Merge remote-tracking branch 'origin/master'

meta/cn.md

@@ -4,7 +4,7 @@ This file is auto-generated and automatically updated. Do not modify this file m
 
 <table>
 <tr><th>Progress</th><th>Count</th></tr>
-<tr><td>97%</td><td>9 missing string(s)</td></tr>
+<tr><td>97%</td><td>10 missing string(s)</td></tr>
 </table>
 
 ### Missing strings
@@ -19,6 +19,9 @@ This file is auto-generated and automatically updated. Do not modify this file m
 <tr><td><code>gft_fail</code></td><td>Test failed</td></tr>
 <tr><td><code>nc_anc_one</code></td><td>Noise cancelling with one earbud</td></tr>
 <tr><td><code>nc_anc_one_description</code></td><td>Noise cancelling normally requires two earbuds to prevent discomfort, enable this to allow noise cancelling with only one earbud</td></tr>
+<tr><td><code>fw_select_verify_model_mismatch_fail</code></td><td>Device model mismatch detected! The firmware transfer has been cancelled.
+
+You are attempting to flash a firmware for the {0} onto your {1}. This can permanently brick your earbuds.</td></tr>
 <tr><td><code>window_open</code></td><td>Open</td></tr>
 
 </table>

meta/cz.md

@@ -4,7 +4,7 @@ This file is auto-generated and automatically updated. Do not modify this file m
 
 <table>
 <tr><th>Progress</th><th>Count</th></tr>
-<tr><td>97%</td><td>9 missing string(s)</td></tr>
+<tr><td>97%</td><td>10 missing string(s)</td></tr>
 </table>
 
 ### Missing strings
@@ -19,6 +19,9 @@ This file is auto-generated and automatically updated. Do not modify this file m
 <tr><td><code>gft_fail</code></td><td>Test failed</td></tr>
 <tr><td><code>nc_anc_one</code></td><td>Noise cancelling with one earbud</td></tr>
 <tr><td><code>nc_anc_one_description</code></td><td>Noise cancelling normally requires two earbuds to prevent discomfort, enable this to allow noise cancelling with only one earbud</td></tr>
+<tr><td><code>fw_select_verify_model_mismatch_fail</code></td><td>Device model mismatch detected! The firmware transfer has been cancelled.
+
+You are attempting to flash a firmware for the {0} onto your {1}. This can permanently brick your earbuds.</td></tr>
 <tr><td><code>window_open</code></td><td>Open</td></tr>
 
 </table>

meta/de.md

@@ -4,7 +4,7 @@ This file is auto-generated and automatically updated. Do not modify this file m
 
 <table>
 <tr><th>Progress</th><th>Count</th></tr>
-<tr><td>96%</td><td>14 missing string(s)</td></tr>
+<tr><td>96%</td><td>15 missing string(s)</td></tr>
 </table>
 
 ### Missing strings
@@ -20,6 +20,9 @@ This file is auto-generated and automatically updated. Do not modify this file m
 <tr><td><code>gft_fail</code></td><td>Test failed</td></tr>
 <tr><td><code>nc_anc_one</code></td><td>Noise cancelling with one earbud</td></tr>
 <tr><td><code>nc_anc_one_description</code></td><td>Noise cancelling normally requires two earbuds to prevent discomfort, enable this to allow noise cancelling with only one earbud</td></tr>
+<tr><td><code>fw_select_verify_model_mismatch_fail</code></td><td>Device model mismatch detected! The firmware transfer has been cancelled.
+
+You are attempting to flash a firmware for the {0} onto your {1}. This can permanently brick your earbuds.</td></tr>
 <tr><td><code>window_open</code></td><td>Open</td></tr>
 <tr><td><code>manualpair_title</code></td><td>Manual device selection</td></tr>
 <tr><td><code>manualpair_title_dialog</code></td><td>Choose your Galaxy Buds device</td></tr>

meta/es.md

@@ -4,7 +4,7 @@ This file is auto-generated and automatically updated. Do not modify this file m
 
 <table>
 <tr><th>Progress</th><th>Count</th></tr>
-<tr><td>46%</td><td>235 missing string(s)</td></tr>
+<tr><td>46%</td><td>236 missing string(s)</td></tr>
 </table>
 
 ### Missing strings
@@ -215,6 +215,9 @@ Press 'Continue' to select a firmware binary.</td></tr>
 <tr><td><code>fw_select_http_error</code></td><td>HTTP error code:</td></tr>
 <tr><td><code>fw_select_unknown_build</code></td><td>Unknown build name</td></tr>
 <tr><td><code>fw_select_verify_fail</code></td><td>Failed to verify firmware</td></tr>
+<tr><td><code>fw_select_verify_model_mismatch_fail</code></td><td>Device model mismatch detected! The firmware transfer has been cancelled.
+
+You are attempting to flash a firmware for the {0} onto your {1}. This can permanently brick your earbuds.</td></tr>
 <tr><td><code>fw_select_confirm</code></td><td>You are about to flash '{0}' onto your '{1}' device</td></tr>
 <tr><td><code>fw_select_confirm_desc</code></td><td>Make sure this information is correct, otherwise press 'Cancel' and double-check your setup.
 

meta/fr.md

@@ -4,7 +4,7 @@ This file is auto-generated and automatically updated. Do not modify this file m
 
 <table>
 <tr><th>Progress</th><th>Count</th></tr>
-<tr><td>89%</td><td>46 missing string(s)</td></tr>
+<tr><td>89%</td><td>47 missing string(s)</td></tr>
 </table>
 
 ### Missing strings
@@ -48,6 +48,9 @@ This file is auto-generated and automatically updated. Do not modify this file m
 <tr><td><code>nc_as_custom_tone_soft</code></td><td>Soft</td></tr>
 <tr><td><code>nc_as_custom_tone_neutral</code></td><td>Neutral</td></tr>
 <tr><td><code>nc_as_custom_vol_normal</code></td><td>Normal</td></tr>
+<tr><td><code>fw_select_verify_model_mismatch_fail</code></td><td>Device model mismatch detected! The firmware transfer has been cancelled.
+
+You are attempting to flash a firmware for the {0} onto your {1}. This can permanently brick your earbuds.</td></tr>
 <tr><td><code>window_open</code></td><td>Open</td></tr>
 <tr><td><code>budsapp_header</code></td><td>Bluetooth compatibility info</td></tr>
 <tr><td><code>budsapp_text_p1</code></td><td>The official Galaxy Buds app for Windows 10 is installed alongside this application.</td></tr>

meta/gr.md

@@ -4,7 +4,7 @@ This file is auto-generated and automatically updated. Do not modify this file m
 
 <table>
 <tr><th>Progress</th><th>Count</th></tr>
-<tr><td>73%</td><td>115 missing string(s)</td></tr>
+<tr><td>73%</td><td>116 missing string(s)</td></tr>
 </table>
 
 ### Missing strings
@@ -94,6 +94,9 @@ Press 'Continue' to select a firmware binary.</td></tr>
 <tr><td><code>fw_select_http_error</code></td><td>HTTP error code:</td></tr>
 <tr><td><code>fw_select_unknown_build</code></td><td>Unknown build name</td></tr>
 <tr><td><code>fw_select_verify_fail</code></td><td>Failed to verify firmware</td></tr>
+<tr><td><code>fw_select_verify_model_mismatch_fail</code></td><td>Device model mismatch detected! The firmware transfer has been cancelled.
+
+You are attempting to flash a firmware for the {0} onto your {1}. This can permanently brick your earbuds.</td></tr>
 <tr><td><code>fw_select_confirm</code></td><td>You are about to flash '{0}' onto your '{1}' device</td></tr>
 <tr><td><code>fw_select_confirm_desc</code></td><td>Make sure this information is correct, otherwise press 'Cancel' and double-check your setup.
 

meta/hu.md

@@ -4,7 +4,7 @@ This file is auto-generated and automatically updated. Do not modify this file m
 
 <table>
 <tr><th>Progress</th><th>Count</th></tr>
-<tr><td>96%</td><td>14 missing string(s)</td></tr>
+<tr><td>96%</td><td>15 missing string(s)</td></tr>
 </table>
 
 ### Missing strings
@@ -20,6 +20,9 @@ This file is auto-generated and automatically updated. Do not modify this file m
 <tr><td><code>gft_fail</code></td><td>Test failed</td></tr>
 <tr><td><code>nc_anc_one</code></td><td>Noise cancelling with one earbud</td></tr>
 <tr><td><code>nc_anc_one_description</code></td><td>Noise cancelling normally requires two earbuds to prevent discomfort, enable this to allow noise cancelling with only one earbud</td></tr>
+<tr><td><code>fw_select_verify_model_mismatch_fail</code></td><td>Device model mismatch detected! The firmware transfer has been cancelled.
+
+You are attempting to flash a firmware for the {0} onto your {1}. This can permanently brick your earbuds.</td></tr>
 <tr><td><code>window_open</code></td><td>Open</td></tr>
 <tr><td><code>manualpair_title</code></td><td>Manual device selection</td></tr>
 <tr><td><code>manualpair_title_dialog</code></td><td>Choose your Galaxy Buds device</td></tr>

meta/il.md

@@ -4,7 +4,7 @@ This file is auto-generated and automatically updated. Do not modify this file m
 
 <table>
 <tr><th>Progress</th><th>Count</th></tr>
-<tr><td>96%</td><td>14 missing string(s)</td></tr>
+<tr><td>96%</td><td>15 missing string(s)</td></tr>
 </table>
 
 ### Missing strings
@@ -20,6 +20,9 @@ This file is auto-generated and automatically updated. Do not modify this file m
 <tr><td><code>gft_fail</code></td><td>Test failed</td></tr>
 <tr><td><code>nc_anc_one</code></td><td>Noise cancelling with one earbud</td></tr>
 <tr><td><code>nc_anc_one_description</code></td><td>Noise cancelling normally requires two earbuds to prevent discomfort, enable this to allow noise cancelling with only one earbud</td></tr>
+<tr><td><code>fw_select_verify_model_mismatch_fail</code></td><td>Device model mismatch detected! The firmware transfer has been cancelled.
+
+You are attempting to flash a firmware for the {0} onto your {1}. This can permanently brick your earbuds.</td></tr>
 <tr><td><code>window_open</code></td><td>Open</td></tr>
 <tr><td><code>manualpair_title</code></td><td>Manual device selection</td></tr>
 <tr><td><code>manualpair_title_dialog</code></td><td>Choose your Galaxy Buds device</td></tr>

meta/in.md

@@ -4,7 +4,7 @@ This file is auto-generated and automatically updated. Do not modify this file m
 
 <table>
 <tr><th>Progress</th><th>Count</th></tr>
-<tr><td>47%</td><td>232 missing string(s)</td></tr>
+<tr><td>47%</td><td>233 missing string(s)</td></tr>
 </table>
 
 ### Missing strings
@@ -212,6 +212,9 @@ Press 'Continue' to select a firmware binary.</td></tr>
 <tr><td><code>fw_select_http_error</code></td><td>HTTP error code:</td></tr>
 <tr><td><code>fw_select_unknown_build</code></td><td>Unknown build name</td></tr>
 <tr><td><code>fw_select_verify_fail</code></td><td>Failed to verify firmware</td></tr>
+<tr><td><code>fw_select_verify_model_mismatch_fail</code></td><td>Device model mismatch detected! The firmware transfer has been cancelled.
+
+You are attempting to flash a firmware for the {0} onto your {1}. This can permanently brick your earbuds.</td></tr>
 <tr><td><code>fw_select_confirm</code></td><td>You are about to flash '{0}' onto your '{1}' device</td></tr>
 <tr><td><code>fw_select_confirm_desc</code></td><td>Make sure this information is correct, otherwise press 'Cancel' and double-check your setup.
 

meta/it.md

@@ -4,7 +4,7 @@ This file is auto-generated and automatically updated. Do not modify this file m
 
 <table>
 <tr><th>Progress</th><th>Count</th></tr>
-<tr><td>75%</td><td>107 missing string(s)</td></tr>
+<tr><td>75%</td><td>108 missing string(s)</td></tr>
 </table>
 
 ### Missing strings
@@ -122,6 +122,9 @@ If the transmission is stuck or the device disconnected prematurely, you need to
 The remap configuration is only active on this device. If you connect your earbuds to a Samsung device, voice wakeup will activate Bixby normally. On other devices than this device and non-Samsung phones, this feature won't trigger any action.</td></tr>
 <tr><td><code>credits_sponsor</code></td><td>Sponsor this project</td></tr>
 <tr><td><code>connlost_disconnected</code></td><td>Device disconnected</td></tr>
+<tr><td><code>fw_select_verify_model_mismatch_fail</code></td><td>Device model mismatch detected! The firmware transfer has been cancelled.
+
+You are attempting to flash a firmware for the {0} onto your {1}. This can permanently brick your earbuds.</td></tr>
 <tr><td><code>window_open</code></td><td>Open</td></tr>
 
 </table>

meta/ja.md

@@ -4,7 +4,7 @@ This file is auto-generated and automatically updated. Do not modify this file m
 
 <table>
 <tr><th>Progress</th><th>Count</th></tr>
-<tr><td>46%</td><td>235 missing string(s)</td></tr>
+<tr><td>46%</td><td>236 missing string(s)</td></tr>
 </table>
 
 ### Missing strings
@@ -215,6 +215,9 @@ Press 'Continue' to select a firmware binary.</td></tr>
 <tr><td><code>fw_select_http_error</code></td><td>HTTP error code:</td></tr>
 <tr><td><code>fw_select_unknown_build</code></td><td>Unknown build name</td></tr>
 <tr><td><code>fw_select_verify_fail</code></td><td>Failed to verify firmware</td></tr>
+<tr><td><code>fw_select_verify_model_mismatch_fail</code></td><td>Device model mismatch detected! The firmware transfer has been cancelled.
+
+You are attempting to flash a firmware for the {0} onto your {1}. This can permanently brick your earbuds.</td></tr>
 <tr><td><code>fw_select_confirm</code></td><td>You are about to flash '{0}' onto your '{1}' device</td></tr>
 <tr><td><code>fw_select_confirm_desc</code></td><td>Make sure this information is correct, otherwise press 'Cancel' and double-check your setup.
 

meta/ko.md

@@ -4,7 +4,7 @@ This file is auto-generated and automatically updated. Do not modify this file m
 
 <table>
 <tr><th>Progress</th><th>Count</th></tr>
-<tr><td>97%</td><td>9 missing string(s)</td></tr>
+<tr><td>97%</td><td>10 missing string(s)</td></tr>
 </table>
 
 ### Missing strings
@@ -19,6 +19,9 @@ This file is auto-generated and automatically updated. Do not modify this file m
 <tr><td><code>gft_fail</code></td><td>Test failed</td></tr>
 <tr><td><code>nc_anc_one</code></td><td>Noise cancelling with one earbud</td></tr>
 <tr><td><code>nc_anc_one_description</code></td><td>Noise cancelling normally requires two earbuds to prevent discomfort, enable this to allow noise cancelling with only one earbud</td></tr>
+<tr><td><code>fw_select_verify_model_mismatch_fail</code></td><td>Device model mismatch detected! The firmware transfer has been cancelled.
+
+You are attempting to flash a firmware for the {0} onto your {1}. This can permanently brick your earbuds.</td></tr>
 <tr><td><code>window_open</code></td><td>Open</td></tr>
 
 </table>

meta/nl.md

@@ -4,7 +4,7 @@ This file is auto-generated and automatically updated. Do not modify this file m
 
 <table>
 <tr><th>Progress</th><th>Count</th></tr>
-<tr><td>97%</td><td>9 missing string(s)</td></tr>
+<tr><td>97%</td><td>10 missing string(s)</td></tr>
 </table>
 
 ### Missing strings
@@ -19,6 +19,9 @@ This file is auto-generated and automatically updated. Do not modify this file m
 <tr><td><code>gft_fail</code></td><td>Test failed</td></tr>
 <tr><td><code>nc_anc_one</code></td><td>Noise cancelling with one earbud</td></tr>
 <tr><td><code>nc_anc_one_description</code></td><td>Noise cancelling normally requires two earbuds to prevent discomfort, enable this to allow noise cancelling with only one earbud</td></tr>
+<tr><td><code>fw_select_verify_model_mismatch_fail</code></td><td>Device model mismatch detected! The firmware transfer has been cancelled.
+
+You are attempting to flash a firmware for the {0} onto your {1}. This can permanently brick your earbuds.</td></tr>
 <tr><td><code>window_open</code></td><td>Open</td></tr>
 
 </table>

meta/pt.md

@@ -4,7 +4,7 @@ This file is auto-generated and automatically updated. Do not modify this file m
 
 <table>
 <tr><th>Progress</th><th>Count</th></tr>
-<tr><td>47%</td><td>232 missing string(s)</td></tr>
+<tr><td>47%</td><td>233 missing string(s)</td></tr>
 </table>
 
 ### Missing strings
@@ -212,6 +212,9 @@ Press 'Continue' to select a firmware binary.</td></tr>
 <tr><td><code>fw_select_http_error</code></td><td>HTTP error code:</td></tr>
 <tr><td><code>fw_select_unknown_build</code></td><td>Unknown build name</td></tr>
 <tr><td><code>fw_select_verify_fail</code></td><td>Failed to verify firmware</td></tr>
+<tr><td><code>fw_select_verify_model_mismatch_fail</code></td><td>Device model mismatch detected! The firmware transfer has been cancelled.
+
+You are attempting to flash a firmware for the {0} onto your {1}. This can permanently brick your earbuds.</td></tr>
 <tr><td><code>fw_select_confirm</code></td><td>You are about to flash '{0}' onto your '{1}' device</td></tr>
 <tr><td><code>fw_select_confirm_desc</code></td><td>Make sure this information is correct, otherwise press 'Cancel' and double-check your setup.
 

meta/ro.md

@@ -4,7 +4,7 @@ This file is auto-generated and automatically updated. Do not modify this file m
 
 <table>
 <tr><th>Progress</th><th>Count</th></tr>
-<tr><td>89%</td><td>46 missing string(s)</td></tr>
+<tr><td>89%</td><td>47 missing string(s)</td></tr>
 </table>
 
 ### Missing strings
@@ -48,6 +48,9 @@ This file is auto-generated and automatically updated. Do not modify this file m
 <tr><td><code>nc_as_custom_tone_soft</code></td><td>Soft</td></tr>
 <tr><td><code>nc_as_custom_tone_neutral</code></td><td>Neutral</td></tr>
 <tr><td><code>nc_as_custom_vol_normal</code></td><td>Normal</td></tr>
+<tr><td><code>fw_select_verify_model_mismatch_fail</code></td><td>Device model mismatch detected! The firmware transfer has been cancelled.
+
+You are attempting to flash a firmware for the {0} onto your {1}. This can permanently brick your earbuds.</td></tr>
 <tr><td><code>window_open</code></td><td>Open</td></tr>
 <tr><td><code>budsapp_header</code></td><td>Bluetooth compatibility info</td></tr>
 <tr><td><code>budsapp_text_p1</code></td><td>The official Galaxy Buds app for Windows 10 is installed alongside this application.</td></tr>

meta/ru.md

@@ -4,7 +4,7 @@ This file is auto-generated and automatically updated. Do not modify this file m
 
 <table>
 <tr><th>Progress</th><th>Count</th></tr>
-<tr><td>94%</td><td>25 missing string(s)</td></tr>
+<tr><td>94%</td><td>26 missing string(s)</td></tr>
 </table>
 
 ### Missing strings
@@ -30,6 +30,9 @@ This file is auto-generated and automatically updated. Do not modify this file m
 <tr><td><code>nc_anc_one_description</code></td><td>Noise cancelling normally requires two earbuds to prevent discomfort, enable this to allow noise cancelling with only one earbud</td></tr>
 <tr><td><code>nc_ambient</code></td><td>Customize ambient sound</td></tr>
 <tr><td><code>nc_ambient_description</code></td><td>Configure ambient sound tone and volume (if available)</td></tr>
+<tr><td><code>fw_select_verify_model_mismatch_fail</code></td><td>Device model mismatch detected! The firmware transfer has been cancelled.
+
+You are attempting to flash a firmware for the {0} onto your {1}. This can permanently brick your earbuds.</td></tr>
 <tr><td><code>window_open</code></td><td>Open</td></tr>
 <tr><td><code>budsapp_text_p2</code></td><td>If it is open and connected, GalaxyBudsClient might have issues connecting to your earbuds. Make sure to close it before continuing. Likewise, the official Galaxy Buds app can't connect to your earbuds while Galaxy Buds Manager is active and has opened connections to the earbuds.</td></tr>
 <tr><td><code>manualpair_title</code></td><td>Manual device selection</td></tr>

meta/tr.md

@@ -4,7 +4,7 @@ This file is auto-generated and automatically updated. Do not modify this file m
 
 <table>
 <tr><th>Progress</th><th>Count</th></tr>
-<tr><td>97%</td><td>11 missing string(s)</td></tr>
+<tr><td>97%</td><td>12 missing string(s)</td></tr>
 </table>
 
 ### Missing strings
@@ -21,6 +21,9 @@ This file is auto-generated and automatically updated. Do not modify this file m
 <tr><td><code>nc_anc_one</code></td><td>Noise cancelling with one earbud</td></tr>
 <tr><td><code>nc_anc_one_description</code></td><td>Noise cancelling normally requires two earbuds to prevent discomfort, enable this to allow noise cancelling with only one earbud</td></tr>
 <tr><td><code>connlost_disconnected</code></td><td>Device disconnected</td></tr>
+<tr><td><code>fw_select_verify_model_mismatch_fail</code></td><td>Device model mismatch detected! The firmware transfer has been cancelled.
+
+You are attempting to flash a firmware for the {0} onto your {1}. This can permanently brick your earbuds.</td></tr>
 <tr><td><code>window_open</code></td><td>Open</td></tr>
 
 </table>