update readme with new devices

README.md

@@ -10,7 +10,7 @@ and you can continue from there to your favourite target release.
 ## Install
 
 **Warning:** _This application should generally be safe to use for all supported
-devices. Still, overwriting a devices boot loader via OTA update is a risky
+devices. Still, overwriting a device's boot loader via OTA update is a risky
 operation. If something unexpected fails, your device may be bricked, unless you
 know how to flash a new firmware over a wired connection._
 
@@ -21,21 +21,39 @@ back to stock firmware._
 Before flashing this firmware, connect your device to a WIFI network with
 internet access. From your browser, open
 
-  * Shelly1 `http://shellyip/ota?url=http://dl.dasker.eu/firmware/mg2tasmota-Shelly1.zip`
+  * Shelly 1 `http://shellyip/ota?url=http://dl.dasker.eu/firmware/mg2tasmota-Shelly1.zip`
   	* Tasmota template: `{"NAME":"Shelly 1","GPIO":[0,0,0,0,21,82,0,0,0,0,0,0,0],"FLAG":0,"BASE":46}`
 
-  * Shelly1PM `http://shellyip/ota?url=http://dl.dasker.eu/firmware/mg2tasmota-Shelly1PM.zip`
+  * Shelly 1PM `http://shellyip/ota?url=http://dl.dasker.eu/firmware/mg2tasmota-Shelly1PM.zip`
   	* Tasmota template: `{"NAME":"Shelly 1PM","GPIO":[56,0,0,0,82,134,0,0,0,0,0,21,0],"FLAG":2,"BASE":18}`
-    
-  * ShellyPlugS `http://shellyip/ota?url=http://dl.dasker.eu/firmware/mg2tasmota-ShellyPlugS.zip`
+
+  * Shelly Plug S `http://shellyip/ota?url=http://dl.dasker.eu/firmware/mg2tasmota-ShellyPlugS.zip`
   	* Tasmota template: ` {"NAME":"Shelly Plug S","GPIO":[57,255,56,255,0,134,0,0,131,17,132,21,0],"FLAG":2,"BASE":45}`
-			
-  * Shelly2 `http://shellyip/ota?url=http://dl.dasker.eu/firmware/mg2tasmota-Shelly2.zip`
+
+  * Shelly 2 `http://shellyip/ota?url=http://dl.dasker.eu/firmware/mg2tasmota-Shelly2.zip`
   	* Tasmota template:`{"NAME":"Shelly 2","GPIO":[0,135,0,136,21,22,0,0,9,0,10,137,0],"FLAG":0,"BASE":47}`
-			
-  * Shelly2.5 `http://shellyip/ota?url=http://dl.dasker.eu/firmware/mg2tasmota-Shelly25.zip`
+
+  * Shelly 2.5 `http://shellyip/ota?url=http://dl.dasker.eu/firmware/mg2tasmota-Shelly25.zip`
   	* Tasmota template: `{"NAME":"Shelly 2.5","GPIO":[56,0,17,0,21,83,0,0,6,82,5,22,156],"FLAG":2,"BASE":18}`
 
+  * Shelly RGBW2 `http://shellyip/ota?url=http://dl.dasker.eu/firmware/mg2tasmota-ShellyRGBW2.zip`
+  	* Tasmota template: `{"NAME":"Shelly RGBW2","GPIO":[0,0,52,0,40,255,0,0,37,17,39,38,0],"FLAG":0,"BASE":18}`
+
+  * Shelly Dimmer 1 `http://shellyip/ota?url=http://dl.dasker.eu/firmware/mg2tasmota-ShellyDimmer1.zip`
+  	* Tasmota template: **not yet available, only flash if you a perfectly certain about what you are doing**
+
+  * Shelly Dimmer 2 `http://shellyip/ota?url=http://dl.dasker.eu/firmware/mg2tasmota-ShellyDimmer2.zip`
+  	* Tasmota template: **not yet available, only flash if you a perfectly certain about what you are doing**
+
+  * Shelly EM `http://shellyip/ota?url=http://dl.dasker.eu/firmware/mg2tasmota-ShellyEM.zip`
+  	* Tasmota template: `{"NAME":"Shelly EM","GPIO":[0,0,0,0,0,0,0,0,6,156,5,21,0],"FLAG":15,"BASE":18}`
+
+  * Shelly Bulb `http://shellyip/ota?url=http://dl.dasker.eu/firmware/mg2tasmota-ShellyBulb.zip`
+  	* Tasmota template: **not yet available, only flash if you a perfectly certain about what you are doing**
+
+  * Shelly Vintage `http://shellyip/ota?url=http://dl.dasker.eu/firmware/mg2tasmota-ShellyVintage.zip`
+  	* Tasmota template: **not yet available, only flash if you a perfectly certain about what you are doing**
+
 replacing _shellyip_ with the IP address of your Shelly 1. The device will
 restart one or two times and attempt to download Tasmota. If this download
 succeeds, the device will restart again, and you will see a new WIFI network