Skip to content

thunder/search_api_solr

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Search API Solr

This module provides an implementation of the Search API which uses an Apache Solr search server for indexing and searching. Before enabling or using this module, you'll have to carefully read all the instructions given here.

The minimum support version Solr version is 6.4. Any version below might work if you use your own Solr config or if you enable the optional search_api_solr_legacy sub-module that is included in this module.

In general, it is highly recommended to run Solr in cloud mode (Solr Cloud)!

For a full description of the module, visit the project page.

Submit bug reports and feature suggestions, or track changes in the issue queue.

Read the Search API Solr Documentation.

Table of contents

  • Requirements
  • Installation
  • Local Solr Instance: : Solr Cloud - the modern way
  • Local Solr Instance: : Solr (single core) - the classic way
  • Local Solr Instance: : Solr Cloud - the classic way
  • Using Jump-Start config-sets and docker images
  • Updating Solr
  • Search API Solr features
  • Customizing your Solr server
  • Troubleshooting Views
  • Troubleshooting Facets
  • Development
  • Maintainers

Requirements

This module requires the Search API module, as well as several external libraries, which will be installed automatically by Composer, which manages its dependencies.

Installation

Install as you would normally install a contributed Drupal module. For further information, see Installing Drupal Modules.

To connect a Solr server, follow the Search API documentation to add a Search API Server and select Solr as backend.

The Search API Solr Backend supports different Solr Connector Plugins. Choose and configure the one that matches your requirements. Some Solr service providers require a special connector to be installed as third-party module. (See the Connectors section below.)

Local Solr Instance: Solr Cloud - the modern way

To setup Solr in Cloud mode locally you can either follow the instructions of the Apache Solr Reference Guide or use docker-compose with https://github.com/docker-solr/docker-solr-examples/blob/master/docker-compose/docker-compose.yml

The preferred way for local development is to use DDEV where you can easily add ddev-solr using this command:

$ ddev get ddev/ddev-solr
$ ddev restart

For Drupal and Search API Solr you need to configure a Search API server using Solr as backend and Solr Cloud with Basic Auth as its connector. As mentioned above, username "solr" and password "SolrRocks" are the pre-configured credentials for Basic Authentication in .ddev/solr/security.json.

Solr requires a Drupal-specific configset for any collection that should be used to index Drupal's content. (In Solr Cloud "collections" are the equivalent to "cores" in classic Solr installations. Actually, in a big Solr Cloud installation a collection might consist of multiple cores across all Solr Cloud nodes.)

Starting from Search API Solr module version 4.2.1 you don't need to deal with configsets manually anymore. Just enable the search_api_solr_admin sub-module which is part of Search API Solr. Now you create or update your "collections" at any time by clicking the "Upload Configset" button on the Search API server details page (see installation steps below), or use drush to do this with

$ ddev drush --numShards=1 search-api-solr:upload-configset SEARCH_API_SERVER_ID

Note: Replace SEARCH_API_SERVER_ID with your Search API server machine name. The number of "shards" should always be "1" as this local installation only runs a single Solr node.

Note: The search_api_solr_admin sub-module and its features are not limited to ddev! They work with any Solr Cloud instance as long as the required APIs are not blocked by the hosting provider.

Installation steps

  1. Enable the search_api_solr_admin module. (This sub-module is included in Search API Solr >= 4.2.1)
  2. Create a search server using the Solr backend and select Solr Cloud with Basic Auth as connector:
    • HTTP protocol: http
    • Solr node: solr
    • Solr port: 8983
    • Solr path: /
    • Default Solr collection: techproducts (You can define any name here. The collection will be created automatically.)
    • Username: solr
    • Password: SolrRocks
  3. On the server's "view" page click the Upload Configset button and check the "Upload (and overwrite) configset" checkbox.
  4. Set the number of shards to 1.
  5. Press Upload.Once Solr is running with DDEV you don't need to deal with any configset

Local Solr Instance: Solr (single core) - the classic way

In order for this module to work, you need to set up a Solr server. For this, you can either purchase a server from a web Solr hosts or set up your own Solr server on your web server (if you have the necessary rights to do so). If you want to use a hosted solution, a number of companies are listed on the module's project page. Otherwise, please follow the instructions in this section.

Note: A more detailed set of instructions is available at:

As a pre-requisite for running your own Solr server, you'll need a Java JRE.

Download the latest version of Solr 8.x from https://lucene.apache.org/solr/downloads.html and unpack the archive somewhere outside of your web server's document tree. The unpacked Solr directory is named $SOLR in these instructions.

Note: Solr 6.x is still supported by search_api_solr but strongly discouraged. That version has been declared end-of-life by the Apache Solr project and is thus no longer supported by them.

Before creating the Solr core ($CORE) you will have to make sure it uses the proper configuration files. They aren't always static but vary on your Drupal setup.

But the Search API Solr Search module will create the correct configs for you!

  1. Make sure you have Apache Solr started and accessible (i.e. via port 8983). You can start it without having a core configured at this stage.
  2. Visit Drupal configuration (/admin/config/search/search-api) and create a new Search API Server according to the search_api documentation using "Solr" as Backend and the connector that matches your setup. Input the correct core name (which you will create at step 4, below).
  3. Download the config.zip from the server's details page or by using drush solr-gsc with proper options, for example for a server named "my_solr_server": drush solr-gsc my_solr_server config.zip 8.4.
  4. Copy the config.zip to the Solr server and extract. The unpacked configuration directory is named $CONF in these instructions.

Now you can create a Solr core using this config-set on a running Solr server. There are different ways to do so. For most Linux distributions you can run

$ sudo -u solr $SOLR/bin/solr create_core -c $CORE -d $CONF -n $CORE

You will see something like

$ sudo -u solr /opt/solr/bin/solr create_core -c test-core -d /tmp/solr-conf -n test-core

Copying configuration to new core instance directory: /var/solr/data/test-core

If you're forced to create the core before you can run Drupal to generate the config-set you could also use the appropriate jump-start config-set you'll find in the jump-start directory of this module.

You must not create a core without a proper drupal config-set! If you do so - even by accident - you won't recognize it immediately. But you'll run into trouble like this soon: SolrException: Can not use FieldCache on multivalued field: boost_document

Note: Every time you add a new language to your Drupal instance or add a custom Solr Field Type you have to update your core configuration files. Using the example above they will be located in /var/solr/data/test-core/conf. The Drupal admin UI should inform you about the requirement to update the configuration. Reload the core after updating the config using curl -k http://localhost:8983/solr/admin/cores?action=RELOAD&core=$CORE on the command line or enable the search_api_admin sub-module to do it from the Drupal admin UI.

Note: There's file called solrcore.properties within the set of generated config files. If you need to fine tune some setting you should do it within this file if possible instead of modifying solrconf.xml.

Afterward, go to http://localhost:8983/solr/#/$CORE in your web browser to ensure Solr is running correctly.

CAUTION! For production sites, it is vital that you somehow prevent outside access to the Solr server. Otherwise, attackers could read, corrupt or delete all your indexed data. Using the server as described below WON'T prevent this by default! If it is available, the probably easiest way of preventing this is to disable outside access to the ports used by Solr through your server's network configuration or through the use of a firewall. Other options include adding basic HTTP authentication or renaming the solr/ directory to a random string of characters and using that as the path.

For configuring indexes and searches you have to follow the documentation of search_api.

Local Solr Instance: Solr Cloud - the classic way

Instead of a single core you have to create a collection in your Solr Cloud instance. To do so you have to read the Solr handbook.

  1. Create a Search API Server according to the search_api documentation using "Solr" or "Multilingual Solr" as Backend and the "Solr Cloud" or "Solr Cloud with Basic Auth" Connector.
  2. Download the config.zip from the server's details page or by using drush solr-gsc
  3. Deploy the config.zip via zookeeper.

Using Linux specific Solr Packages

Note: The paths where the config.zip needs to be extracted to might differ from the instructions above as well. For some distributions a directory like /var/solr or /usr/local/solr exists.

Local Solr Instance: Using Jump-Start config-sets and docker images

This module contains a jump-start directory where you'll find a docker-compose.yml files for various Solr versions. These use default config-sets that will work for most drupal use-cases. This variant is suitable for evaluation and development purposes.

These config-sets are also suitable for standard production use-cases without the need for advanced features or customizations.

Jump Start Config-Sets

Updating Solr

Whenever you update your Solr installation it is recommended that you generate a new config-set and deploy it. The deployment depends on the installation variation you choose before. It is also recommended to re-index yur content after an update. But if it is a minor update it should be safe to just queue all content for re-indexing.

When performing a major version update like from Solr 6 to Solr 8 it is recommended to delete the core or collection and recreate it like described in the installation instructions above.

Search API Solr features

All Search API datatypes are supported by using appropriate Solr datatypes for indexing them.

The "direct" parse mode for queries will result in the keys being directly used as the query to Solr using the Standard Parse Mode.

Adding Devel module (and optionally, addons like Kint) provides the site with a Solr Query Debugger and shows how content gets indexed.

Regarding third-party features, the following are supported:

  • autocomplete
    • Introduced by module: search_api_solr_autocomplete
    • Lets you add autocompletion capabilities to search forms on the site.
  • facets
    • Introduced by module: facet
    • Allows you to create facetted searches for dynamically filtering search results.
  • more like this
    • Introduced by module: search_api
    • Lets you display items that are similar to a given one. Use, e.g., to create a "More like this" block for node pages build with Views.
  • multisite
    • Introduced by module: search_api_solr
  • spellcheck
    • Introduced by module: search_api_solr
    • Views integration provided by search_api_spellcheck
  • attachments
    • Introduced by module: search_api_attachments
  • location
    • Introduced by module: search_api_location
  • NLP
    • Introduced by module: search_api_solr_nlp
    • Adds more fulltext field types based on natural language processing, for example field types that filter all word which aren't nouns. This is great for auto-completion.

If you feel some service option is missing, or have other ideas for improving this implementation, please file a feature request in the project's issue queue, at https://drupal.org/project/issues/search_api_solr.

Processors

Please consider that, since Solr handles tokenizing, stemming and other preprocessing tasks, activating any preprocessors in a search index' settings is usually not needed or even cumbersome. If you are adding an index to a Solr server you should therefore then disable all processors which handle such classic preprocessing tasks.

If you create a new index, such processors won't be offered anymore since 8.x-2.0.

But the remaining processors are useful and should be activated. For example the HTML filter or the Highlighting processor.

By default, the Highlighting processor provided by Search API uses PHP to create highlighted snippets or an excerpt based on the entities loaded from the database. Solr itself can do that much better, especially for different languages. If you check Retrieve result data from Solr and Highlight retrieved data on the index edit page, the Highlighting processor will use this data directly and bypass it's own logic. To do the highlighting, Solr will use the configuration of the Highlighting processor.

Connectors

The communication details between Drupal and Solr is implemented by connectors. This module includes:

  • Standard Connector
  • BasicAuth Connector
  • Solr Cloud Connector
  • Solr Cloud BasicAuth Connector

There are service provider specific connectors available, for example from Acquia, Pantheon, hosted solr, platform.sh, and others:

Please contact your provider for details if you don't run your own Solr server.

Customizing your Solr server

It's highly recommended that you don't modify the schema.xml and solrconfig.xml files manually because this module dynamically generates them for you.

Most features that can be configured within these config files are reflected by drupal configs that could be handled via drupal's own config management.

You can also create your own Solr field types by providing additional field config YAML files. Have a look at this module's config folder to see examples.

Such field types can target a specific Solr version and a "domain". For example "Apple" means two different things in a "fruits" domain or a "computer" domain.

Troubleshooting Views

When displaying search results from Solr in Views using the Search API Views integration, you have the choice to fetch the displayed values from Solr by enabling "Retrieve result data from Solr" on the server edit page. Otherwise, Solr will only return the IDs and Search API loads the values from the database.

If you decide to retrieve the values from Solr you have to enable "Skip item access checks" in the query options in the views advanced settings. Otherwise, the database objects will be loaded again for this check. It's obvious that you have to apply required access checks during indexing in this setup. For example using the corresponding processor or by having different indexes for different user roles.

In general, it's recommended to disable the Views cache. By default, the Solr search index is updated asynchronously from Drupal, and this interferes with the Views cache. Having the cache enabled will cause stale results to be shown, and new content might not show up at all.

In case you really need caching (for example because you are showing some search results on your front page) then you use the 'Search API (time based)' cache plugin. This will make sure the cache is cleared at certain time intervals, so your results will remain relevant. This can work well for views that have no exposed filters and are set up by site administrators.

Since 8.x-2.0 in combination with Solr 6.6 or higher you can also use the 'Search API (tag based)' cache. But in this case you need to ensure that you enable "Finalize index before first search" and "Wait for commit after last finalization" in the "Solr specific index options".

But be aware that this will slow down the first search after any modification to an index. So you have to choose if no caching or tag based caching in combination with finalization is the better solution for your setup. The decision depends on how frequent index modification happen or how expensive your queries are.

If you index some drupal fields multiple times in the same index and modify the single values differently via our API before the values get indexed, you'll notice that Views will randomly output the same value for all of these fields if you enabled "Retrieve result data from Solr". In this case you have to enable the "Solr dummy fields" processor and add as many dummy fields to the index as you require. Afterward you should manipulate these fields via API.

Troubleshooting Facets

Facetting on fulltext fields is not yet supported. We recommend the use of string fields for that purpose.

Trie based field types were deprecated in Solr 6 and with Solr 7 we switched to the point based equivalents. But lucene doesn't support a mincount of "0" for these field types. We recommend the use of string fields instead of numeric ones for that purpose.

If updating from Search API Solr 8.x-1.x or from Solr versions before 7 to Solr 7 or 8, check your Search API index' field configurations to avoid these errors that will lead to exceptions and zero results.

Development

Whenever you need to enhance the functionality you should do it using the API instead of extending the SearchApiSolrBackend class!

To customize connection-specific things you should provide your own implementation of the \Drupal\search_api_solr\SolrConnectorInterface.

A lot of customization can be achieved using YAML files and drupal's configuration management.

We leverage the solarium library. You can also interact with solarium's API using our hooks and callbacks or via event listeners. This way you can for example add any solr specific parameter to a query you need.

But if you create Search API Queries by yourself in code there's an easier way. You can simply set the required parameter as option prefixed by 'solr_param_'.

So these two lines are "similar":

$search_api_query->setOption('solr_param_mm', '75%');

$solarium_query->setParam('mm', '75%');

Patches and Issues Workflow

Our test suite includes integration tests that require a real Solr server. This requirement can't be provided by the drupal.org test infrastructure. Therefore, we leverage github workflows for our tests and had to establish a more complex workflow:

  1. Open an issue on drupal.org as usual
  2. Upload the patch for being reviewed to that issue on drupal.org as usual
  3. Fork https://github.com/mkalkbrenner/search_api_solr
  4. Apply your patch and file a PR on github
  5. Add a link to the github PR to the drupal.org issue

The PR on github will automatically be tested on github and the test results will be reflected in the PR conversation.

Running the test suite locally

This module comes with a suite of automated tests. To execute those, you just need to have a (correctly configured) Solr instance running at the following address:

http://localhost:8983/solr/drupal

This represents a core named "drupal" in a default installation of Solr.

As long as you're changes don't modify the config-set generation you could leverage docker, too. You'll find ready to use docker-compose files in the jump-start directory.

The tests themselves could be started by running something like this in your drupal folder:

$ phpunit -c core --group search_api_solr

(The exact command varies on your setup and paths.)

Maintainers

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • PHP 100.0%