Skip to content

Vector graphics based nanolithography tool for Asylum Research AFMs

License

Notifications You must be signed in to change notification settings

ssomnath/smart_litho

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

30 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Smart Litho Art Suite

Suhas Somnath

University of Illinois Urbana-Champaign

Last Updated: 2/13/2011 (v.1.7)

Introduction

The software provided by Asylum Research to control their atomic force microscopes (AFMs) comes with a Microangelo suite for performon nanolithography. While it is capable of simple tasks, it was (as of 2010 - 2014) not capable of vector graphics. This capability is especially important for tip based nanofabrication (TBN) wherein the AFM tip is dragged along the surface to create nanostructures either by creating a trench (scratch lithography) or depositing material onto the surface (dip pen nanolithography (DPN)). For example, the basic Microangelo software could not resize, move, replicate, rotate objects or even draw a set of straight lines of the same length!

These capabilities become very important when researchers want to characterize their lithography technique. For example studying the width of the fabricated lines as a function of pressure or angle, etc. Another situation when these features are important is if one is interested in fabricating complex features such as the eiffel tower or write the name of the university of sponsor, etc.

This Smart Litho suite offers basic vector graphics capabilities that are / were lacking in Microangelo. As an analogy, Smart Litho is like Microsoft Powerpoint or Adobe Illustrator or Inkscape while Microangelo is like Microsoft Paint. The following sections will illustrate this point.

Journal papers using this software

  • Somnath, Suhas, Hoe Joon Kim, Huan Hu, and William P. King. "Parallel nanoimaging and nanolithography using a heated microcantilever array." Nanotechnology 25, no. 1 (2013): 014001.

Disclaimer : Note that this software was written from 2009 - 2011 and it may or may not work now.

Installing

The software consists of two procedure files containing the source code named Alphabets.ipf and SmartLitho.ipf as well as this help file. Currently, the user is required to follow these instructions to use the software each time the Asylum Research software is opened up:

  1. Start up the Asylum Research software.
  2. Double click to open both the procedure files: Alphabets.ipf and SmartLitho.ipf. Two windows showing the code within each file should open up in Igor Pro.
  3. The code needs to be compiled to enable its use. There are two ways to do this:
    1. Click on the Macros menu button next to File, Edit, and Data. Next select Compile.
    2. Another way to do this is to click the "compile" button in the bottom left corner of either of the windows that have popped up.
  4. To start up SmartLitho click on Macros menu button, select UIUC Lithography, and then choose Smart Litho Art Suite

Smart Litho Art Suite

The Smart Litho Arte Suite consists of four main components:

  1. Lines Tab
  2. Text Tab
  3. General Functions
  4. Layers Tab

Lines

This tab lets the user draw multiple parallel lines of arbitrary length, orientation and spacing. The following steps need to be followed to draw a pattern of lines:

  1. Borders for the scan area are first entered in the four input boxes that enable the user to confine the positioning of the pattern. The default border is set to 1 micron from the edges of the scan area.
  2. Basic Line Parameters are then specified with the number of parallel lines, orientation, length and spacing.
  3. Additional constraining parameters can be specified using the Advanced Controls:
    1. Direction: By default, the lines will be drawn with the same vector direction. The two additional options include Switch All that switches the vector direction of all the lines. The last option Switch Alternate allows the user to switch the orientation of every alternate line.
    2. Length: By default, lines extending outside the border will automatically truncated. However, by setting this option to Exact it is possible to force the program to draw lines of the exact specified length in the basic line parameters.
    3. Show Direction Arrows: This is borrowed from the Microangelo suite. On checking this option, the user is shown the direction of the lines being drawn.
  4. The lines are finally drawn by clicking on the Draw New button.

image0

Figure 1. Lines Tab - 7 out of 10 lines that the program attempted to draw. A shows the maximum length of 15 microns. B shows the counter-clockwise angle of 45 degrees of each line. C shows the perpendicular spacing of 4 microns between adjacent lines. D shows the direction of the lines that were drawn. E shows that truncated lines were drawn within the specified boundary.

Text

This tab allows the user to write alphanumeric characters using lines. The rules regarding borders apply to this tab as well. The text is drawn by clicking on the Draw New button.

image1

Figure 2. Text Tab - Text "Smart Litho" written using the software. H, W, and S are the height, width and the spacing between each character.

General Functions

image2

Figure 3. General Functions

Fig. 3 The red box delineates the general functions available:

  1. Draw New - Valid only for the text and lines tabs, on clicking this button, a set of parallel lines or text is drawn freshly on the screen. Any previous graphics is discarded. You can use the Undo button to go back.
  2. Undo - Displays the graphics prior to any change made. Note - this will allow the user to go back only one step.
  3. Append - Valid only for the text and lines tabs, Adds a pattern of lines or text to the existing artwork as a new layer of artwork.
  4. Load New - Loads a saved pattern from memory. This will erase anything else that was drawn. Borrowed from the Microangelo suite
  5. Clear - Deletes all patterns. Borrowed from the Kill All button in the Microangelo suite
  6. Save - Saves all the patterns as a single pattern to memory. Also the same as the Save button in the Microangelo suite. Note - This only saves to memory. In case the Asylum software is restarted, this will most likely be erased from memory. To save the patterns to disk use the Save to Disk button.
  7. Append Saved - Similar to Load New but this doesn't erase the existing patterns. The appended pattern is loaded as a new layer.
  8. Load from Disk - This loads a saved pattern from a * .txt file on disk to memory. Note - the loaded pattern will NOT be displayed on the screen. The Append Saved or the Load New buttons must be used to load the pattern from memory.
  9. Save To Disk - Saves all displayed patterns to a specified *.txt file on the disk.

Layers

image3

Figure 4. Layers Tab

The artwork produced in the Smart Litho suite is stored as a set of layers in memory. The Layers tab shown in Fig. 4 allows the user to perform the following vector based graphics operations on individual layers:

  1. Select Layer - The pull down menu can be used to select the layer of artwork to perform operations on.
  2. Show / Show all - The Asylum Lithography program is only aware of the patterns visible on the scan panel. It is possible to show / hide individual layers for performing Lithography
  3. Select / Select All - Features currently under construction
  4. Delete - This button enables the user to delete the particular layer of artwork. Note - All subsequent layers are moved up in the layers list to fill the void left by the deleted layer.
  5. Move - The selected pattern may be moved within the specified boundary using the Right (um) and the Up (um) parameters.
  6. Rotate - The rotate button can be used to rotate the selected pattern using the Rotate ccw (deg) box to specify the counter-clockwise rotation in degrees. Note - Currently, this feature causes the rotated feature to be repositioned at the top left of the boundary. Appropriate boundaries should be specified to make it easy to perform this operation.
  7. Scale - This allows the pattern to be scaled according to the specified parameter. Note - Similar to the rotate operation, the scaled pattern will be repositioned according to the border settings to the top left of the bounded area.
  8. Flip - The specified layer can be mirrored vertically or horizontally depending on the enabled checkboxes after clicking the Flip button.