Skip to content
You must be logged in to sponsor MattMills

Become a sponsor to Matt Mills

Hello potential supporters!

I work on a few of my own open source code projects like these:

  • RadioCapture - A software defined radio based bulk collection system that captures trunked radio systems
  • stellarStellaris - A in memory patching system to patch and tweak various functions and code in Stellaris to improve performance and test performance issues.
  • tinyusb_multitool - A raspberry pi pico library that configures TinyUSB to provide a runtime USB mass storage device that can be used for flashing RP2040 or ESP32 firmware, as well as virtual serial ports for each UART and STDIO.
  • kxtj3 - A pico SDK based library for KXTJ3-1057 Accelerometers.
  • led-mcu-rp2040/esp32 - MCU firmware for my 16x16 RGB LED Matrix for an RP2040 and ESP32 chipset (which work cooperatively), The open source hardware will be released soon!
  • pico-spi-utilies - Simple utilities for reading/writing/erasing a secondary SPI flash from a RP2040.
  • unrested - A simple PHP REST API interface.

I also have contributed to:

  • Gnuradio
  • op25
  • Apache Traffic Control
  • Apache Traffic Server

Your sponsorship will support me in my open source work as well as open data access projects like RadioCapture.

@MattMills

This goal would significantly offset my monthly cost of living, allowing me to spend a lot more time dedicated to open source projects!

Featured work

  1. MattMills/radiocapture-rf

    RF side of Radiocapture's SDR based trunked radio bulk collection system

    Python 66
  2. MattMills/stellarstellaris

    C app that injects artisanal performance improvement changes into Stellaris

  3. 2bn-dev/led-mcu-rp2040

    16x16 LED Matrix module - MCU RP2040 firmware

    C 3
  4. 2bn-dev/kxtj3

    C library that implements the KXTJ3-1057 Accelerometer interfaces per the datasheet

    C 1
  5. 2bn-dev/tinyusb_multitool

    C library that tries to provide a simpler but extensible interface for USB mass storage (msc) and USB Serial ports (cdc) via TinyUSB

    C 7

0% towards $1,500 per month goal

Be the first to sponsor this goal!

$10 a month

Become a patron

$25 a month

Become a patron

$75 a month

Become a patron

$100 a month

Become a patron

$500 a month

Become a patron

$10,000 a month

Become a patron

You'll be redirected to Patreon to complete your transaction.

Connect your Patreon in settings.