3D printable vintage Nintendo style case for the BCD‐0o27

With a nod to an ancient Nintendo ;-)

Contents

1 Materials used for printing and constructing

1.1 Resins used (SLA Printer: Anycubic Photon Mono X 6K)

1.2 Finishing of transparent components

1.3 Required mounting materials such as heat inserts, nuts and bolts

2 Exploded view

3 Building instructions

4 Tip: Two ways of making a two colour ‘Nontendo’ logo

5 Nintendo style hand bracelet

Materials used for printing and constructing

Filaments used (FDM Printer: Voron 2.4-350)

• Top Cover: Amazon Basics PLA White (need to print in PLA because threaded heat inserts are used).

Used a resin printer for all other parts to get maximum print quality.

Resins used (SLA Printer: Anycubic Photon Mono X 6K)

• Black parts:

  • Elegoo Water Washable Photopolymer Resin, 1/1 mixture of Black and Smokey Black (The mixture produces better and stronger results than the components alone).

• Red parts:

  • Elegoo Water Washable Photopolymer Resin, Red.

• White parts (except top cover)

  • Elegoo Water Washable Photopolymer Resin, White

• Blue parts (only bottom cover)

  • Elegoo Water Washable Photopolymer Resin, Red

Finishing of transparent components

The transparent components (red and blue) are sanded, polished and lacquered to give the appearance of being made of glass.

Required mounting materials such as heat inserts, nuts and bolts.

• 4 – M3 heat inserts

• 4 – M3x10mm zinc plated steel Hex Drive Flat Head Screw

• 10 – M2x7mm zinc plated steel socket head screw

• 8 – M2 zinc plated steel hex nut

Exploded view

Building instructions

Tip: Two ways of making a two colour ‘Nontendo’ logo

Nintendo style hand bracelet

If you like the hand bracelet, you can order it here:

https://www.amazon.nl/dp/B09PG46FR1?psc=1&ref=ppx_yo2ov_dt_b_product_details&language=en_GB

There are no holes for the hand bracelet in the original design. You will have to drill them, yourselves.

Have FUN…!!!