless
 aircraft:wing:num_flap_segments,2,unitless
 aircraft:wing:optimum_flap_deflection,55,deg
 aircraft:wing:optimum_slat_deflection,20,deg

aviary/models/test_aircraft/converter_configuration_test_data_GwGm.csv

@@ -124,7 +124,7 @@ aircraft:wing:max_slat_deflection_landing,10,deg
 aircraft:wing:max_slat_deflection_takeoff,10,deg
 aircraft:wing:max_thickness_location,0.35,unitless
 aircraft:wing:min_pressure_location,0.3,unitless
-aircraft:wing:mounting_type,1,unitless
+aircraft:wing:mount_location,1,unitless
 aircraft:wing:num_flap_segments,2,unitless
 aircraft:wing:optimum_flap_deflection,55,deg
 aircraft:wing:optimum_slat_deflection,20,deg

aviary/subsystems/aerodynamics/aerodynamics_builder.py

@@ -602,7 +602,7 @@ def report(self, prob, reports_folder, **kwargs):
     Aircraft.Wing.FUSELAGE_INTERFERENCE_FACTOR,
     Aircraft.Wing.MAX_THICKNESS_LOCATION,
     Aircraft.Wing.MIN_PRESSURE_LOCATION,
-    Aircraft.Wing.MOUNTING_TYPE,
+    Aircraft.Wing.MOUNT_LOCATION,
     Aircraft.Wing.SPAN,
     Aircraft.Wing.SWEEP,
     Aircraft.Wing.TAPER_RATIO,

aviary/subsystems/aerodynamics/gasp_based/gaspaero.py

@@ -165,7 +165,7 @@ def setup(self):
 
         add_aviary_input(self, Aircraft.Wing.THICKNESS_TO_CHORD_ROOT, val=0.15)
 
-        add_aviary_input(self, Aircraft.Wing.MOUNTING_TYPE, val=0.0)
+        add_aviary_input(self, Aircraft.Wing.MOUNT_LOCATION, val=0.0)
 
         add_aviary_input(self, Aircraft.HorizontalTail.VERTICAL_TAIL_FRACTION, val=0.0)
 
@@ -202,7 +202,7 @@ def setup_partials(self):
                 Aircraft.HorizontalTail.VERTICAL_TAIL_FRACTION,
                 Aircraft.VerticalTail.SPAN,
                 Aircraft.Fuselage.AVG_DIAMETER,
-                Aircraft.Wing.MOUNTING_TYPE,
+                Aircraft.Wing.MOUNT_LOCATION,
                 Aircraft.Wing.THICKNESS_TO_CHORD_ROOT,
                 Aircraft.Wing.AREA,
                 Aircraft.Wing.SPAN,

aviary/subsystems/aerodynamics/gasp_based/interference.py

@@ -51,7 +51,7 @@ class CommonVariables(om.ExplicitComponent):
 
     def setup(self):
         self.add_input('CROOT')
-        add_aviary_input(self, Aircraft.Wing.MOUNTING_TYPE)
+        add_aviary_input(self, Aircraft.Wing.MOUNT_LOCATION)
         add_aviary_input(self, Aircraft.Wing.THICKNESS_TO_CHORD_ROOT)
         add_aviary_input(self, Aircraft.Fuselage.AVG_DIAMETER)
 
@@ -65,7 +65,7 @@ def compute(self, inputs, outputs):
         outputs['wtofd'] = TCR*CROOT/SWF  # wing_thickness_over_fuselage_diameter
 
     def setup_partials(self):
-        self.declare_partials('ZW_RF', [Aircraft.Wing.MOUNTING_TYPE], val=2)
+        self.declare_partials('ZW_RF', [Aircraft.Wing.MOUNT_LOCATION], val=2)
         self.declare_partials(
             'wtofd', [
                 Aircraft.Wing.THICKNESS_TO_CHORD_ROOT,

aviary/subsystems/aerodynamics/gasp_based/test/test_gaspaero.py

@@ -172,7 +172,7 @@ def _init_geom(prob):
     prob.set_val(Aircraft.Wing.AVERAGE_CHORD, setup_data["cbarw"])
     prob.set_val(Aircraft.Wing.TAPER_RATIO, setup_data["slm"])
     prob.set_val(Aircraft.Wing.THICKNESS_TO_CHORD_ROOT, setup_data["tcr"])
-    prob.set_val(Aircraft.Wing.MOUNTING_TYPE, setup_data["hwing"])
+    prob.set_val(Aircraft.Wing.MOUNT_LOCATION, setup_data["hwing"])
     prob.set_val(Aircraft.HorizontalTail.VERTICAL_TAIL_FRACTION, setup_data["sah"])
     prob.set_val(Aircraft.HorizontalTail.SPAN, setup_data["bht"])
     prob.set_val(Aircraft.VerticalTail.SPAN, setup_data["bvt"])

aviary/subsystems/aerodynamics/gasp_based/test/test_interference.py

@@ -36,7 +36,7 @@ def test_common_vars(self):
         prob.setup(force_alloc_complex=True)
 
         prob.set_val('CROOT', 12)
-        prob.set_val(Aircraft.Wing.MOUNTING_TYPE, .1)
+        prob.set_val(Aircraft.Wing.MOUNT_LOCATION, .1)
         prob.set_val(Aircraft.Wing.THICKNESS_TO_CHORD_ROOT, .12)
         prob.set_val(Aircraft.Fuselage.AVG_DIAMETER, 10)
 
@@ -121,7 +121,7 @@ def test_complete_group(self):
         prob.set_val(Aircraft.Wing.AREA, 1400)
         prob.set_val(Aircraft.Wing.SPAN, 118)
         prob.set_val(Aircraft.Wing.TAPER_RATIO, .9)
-        prob.set_val(Aircraft.Wing.MOUNTING_TYPE, .1)
+        prob.set_val(Aircraft.Wing.MOUNT_LOCATION, .1)
         prob.set_val(Aircraft.Wing.THICKNESS_TO_CHORD_ROOT, .12)
         prob.set_val(Aircraft.Wing.THICKNESS_TO_CHORD_TIP, .1)
         prob.set_val(Aircraft.Fuselage.AVG_DIAMETER, 12)

aviary/subsystems/mass/gasp_based/fixed.py

@@ -2270,7 +2270,7 @@ def initialize(self):
     def setup(self):
         num_engine_type = len(self.options[Aircraft.Engine.NUM_ENGINES])
 
-        add_aviary_input(self, Aircraft.Wing.MOUNTING_TYPE, val=0)
+        add_aviary_input(self, Aircraft.Wing.MOUNT_LOCATION, val=0)
         add_aviary_input(self, Aircraft.LandingGear.MASS_COEFFICIENT, val=0.04)
         add_aviary_input(self, Mission.Design.GROSS_MASS, val=152000)
         add_aviary_input(self, Aircraft.LandingGear.MAIN_GEAR_MASS_COEFFICIENT, val=0.85)
@@ -2291,7 +2291,7 @@ def setup(self):
         self.declare_partials(Aircraft.LandingGear.MAIN_GEAR_MASS, "*")
 
     def compute(self, inputs, outputs):
-        wing_loc = inputs[Aircraft.Wing.MOUNTING_TYPE]
+        wing_loc = inputs[Aircraft.Wing.MOUNT_LOCATION]
         c_gear_mass = inputs[Aircraft.LandingGear.MASS_COEFFICIENT]
         gross_wt_initial = inputs[Mission.Design.GROSS_MASS] * GRAV_ENGLISH_LBM
         c_main_gear = inputs[Aircraft.LandingGear.MAIN_GEAR_MASS_COEFFICIENT]
@@ -2331,7 +2331,7 @@ def compute_partials(self, inputs, J):
         c_gear_mass = inputs[Aircraft.LandingGear.MASS_COEFFICIENT]
         gross_wt_initial = inputs[Mission.Design.GROSS_MASS] * GRAV_ENGLISH_LBM
         c_main_gear = inputs[Aircraft.LandingGear.MAIN_GEAR_MASS_COEFFICIENT]
-        wing_loc = inputs[Aircraft.Wing.MOUNTING_TYPE]
+        wing_loc = inputs[Aircraft.Wing.MOUNT_LOCATION]
         clearance_ratio = inputs[Aircraft.Nacelle.CLEARANCE_RATIO]
         nacelle_diam = inputs[Aircraft.Nacelle.AVG_DIAMETER]
 

aviary/subsystems/mass/gasp_based/test/test_fixed.py

@@ -888,7 +888,7 @@ def setUp(self):
             Aircraft.Nacelle.AVG_DIAMETER, val=7.35, units="ft"
         )  # bug fixed value and original value
         self.prob.model.set_input_defaults(
-            Aircraft.Wing.MOUNTING_TYPE, val=0, units="unitless")
+            Aircraft.Wing.MOUNT_LOCATION, val=0, units="unitless")
 
         self.prob.setup(check=False, force_alloc_complex=True)
 
@@ -927,7 +927,7 @@ def setUp(self):
             Aircraft.LandingGear.MAIN_GEAR_MASS_COEFFICIENT, val=0.85, units="unitless"
         )  # bug fixed value and original value
         self.prob.model.set_input_defaults(
-            Aircraft.Wing.MOUNTING_TYPE, val=0.1, units="unitless")
+            Aircraft.Wing.MOUNT_LOCATION, val=0.1, units="unitless")
 
         setup_model_options(self.prob, options)
 
@@ -1261,7 +1261,7 @@ def setUp(self):
             Aircraft.Wing.SPAN, val=117.8, units="ft"
         )  # original GASP value
         self.prob.model.set_input_defaults(
-            Aircraft.Wing.MOUNTING_TYPE, val=.1, units="unitless")
+            Aircraft.Wing.MOUNT_LOCATION, val=.1, units="unitless")
         self.prob.model.set_input_defaults(
             Mission.Design.GROSS_MASS, val=175400, units="lbm"
         )  # bug fixed value and original value
@@ -1600,7 +1600,7 @@ def test_case1(self):
             Aircraft.Engine.HAS_PROPELLERS: ([False], 'unitless'),
             Aircraft.Wing.FLAP_TYPE: ('plain', 'unitless'),
             Aircraft.Wing.SWEEP: (30.0, 'deg'),
-            Aircraft.Wing.MOUNTING_TYPE: (0, 'unitless'),
+            Aircraft.Wing.MOUNT_LOCATION: (0, 'unitless'),
             Aircraft.Wing.TAPER_RATIO: (0.25, 'unitless'),
             Aircraft.Wing.ASPECT_RATIO: (11.0, 'unitless'),
             Aircraft.Wing.SPAN: (100.0, 'ft'),

aviary/subsystems/mass/gasp_based/test/test_mass_summation.py

@@ -2601,7 +2601,7 @@ def setUp(self):
         )
         self.prob.model.set_input_defaults(Aircraft.Wing.SWEEP, val=22.47, units="deg")
         self.prob.model.set_input_defaults(
-            Aircraft.Wing.MOUNTING_TYPE, val=.1, units="unitless")
+            Aircraft.Wing.MOUNT_LOCATION, val=.1, units="unitless")
         self.prob.model.set_input_defaults(
             Aircraft.Wing.ASPECT_RATIO, val=19.565, units="unitless"
         )
@@ -2995,7 +2995,7 @@ def setUp(self):
         )
         self.prob.model.set_input_defaults(Aircraft.Wing.SWEEP, val=22.47, units="deg")
         self.prob.model.set_input_defaults(
-            Aircraft.Wing.MOUNTING_TYPE, val=.1, units="unitless")
+            Aircraft.Wing.MOUNT_LOCATION, val=.1, units="unitless")
         self.prob.model.set_input_defaults(
             Aircraft.Wing.ASPECT_RATIO, val=19.565, units="unitless"
         )

aviary/variable_info/variable_meta_data.py

@@ -5775,11 +5775,12 @@
 )
 
 add_meta_data(
-    Aircraft.Wing.MOUNTING_TYPE,
+    Aircraft.Wing.MOUNT_LOCATION,
     meta_data=_MetaData,
     historical_name={"GASP": 'INGASP.HWING', "FLOPS": None, "LEAPS1": None},
     units='unitless',
-    desc='wing location on fuselage (0 = low wing, 1 = high wing)',
+    desc='wing mount location on fuselage (0 = low wing, 1 = high wing)',
+    default_value=0.0,
 )
 
 add_meta_data(

aviary/variable_info/variables.py

@@ -572,7 +572,7 @@ class Wing:
         MIN_PRESSURE_LOCATION = 'aircraft:wing:min_pressure_location'
         MISC_MASS = 'aircraft:wing:misc_mass'
         MISC_MASS_SCALER = 'aircraft:wing:misc_mass_scaler'
-        MOUNTING_TYPE = 'aircraft:wing:mounting_type'
+        MOUNT_LOCATION = 'aircraft:wing:mount_location'
         NUM_FLAP_SEGMENTS = 'aircraft:wing:num_flap_segments'
         NUM_INTEGRATION_STATIONS = 'aircraft:wing:num_integration_stations'
         OPTIMUM_FLAP_DEFLECTION = 'aircraft:wing:optimum_flap_deflection'

aviary/visualization/aircraft_3d_model.py

@@ -539,7 +539,7 @@ class HorizontalWing(object):
         Chord at the top of the wing.
     _position_along_fuselage : float
         Position of the wing along the fuselage.
-    _mounting_type : float
+    _mount_location : float
         wing location on fuselage (0 = low wing, 1 = high wing, can be fractions).
     _fuselage : Fuselage
         The Fuselage object used to represent the fuselage of the aircraft.
@@ -556,7 +556,7 @@ def __init__(self, reader, fuselage, wing_type):
         self._sweep_angle = None
         self._chord_tip = None
         self._position_along_fuselage = None
-        self._mounting_type = None
+        self._mount_location = None
         self._fuselage = fuselage
         self._wing_type = wing_type
 
@@ -601,13 +601,13 @@ def read_variables(self):
             self._chord_tip = self._chord * taper_ratio
             if self._wing_type == WingType.WING:
                 try:
-                    mounting_type = self._reader.get_variable_from_case(
-                        "aircraft:wing:mounting_type"
+                    mount_location = self._reader.get_variable_from_case(
+                        "aircraft:wing:mount_location"
                     )
                 except AircraftModelReaderError:
-                    mounting_type = 0.0
+                    mount_location = 0.0
                 self._vertical_position = (
-                    2.0 * (mounting_type - 0.5) * self._fuselage.radius
+                    2.0 * (mount_location - 0.5) * self._fuselage.radius
                 )
                 self._position_along_fuselage = 0.0
             elif self._wing_type == WingType.HORIZONTAL_TAIL: