Tasmota changes

.github/workflows/release_zips.yml

@@ -10,8 +10,8 @@ jobs:
     name: Create release zip file
     runs-on: ubuntu-20.04
     steps:
-      - name: Create a recursive clone source zip
-        uses: espressif/github-actions/release_zips@master
+      - name: Create a recursive clone source and stripped zip
+        uses: Jason2866/github-actions/release_zips@release_idf
         env:
             RELEASE_PROJECT_NAME: ESP-IDF
             GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

CMakeLists.txt

@@ -179,6 +179,21 @@ if(CONFIG_COMPILER_DISABLE_GCC14_WARNINGS)
     list(APPEND compile_options "-Wno-calloc-transposed-args")
 endif()
 
+if(CONFIG_COMPILER_ENABLE_LTO)
+    set(CMAKE_AR ${_CMAKE_TOOLCHAIN_PREFIX}gcc-ar)
+    set(CMAKE_RANLIB ${_CMAKE_TOOLCHAIN_PREFIX}gcc-ranlib)
+    list(APPEND compile_options     "-flto=auto"
+                                    "-ffat-lto-objects"
+                                    "-flto-compression-level=9")
+    list(APPEND link_options        "-flto"
+                                    "-fuse-linker-plugin"
+                                    "-ffat-lto-objects"
+                                    "-flto-partition=max")
+else()
+    list(APPEND compile_options     "-fno-lto")
+    list(APPEND link_options        "-fno-lto")
+endif()
+
 if(CONFIG_COMPILER_DISABLE_DEFAULT_ERRORS)
     if(NOT CMAKE_C_COMPILER_ID MATCHES "Clang")
         idf_build_replace_option_from_property(COMPILE_OPTIONS "-Werror" "-Werror=all")
@@ -198,8 +213,6 @@ if(CONFIG_ESP_SYSTEM_USE_EH_FRAME)
   list(APPEND link_options "-Wl,--eh-frame-hdr")
 endif()
 
-list(APPEND link_options "-fno-lto")
-
 if(CONFIG_IDF_TARGET_LINUX AND CMAKE_HOST_SYSTEM_NAME STREQUAL "Darwin")
     # Not all versions of the MacOS linker support the -warn_commons flag.
     # ld version 1053.12 (and above) have been tested to support it.

components/esp_eth/CMakeLists.txt

@@ -34,7 +34,8 @@ if(CONFIG_ETH_ENABLED)
                          "src/phy/esp_eth_phy_ip101.c"
                          "src/phy/esp_eth_phy_ksz80xx.c"
                          "src/phy/esp_eth_phy_lan87xx.c"
-                         "src/phy/esp_eth_phy_rtl8201.c")
+                         "src/phy/esp_eth_phy_rtl8201.c"
+                         "src/phy/esp_eth_phy_jl1101.c")
     endif()
 
     if(CONFIG_ETH_SPI_ETHERNET_DM9051)

components/esp_eth/include/esp_eth_phy.h

@@ -352,6 +352,17 @@ esp_eth_phy_t *esp_eth_phy_new_dp83848(const eth_phy_config_t *config);
 */
 esp_eth_phy_t *esp_eth_phy_new_ksz80xx(const eth_phy_config_t *config);
 
+/**
+* @brief Create a PHY instance of JL1101
+*
+* @param[in] config: configuration of PHY
+*
+* @return
+*      - instance: create PHY instance successfully
+*      - NULL: create PHY instance failed because some error occurred
+*/
+esp_eth_phy_t *esp_eth_phy_new_jl1101(const eth_phy_config_t *config);
+
 #if CONFIG_ETH_SPI_ETHERNET_DM9051
 /**
 * @brief Create a PHY instance of DM9051

components/esp_eth/src/phy/esp_eth_phy_jl1101.c

@@ -0,0 +1,186 @@
+/*
+ * SPDX-FileCopyrightText: 2019-2023 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include <string.h>
+#include <stdlib.h>
+#include <sys/cdefs.h>
+#include "esp_log.h"
+#include "esp_check.h"
+#include "esp_eth_phy_802_3.h"
+
+static const char *TAG = "jl1101";
+
+/***************Vendor Specific Register***************/
+
+/**
+ * @brief PSMR(Power Saving Mode Register)
+ *
+ */
+typedef union {
+    struct {
+        uint16_t reserved : 15;   /* Reserved */
+        uint16_t en_pwr_save : 1; /* Enable power saving mode */
+    };
+    uint16_t val;
+} psmr_reg_t;
+
+/**
+ * @brief PSR(Page Select Register)
+ *
+ */
+typedef union {
+    struct {
+        uint16_t page_select : 8; /* Select register page, default is 0 */
+        uint16_t reserved : 8;    /* Reserved */
+    };
+    uint16_t val;
+} psr_reg_t;
+#define ETH_PHY_PSR_REG_ADDR (0x1F)
+
+typedef struct {
+    phy_802_3_t phy_802_3;
+} phy_jl1101_t;
+
+static esp_err_t jl1101_page_select(phy_jl1101_t *jl1101, uint32_t page)
+{
+    esp_err_t ret = ESP_OK;
+    esp_eth_mediator_t *eth = jl1101->phy_802_3.eth;
+    psr_reg_t psr = {
+        .page_select = page
+    };
+    ESP_GOTO_ON_ERROR(eth->phy_reg_write(eth, jl1101->phy_802_3.addr, ETH_PHY_PSR_REG_ADDR, psr.val), err, TAG, "write PSR failed");
+    return ESP_OK;
+err:
+    return ret;
+}
+
+static esp_err_t jl1101_update_link_duplex_speed(phy_jl1101_t *jl1101)
+{
+    esp_err_t ret = ESP_OK;
+    esp_eth_mediator_t *eth = jl1101->phy_802_3.eth;
+    uint32_t addr = jl1101->phy_802_3.addr;
+    eth_speed_t speed = ETH_SPEED_10M;
+    eth_duplex_t duplex = ETH_DUPLEX_HALF;
+    bmcr_reg_t bmcr;
+    bmsr_reg_t bmsr;
+    uint32_t peer_pause_ability = false;
+    anlpar_reg_t anlpar;
+    ESP_GOTO_ON_ERROR(jl1101_page_select(jl1101, 0), err, TAG, "select page 0 failed");
+    ESP_GOTO_ON_ERROR(eth->phy_reg_read(eth, addr, ETH_PHY_BMSR_REG_ADDR, &(bmsr.val)), err, TAG, "read BMSR failed");
+    ESP_GOTO_ON_ERROR(eth->phy_reg_read(eth, addr, ETH_PHY_ANLPAR_REG_ADDR, &(anlpar.val)), err, TAG, "read ANLPAR failed");
+    eth_link_t link = bmsr.link_status ? ETH_LINK_UP : ETH_LINK_DOWN;
+    /* check if link status changed */
+    if (jl1101->phy_802_3.link_status != link) {
+        /* when link up, read negotiation result */
+        if (link == ETH_LINK_UP) {
+            ESP_GOTO_ON_ERROR(eth->phy_reg_read(eth, addr, ETH_PHY_BMCR_REG_ADDR, &(bmcr.val)), err, TAG, "read BMCR failed");
+            if (bmcr.speed_select) {
+                speed = ETH_SPEED_100M;
+            } else {
+                speed = ETH_SPEED_10M;
+            }
+            if (bmcr.duplex_mode) {
+                duplex = ETH_DUPLEX_FULL;
+            } else {
+                duplex = ETH_DUPLEX_HALF;
+            }
+            ESP_GOTO_ON_ERROR(eth->on_state_changed(eth, ETH_STATE_SPEED, (void *)speed), err, TAG, "change speed failed");
+            ESP_GOTO_ON_ERROR(eth->on_state_changed(eth, ETH_STATE_DUPLEX, (void *)duplex), err, TAG, "change duplex failed");
+            /* if we're in duplex mode, and peer has the flow control ability */
+            if (duplex == ETH_DUPLEX_FULL && anlpar.symmetric_pause) {
+                peer_pause_ability = 1;
+            } else {
+                peer_pause_ability = 0;
+            }
+            ESP_GOTO_ON_ERROR(eth->on_state_changed(eth, ETH_STATE_PAUSE, (void *)peer_pause_ability), err, TAG, "change pause ability failed");
+        }
+        ESP_GOTO_ON_ERROR(eth->on_state_changed(eth, ETH_STATE_LINK, (void *)link), err, TAG, "change link failed");
+        jl1101->phy_802_3.link_status = link;
+    }
+    return ESP_OK;
+err:
+    return ret;
+}
+
+static esp_err_t jl1101_get_link(esp_eth_phy_t *phy)
+{
+    esp_err_t ret = ESP_OK;
+    phy_jl1101_t *jl1101 = __containerof(esp_eth_phy_into_phy_802_3(phy), phy_jl1101_t, phy_802_3);
+    /* Updata information about link, speed, duplex */
+    ESP_GOTO_ON_ERROR(jl1101_update_link_duplex_speed(jl1101), err, TAG, "update link duplex speed failed");
+    return ESP_OK;
+err:
+    return ret;
+}
+
+static esp_err_t jl1101_autonego_ctrl(esp_eth_phy_t *phy, eth_phy_autoneg_cmd_t cmd, bool *autonego_en_stat)
+{
+    esp_err_t ret = ESP_OK;
+    phy_802_3_t *phy_802_3 = esp_eth_phy_into_phy_802_3(phy);
+    esp_eth_mediator_t *eth = phy_802_3->eth;
+    if (cmd == ESP_ETH_PHY_AUTONEGO_EN) {
+        bmcr_reg_t bmcr;
+        ESP_GOTO_ON_ERROR(eth->phy_reg_read(eth, phy_802_3->addr, ETH_PHY_BMCR_REG_ADDR, &(bmcr.val)), err, TAG, "read BMCR failed");
+        ESP_GOTO_ON_FALSE(bmcr.en_loopback == 0, ESP_ERR_INVALID_STATE, err, TAG, "Autonegotiation can't be enabled while in loopback operation");
+    }
+    return esp_eth_phy_802_3_autonego_ctrl(phy_802_3, cmd, autonego_en_stat);
+err:
+    return ret;
+}
+
+static esp_err_t jl1101_loopback(esp_eth_phy_t *phy, bool enable)
+{
+    esp_err_t ret = ESP_OK;
+    phy_802_3_t *phy_802_3 = esp_eth_phy_into_phy_802_3(phy);
+    bool auto_nego_en;
+    ESP_GOTO_ON_ERROR(jl1101_autonego_ctrl(phy, ESP_ETH_PHY_AUTONEGO_G_STAT, &auto_nego_en), err, TAG, "get status of autonegotiation failed");
+    ESP_GOTO_ON_FALSE(!(auto_nego_en && enable), ESP_ERR_INVALID_STATE, err, TAG, "Unable to set loopback while autonegotiation is enabled. Disable it to use loopback");
+    return esp_eth_phy_802_3_loopback(phy_802_3, enable);
+err:
+    return ret;
+}
+
+static esp_err_t jl1101_init(esp_eth_phy_t *phy)
+{
+    esp_err_t ret = ESP_OK;
+    phy_802_3_t *phy_802_3 = esp_eth_phy_into_phy_802_3(phy);
+
+    /* Basic PHY init */
+    ESP_GOTO_ON_ERROR(esp_eth_phy_802_3_basic_phy_init(phy_802_3), err, TAG, "failed to init PHY");
+
+    /* Check PHY ID */
+    uint32_t oui;
+    uint8_t model;
+    ESP_GOTO_ON_ERROR(esp_eth_phy_802_3_read_oui(phy_802_3, &oui), err, TAG, "read OUI failed");
+    ESP_GOTO_ON_ERROR(esp_eth_phy_802_3_read_manufac_info(phy_802_3, &model, NULL), err, TAG, "read manufacturer's info failed");
+    ESP_GOTO_ON_FALSE(oui == 0x24DF10 && model == 0x2, ESP_FAIL, err, TAG, "wrong chip ID");
+
+    return ESP_OK;
+err:
+    return ret;
+}
+
+esp_eth_phy_t *esp_eth_phy_new_jl1101(const eth_phy_config_t *config)
+{
+    esp_eth_phy_t *ret = NULL;
+    phy_jl1101_t *jl1101 = calloc(1, sizeof(phy_jl1101_t));
+    ESP_GOTO_ON_FALSE(jl1101, NULL, err, TAG, "calloc jl1101 failed");
+    ESP_GOTO_ON_FALSE(esp_eth_phy_802_3_obj_config_init(&jl1101->phy_802_3, config) == ESP_OK,
+                        NULL, err, TAG, "configuration initialization of PHY 802.3 failed");
+
+    // redefine functions which need to be customized for sake of jl1101
+    jl1101->phy_802_3.parent.init = jl1101_init;
+    jl1101->phy_802_3.parent.get_link = jl1101_get_link;
+    jl1101->phy_802_3.parent.autonego_ctrl = jl1101_autonego_ctrl;
+    jl1101->phy_802_3.parent.loopback = jl1101_loopback;
+
+    return &jl1101->phy_802_3.parent;
+err:
+    if (jl1101 != NULL) {
+        free(jl1101);
+    }
+    return ret;
+}

install.sh

@@ -26,12 +26,12 @@ done
 TARGETS=$("${ESP_PYTHON}" "${IDF_PATH}/tools/install_util.py" extract targets "$@")
 
 echo "Installing ESP-IDF tools"
-"${ESP_PYTHON}" "${IDF_PATH}/tools/idf_tools.py" install --targets="${TARGETS}"
+"${ESP_PYTHON}" "${IDF_PATH}/tools/idf_tools.py" --non-interactive install --targets="${TARGETS}"
 
 FEATURES=$("${ESP_PYTHON}" "${IDF_PATH}/tools/install_util.py" extract features "$@")
 
 echo "Installing Python environment and packages"
-"${ESP_PYTHON}" "${IDF_PATH}/tools/idf_tools.py" install-python-env --features="${FEATURES}"
+"${ESP_PYTHON}" "${IDF_PATH}/tools/idf_tools.py" --non-interactive install-python-env --features="${FEATURES}"
 
 echo "All done! You can now run:"
 echo ""

package.json

@@ -0,0 +1,25 @@
+{
+  "name": "framework-espidf",
+  "version": "3.50400",
+  "description": "Espressif IoT Development Framework. Tasmota framework for ESP32 chip",
+  "keywords": [
+    "framework",
+    "esp32",
+    "esp32s2",
+    "esp32s3",
+    "esp32c2", 
+    "esp32c3",
+    "esp32c5",
+    "esp32c6",
+    "esp32c61",
+    "esp32h2",
+    "esp32p4",
+    "espressif"
+  ],
+  "homepage": "https://docs.espressif.com/projects/esp-idf/en/latest/esp32/",
+  "license": "Apache-2.0",
+  "repository": {
+    "type": "git",
+    "url": "https://github.com/tasmota/esp-idf"
+  }
+}

tools/cmake/build.cmake

@@ -129,13 +129,13 @@ function(__build_set_default_build_specifications)
     list(APPEND compile_options     "-ffunction-sections"
                                     "-fdata-sections"
                                     # warning-related flags
-                                    "-Wall"
-                                    "-Werror"
+                                    # "-Wall"
+                                    # "-Werror"
                                     "-Wno-error=unused-function"
                                     "-Wno-error=unused-variable"
                                     "-Wno-error=unused-but-set-variable"
                                     "-Wno-error=deprecated-declarations"
-                                    "-Wextra"
+                                    # "-Wextra"
                                     "-Wno-error=extra"
                                     "-Wno-unused-parameter"
                                     "-Wno-sign-compare"

version.txt

@@ -0,0 +1 @@
+5.4.0.240921