Skip to content

Automatically exported from code.google.com/p/libperseus-sdr

License

LGPL-3.0, GPL-3.0 licenses found

Licenses found

LGPL-3.0
COPYING.LESSER
GPL-3.0
COPYING
Notifications You must be signed in to change notification settings

techn0mad/libperseus-sdr

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

37 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

#
# Perseus SDR
#
# GNU autoconf/automake package
#
# Andrea Montefusco IW0HDV (andrew at montefusco dot com)
#

#
# Install compiler and tools (Debian and derived distributions, e.g. Ubuntu)
#
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install gcc g++ make manpages-dev autoconf automake libtool subversion
#
# Install the prerequisite library
#
sudo apt-get install libusb-1.0-0-dev

#
# Fedora Core 11
#
# Get root status with the method you prefer, for example

su - root

# next install the prerequisite packages:

yum update
yum install gcc gcc-c++ man-pages autoconf automake libtool subversion
yum install libusb1 libusb1-devel

#
# Mandriva 2010
#
# Get root status with the method you prefer, for example

su - root

# next install the prerequisite packages:

urpmi gcc gcc-c++ man-pages autoconf automake subversion libtool make
urpmi -a libusb1


#
# download, compile and install the Perseus library
#
cd 
svn checkout http://libperseus-sdr.googlecode.com/svn/trunk/ libperseus-sdr
cd libperseus-sdr
sh bootstrap.sh
./configure && make
sudo make install
sudo ldconfig

# back to home directory
cd

#
# test the library
# note: the outputs shown below is in case the Perseus hardware is not linked
#
perseustest_dyn

# perseus: perseus_init()
# perseus: Found device with VID/PID 0000:0000 on BUS1 ADDR1
# perseus: Found device with VID/PID 0000:0000 on BUS2 ADDR1
# perseus: Found device with VID/PID 0000:0000 on BUS3 ADDR1
# perseus: Found device with VID/PID 0000:0000 on BUS4 ADDR1
# perseus: Found device with VID/PID 0000:0000 on BUS5 ADDR1
# perseus: poll libusb thread started...
# perseus: setting thread priority to 99...
# perseus: done
# 0 Perseus receivers found
# No Perseus receivers detected
# perseus: perseus_exit()
# ...
# ...


#
# setup udev system
# (for reference only ! now the make install procedure takes care to do that)
#
sudo groupadd perseususb
sudo usermod -a -G perseususb `whoami`
sudo udevadm control --reload-rules
#
# Now log off and on again in order to finally become member of 'perseususb'.
# A reboot is not needed.
#

#
# now, link your Perseus receiver to USB interface and plug the power supply
# you have to hear a click, led on receiver's front panel lights
#
# looking at filtered lsusb output you should see the following:
# (Bus and Device figures can vary)

lsusb | grep Cypress
Bus 001 Device 007: ID 04b4:325c Cypress Semiconductor Corp. 

#
# now try again the test program, you should see a lot of output (not shown here)
# and, overall, hear the relays clicking
#
cd
perseustest_dyn 

# ...
# 
# take care to one of the last messages, it should read as follows:
#
# perseus: Elapsed time: 10.003243 s - kSamples read: 2499 - Rate: 249.9 kS/s
#
# that above ends the build procedure.
#


#
# what if my distro doesn't support a binary package for libusb 1.0 ?
#
# go your home dir
cd ~ 
# download the package
wget http://downloads.sourceforge.net/libusb/libusb-1.0.6.tar.bz2
# unzip it
bunzip2 libusb-1.0.6.tar.bz2 
# create the directory tree
tar -xvf libusb-1.0.6.tar
# go into it
cd libusb-1.0.6
# configure, compile and install
./configure
make
sudo make install
sudo ldconfig










About

Automatically exported from code.google.com/p/libperseus-sdr

Resources

License

LGPL-3.0, GPL-3.0 licenses found

Licenses found

LGPL-3.0
COPYING.LESSER
GPL-3.0
COPYING

Stars

Watchers

Forks

Packages

No packages published