Updates of the PI18 Protocol for the Mppsolar LV5048 Hyprid V2 inverter. #128
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
After some training time and a lot of try and error.
C ++ is not mine.
With the update, except for the battery Bulk/Float Voltage, and battery Charge/Discharge Voltage work all important things.
The Selects can be adjusted via the YML. But these values are the one that supports the protocoll. Sensor and Device classes were adjusted so that the values in the home assistant are also suitable.
Webinterface
![grafik](https://private-user-images.githubusercontent.com/26431172/332074900-064f58d3-e053-4d89-88d7-6c685d5d619d.png?jwt=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.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.yuPRvYa2FHbc8fcUBDEyOC1YgNjihIJrujuujI_IEv4)
If someone has an idea of how to do two Select fields with the values for the battery voltage Bulk/Float, that would be great
Or a text field where you then enter "552, 540". Which is then translated into the command "^S015MCHGV552, 540".
For the current mapping solution, 2x 11025 lines would be required to enable all values for it.