Add support for dmaker.fan.p45

README.md

@@ -267,7 +267,7 @@ integration, this library supports also the following devices:
 * Xiaomi Philips Zhirui Bedroom Smart Lamp
 * Huayi Huizuo Lamps
 * Xiaomi Universal IR Remote Controller (Chuangmi IR)
-* Xiaomi Mi Smart Pedestal Fan V2, V3, SA1, ZA1, ZA3, ZA4, ZA5 1C, P5, P9, P10, P11, P15, P18, P33
+* Xiaomi Mi Smart Pedestal Fan V2, V3, SA1, ZA1, ZA3, ZA4, ZA5 1C, P5, P9, P10, P11, P15, P18, P33, P45
 * Xiaomi Rosou SS4 Ventilator (leshow.fan.ss4)
 * Xiaomi Mi Air Humidifier V1, CA1, CA4, CB1, MJJSQ, JSQ, JSQ1, JSQ001
 * Xiaomi Mi Water Purifier (Basic support: Turn on & off)

miio/integrations/dmaker/fan/fan_miot.py

@@ -10,6 +10,7 @@
 class OperationMode(enum.Enum):
     Normal = "normal"
     Nature = "nature"
+    Sleep = "sleep"
 
 
 class MoveDirection(enum.Enum):
@@ -23,6 +24,7 @@
 MODEL_FAN_P15 = "dmaker.fan.p15"
 MODEL_FAN_P18 = "dmaker.fan.p18"
 MODEL_FAN_P33 = "dmaker.fan.p33"
+MODEL_FAN_P45 = "dmaker.fan.p45"
 MODEL_FAN_1C = "dmaker.fan.1c"
 
 
@@ -85,6 +87,19 @@
         "power_off_time": {"siid": 3, "piid": 1},
         "set_move": {"siid": 6, "piid": 1},
     },
+    MODEL_FAN_P45: {
+        # Source https://miot-spec.org/miot-spec-v2/instance?type=urn:miot-spec-v2:device:fan:0000A005:dmaker-p45:1
+        "power": {"siid": 2, "piid": 1},
+        "fan_level": {"siid": 2, "piid": 2},
+        "mode": {"siid": 2, "piid": 3},
+        "swing_mode": {"siid": 2, "piid": 4},
+        "swing_mode_angle": {"siid": 2, "piid": 5},
+        "power_off_time": {"siid": 3, "piid": 1},
+        "light": {"siid": 4, "piid": 1},
+        "buzzer": {"siid": 5, "piid": 1},
+        "child_lock": {"siid": 7, "piid": 1},
+        "fan_speed": {"siid": 8, "piid": 1},
+    },
 }
 
 
@@ -114,6 +129,7 @@
     MODEL_FAN_P15: [30, 60, 90, 120, 140],  # mapped to P11
     MODEL_FAN_P18: [30, 60, 90, 120, 140],  # mapped to P10
     MODEL_FAN_P33: [30, 60, 90, 120, 140],
+    MODEL_FAN_P45: [30, 60, 90, 120, 150],
 }
 
 
@@ -122,10 +138,16 @@
     Nature = 1
 
 
+class OperationModeMiotP45(enum.Enum):
+    Normal = 0
+    Nature = 1
+    Sleep = 2
+
+
 class FanStatusMiot(DeviceStatus):
     """Container for status reports for Xiaomi Mi Smart Pedestal Fan DMaker P9/P10."""
 
-    def __init__(self, data: Dict[str, Any]) -> None:
+    def __init__(self, data: Dict[str, Any], model: str) -> None:
         """
         Response of a FanMiot (dmaker.fan.p10):
 
@@ -148,6 +170,7 @@
         }
         """
         self.data = data
+        self.model = model
 
     @property
     def power(self) -> str:
@@ -162,6 +185,8 @@
     @property
     def mode(self) -> OperationMode:
         """Operation mode."""
+        if self.model == MODEL_FAN_P45:
+            return OperationMode[OperationModeMiotP45(self.data["mode"]).name]
         return OperationMode[OperationModeMiot(self.data["mode"]).name]
 
     @property
@@ -292,7 +317,8 @@
             {
                 prop["did"]: prop["value"] if prop["code"] == 0 else None
                 for prop in self.get_properties_for_mapping()
-            }
+            },
+            self.model,
         )
 
     @command(default_output=format_output("Powering on"))
@@ -311,6 +337,9 @@
     )
     def set_mode(self, mode: OperationMode):
         """Set mode."""
+        if self.model == MODEL_FAN_P45:
+            return self.set_property("mode", OperationModeMiotP45[mode.name].value)
+
         return self.set_property("mode", OperationModeMiot[mode.name].value)
 
     @command(