NOTE: there is many vendor names so I chose Ongy arbitraily to avoid "noname" vendor name.
The motherboard can be easily found on the web (many resaler arround 40€ brand new) see here:
The port has been made using autoport sript. It is not a rebranded GA-H61M-S1 even if the two motherboard are very similar.
- The folder INFOS containe some outputs of the motherboard
- The folder ROM_AND_DOC contain original ROM and official documentation
- Coreboot.config file contiane .config file used to compile the rom
- Noname folder contain the folder to put in src/mainboard dir
- By default, all the original bios is readable and writable everythings can be done with
flashrom -p internalcommand
- Restart, S3 resume and shutdown works
- Network works (not tested for PXE boot, just with loaded OS)
- USB boot works (USB 2.0 only - USB 3.0 works sometimes but not always, don't why yet - Works when OS is loaded)
- SATA works (all ports)
- integrated Sound works
- Integrated VGA and HDMI works
- PCIe 16x port (with HD5450 - VGA only)
- Seabios payload works fine
- Tianocore doesn't works (don't know why yet)
- code submeted to coreboot review - Appril 28 2020
- I asked to all vendors where I can find the official documentation of this board (if exist)
- you can discuss about this board on Reddit Coreboot page
- i5 2500k, 8GB RAM GSKILL DDR3 1333Mhz, Kingspec 180G SSD
- Boot Ubuntu live throught USB 2.0 (USB 3.0 is actually buggy but works fine when OS is loaded)
- Boot Windows 10 and Ubuntu 18.04 LTS via sata port 1 to 4 (AHCI mode)
