Klipper + Palette 3 in accesory mode: Stops detecting pings during the print

[ThomasNyk]

Setup:
Printer Running Klipper
Palette 3 in accessory mode
P2PP: 9.01.05
PrusaSlicer: 2.8.1

Printer Config:

;P2PP PALETTE3
;P2PP PRINTERPROFILE=56a564b6077fa7bb84ea1c9097193a28
;P2PP ABSOLUTEEXTRUDER
;P2PP ACCESSORYMODE_MAFX
;P2PP KLIPPER_TOOLCHANGE

;P2PP P3_UPLOADFILE
;P2PP P3_HOSTNAME=<removed>

;P2PP SPLICEOFFSET=37
;P2PP MINSTARTSPLICE=130
;P2PP MINSPLICE=90
;P2PP EXTRAENDFILAMENT=100

;P2PP LINEARPINGLENGTH=100
;;P2PP LINEARPINGLENGTH=350

;P2PP MATERIAL_DEFAULT_0_0_0
;P2PP MATERIAL_PLA_PLA_0_0_0
;P2PP MATERIAL_ABS_ABS_0_0_0
;P2PP MATERIAL_PET_PET_0_0_0
;P2PP MATERIAL_PETG_PETG_0_0_0
;P2PP MATERIAL_PLA_PETG_2_2_0
;P2PP MATERIAL_PETG_PLA_2_1_0

;P2PP CHECKVERSION

;P2PP CONFIGEND

Issue:
After starting the print, the first few pings are detected fine. At LINEARPINGLENGTH=350, only one ping gets detected, at LINEARPINGLENGTH=100, the first 8 gets detected(out of 91):

8: 99.13%
7: MISSED
6: MISSED
5: 99.39%
4: 99.39%
3: 100.10%
2: 101.26%
1: 101.97%

Attached is mafx file and Gcode(processed and unprocessed) in a zip file
Colleciton.zip