[Security] Bump urllib3 from 1.22 to 1.26.5 in /fact-bounty-flask

[dependabot-preview]

Bumps urllib3 from 1.22 to 1.26.5. This update includes security fixes.

Vulnerabilities fixed

Sourced from The GitHub Security Advisory Database.

Catastrophic backtracking in URL authority parser when passed URL containing many @ characters

Impact

When provided with a URL containing many @ characters in the authority component the authority regular expression exhibits catastrophic backtracking causing a denial of service if a URL were passed as a parameter or redirected to via an HTTP redirect.

Patches

The issue has been fixed in urllib3 v1.26.5.

References

• CVE-2021-33503
• urllib3 v1.26.5

For more information

If you have any questions or comments about this advisory:

• Ask in our community Discord
• Email [email protected]

Affected versions: < 1.26.5

Sourced from The GitHub Security Advisory Database.

CRLF injection urllib3 before 1.25.9 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of putrequest(). NOTE: this is similar to CVE-2020-26116.

Affected versions: < 1.25.9

Sourced from The GitHub Security Advisory Database.

High severity vulnerability that affects urllib3 The urllib3 library before 1.24.2 for Python mishandles certain cases where the desired set of CA certificates is different from the OS store of CA certificates, which results in SSL connections succeeding in situations where a verification failure is the correct outcome. This is related to use of the ssl_context, ca_certs, or ca_certs_dir argument.

Affected versions: < 1.24.2

Sourced from The GitHub Security Advisory Database.

High severity vulnerability that affects urllib3 urllib3 before version 1.23 does not remove the Authorization HTTP header when following a cross-origin redirect (i.e., a redirect that differs in host, port, or scheme). This can allow for credentials in the Authorization header to be exposed to unintended hosts or transmitted in cleartext.

Affected versions: < 1.23

Release notes

Sourced from urllib3's releases.

1.26.5

⚠️ IMPORTANT: urllib3 v2.0 will drop support for Python 2: Read more in the v2.0 Roadmap

• Fixed deprecation warnings emitted in Python 3.10.
• Updated vendored six library to 1.16.0.
• Improved performance of URL parser when splitting the authority component.

If you or your organization rely on urllib3 consider supporting us via GitHub Sponsors

1.26.4

⚠️ IMPORTANT: urllib3 v2.0 will drop support for Python 2: Read more in the v2.0 Roadmap

• Changed behavior of the default SSLContext when connecting to HTTPS proxy during HTTPS requests. The default SSLContext now sets check_hostname=True.

If you or your organization rely on urllib3 consider supporting us via GitHub Sponsors

1.26.3

⚠️ IMPORTANT: urllib3 v2.0 will drop support for Python 2: Read more in the v2.0 Roadmap

• Fixed bytes and string comparison issue with headers (Pull #2141)

• Changed ProxySchemeUnknown error message to be more actionable if the user supplies a proxy URL without a scheme (Pull #2107)

If you or your organization rely on urllib3 consider supporting us via GitHub Sponsors

1.26.2

⚠️ IMPORTANT: urllib3 v2.0 will drop support for Python 2: Read more in the v2.0 Roadmap

• Fixed an issue where wrap_socket and CERT_REQUIRED wouldn't be imported properly on Python 2.7.8 and earlier (Pull #2052)

1.26.1

⚠️ IMPORTANT: urllib3 v2.0 will drop support for Python 2: Read more in the v2.0 Roadmap

• Fixed an issue where two User-Agent headers would be sent if a User-Agent header key is passed as bytes (Pull #2047)

1.26.0

⚠️ IMPORTANT: urllib3 v2.0 will drop support for Python 2: Read more in the v2.0 Roadmap

• Added support for HTTPS proxies contacting HTTPS servers (Pull #1923, Pull #1806)

• Deprecated negotiating TLSv1 and TLSv1.1 by default. Users that still wish to use TLS earlier than 1.2 without a deprecation warning should opt-in explicitly by setting ssl_version=ssl.PROTOCOL_TLSv1_1 (Pull #2002) Starting in urllib3 v2.0: Connections that receive a DeprecationWarning will fail

• Deprecated Retry options Retry.DEFAULT_METHOD_WHITELIST, Retry.DEFAULT_REDIRECT_HEADERS_BLACKLIST and Retry(method_whitelist=...) in favor of Retry.DEFAULT_ALLOWED_METHODS, Retry.DEFAULT_REMOVE_HEADERS_ON_REDIRECT, and Retry(allowed_methods=...) (Pull #2000) Starting in urllib3 v2.0: Deprecated options will be removed

... (truncated)

Changelog

Sourced from urllib3's changelog.

1.26.5 (2021-05-26)

• Fixed deprecation warnings emitted in Python 3.10.
• Updated vendored six library to 1.16.0.
• Improved performance of URL parser when splitting the authority component.

1.26.4 (2021-03-15)

• Changed behavior of the default SSLContext when connecting to HTTPS proxy during HTTPS requests. The default SSLContext now sets check_hostname=True.

1.26.3 (2021-01-26)

• Fixed bytes and string comparison issue with headers (Pull #2141)
• Changed ProxySchemeUnknown error message to be more actionable if the user supplies a proxy URL without a scheme. (Pull #2107)

1.26.2 (2020-11-12)

• Fixed an issue where wrap_socket and CERT_REQUIRED wouldn't be imported properly on Python 2.7.8 and earlier (Pull #2052)

1.26.1 (2020-11-11)

• Fixed an issue where two User-Agent headers would be sent if a User-Agent header key is passed as bytes (Pull #2047)

1.26.0 (2020-11-10)

• NOTE: urllib3 v2.0 will drop support for Python 2. Read more in the v2.0 Roadmap.
• Added support for HTTPS proxies contacting HTTPS servers (Pull #1923, Pull #1806)
• Deprecated negotiating TLSv1 and TLSv1.1 by default. Users that still wish to use TLS earlier than 1.2 without a deprecation warning should opt-in explicitly by setting ssl_version=ssl.PROTOCOL_TLSv1_1 (Pull #2002) Starting in urllib3 v2.0: Connections that receive a DeprecationWarning will fail
• Deprecated Retry options Retry.DEFAULT_METHOD_WHITELIST, Retry.DEFAULT_REDIRECT_HEADERS_BLACKLIST and Retry(method_whitelist=...) in favor of Retry.DEFAULT_ALLOWED_METHODS, Retry.DEFAULT_REMOVE_HEADERS_ON_REDIRECT, and Retry(allowed_methods=...) (Pull #2000) Starting in urllib3 v2.0: Deprecated options will be removed
• Added default User-Agent header to every request (Pull #1750)
• Added urllib3.util.SKIP_HEADER for skipping User-Agent, Accept-Encoding, and Host headers from being automatically emitted with requests (Pull #2018)
• Collapse transfer-encoding: chunked request data and framing into the same socket.send() call (Pull #1906)
• Send http/1.1 ALPN identifier with every TLS handshake by default (Pull #1894)
• Properly terminate SecureTransport connections when CA verification fails (Pull #1977)
• Don't emit an SNIMissingWarning when passing server_hostname=None to SecureTransport (Pull #1903)
• Disabled requesting TLSv1.2 session tickets as they weren't being used by urllib3 (Pull #1970)
• Suppress BrokenPipeError when writing request body after the server has closed the socket (Pull #1524)
• Wrap ssl.SSLError that can be raised from reading a socket (e.g. "bad MAC") into an urllib3.exceptions.SSLError (Pull #1939)

1.25.11 (2020-10-19)

• Fix retry backoff time parsed from Retry-After header when given in the HTTP date format. The HTTP date was parsed as the local timezone rather than accounting for the timezone in the HTTP date (typically UTC) (Pull #1932, Pull #1935, Pull #1938, Pull #1949)
• Fix issue where an error would be raised when the SSLKEYLOGFILE environment variable was set to the empty string. Now SSLContext.keylog_file is not set in this situation (Pull #2016)

... (truncated)

Commits

• d161647 Release 1.26.5
• 2d4a3fe Improve performance of sub-authority splitting in URL
• 2698537 Update vendored six to 1.16.0
• 07bed79 Fix deprecation warnings for Python 3.10 ssl module
• d725a9b Add Python 3.10 to GitHub Actions
• 339ad34 Use pytest==6.2.4 on Python 3.10+
• f271c9c Apply latest Black formatting
• 1884878 [1.26] Properly proxy EOF on the SSLTransport test suite
• a891304 Release 1.26.4
• 8d65ea1 Merge pull request from GHSA-5phf-pp7p-vc2r
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
• @dependabot badge me will comment on this PR with code to add a "Dependabot enabled" badge to your readme

Additionally, you can set the following in the .dependabot/config.yml file in this repo:

• Update frequency
• Automerge options (never/patch/minor, and dev/runtime dependencies)
• Out-of-range updates (receive only lockfile updates, if desired)
• Security updates (receive only security updates, if desired)