Kinetis K02 64 KB/128 KB Flash 100 MHz ARM® Cortex®-M4 Based Microcontroller with FPU Ideal for low-power applications that require processing efficiency and high peripheral integration. These devices share the comprehensive enablement and scalability of the Kinetis family. This product offers: • Run power consumption down to 117.5 µA/MHz and static power consumption down to 2.8 µA with full state retention and 5.7 µs wakeup. Lowest static mode down to 70 nA. • Excellent processing efficiency, 100 MHz ARM® Cortex®- M4-based device with floating-point unit in a tiny form factor We will be adding a URL to the new Additional Boards Manager URLs option. The list of URLs is comma separated, and you will only have to add each URL once. New Adafruit boards and updates to existing boards will automatically be picked up by the Board Manager each time it is opened. The URLs point to index files that the Board Manager uses to build the list of available & installed boards.
To find the most up to date list of URLs you can add, you can visit the list of third party board URLs on the Arduino IDE wiki. We will only need to add one URL to the IDE in this example, but you can add multiple URLS by separating them with commas. Copy and paste the link below into the Additional Boards Manager URLs option in the Arduino IDE preferences.
Performance • 100 MHz ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz
Memories and memory interfaces • Up to 128 KB of embedded flash and 16 KB of RAM • Preprogrammed Kinetis flashloader for one-time, insystem factory programming
System peripherals • Flexible low-power modes, multiple wake up sources • 4-channel DMA controller • Independent External and Software Watchdog monitor
Clocks • Crystal oscillator: 32-40 kHz or 3-32 MHz • Three internal oscillators: 32 kHz, 4 MHz, and 48 MHz • Multi-purpose clock generator with FLL
Security and integrity modules • Hardware CRC module • 128-bit unique identification (ID) number per chip • Flash access control to protect proprietary software
Human-machine interface • Up to 46 general-purpose I/O (GPIO)
Analog modules • One 16-bit SAR ADC (1.2 MS/s in 12bit mode) • One 12-bit DAC • Two analog comparators (CMP) with 6- bit DAC • Accurate internal voltage reference (not available in
32-pin QFN package) Communication interfaces • One SPI module • Two UART modules • One I2C: Support for up to 1 Mbps operation
Timers • One 6-channel general-purpose/PWM timer • Two 2-channel general-purpose timers with quadrature decoder functionality (FTM2 does not have external pins on the 32-pin QFN or the 48-pinLQFP package) • Periodic interrupt timers • 16-bit low-power timer • Programmable delay block
Operating Characteristics • Voltage range (including flash writes): 1.71 to 3.6 V • Temperature range (ambient): -40 to 105°C