Added waveshare-rp2040-lcd-1-69

.gitignore

@@ -4,3 +4,4 @@ Cargo.lock
 .vscode
 *.orig
 *.raw
+.DS_Store

Cargo.toml

@@ -27,6 +27,7 @@ members = [
     "boards/waveshare-rp2040-zero",
     "boards/waveshare-rp2040-lcd-0-96",
 	"boards/waveshare-rp2040-lcd-1-28",
+    "boards/waveshare-rp2040-lcd-1-69",
 ]
 
 [workspace.dependencies]
@@ -64,3 +65,4 @@ usbd-hid = "0.7.0"
 usbd-serial = "0.2.1"
 ws2812-pio = "0.8.0"
 gc9a01a_driver = "0.1.3"
+st7789v2_driver = "0.1.0"

README.md

@@ -367,6 +367,29 @@ RP2040 chip according to how it is connected up on the board.
 [Waveshare RP2040 LCD 0.96"]: https://www.waveshare.com/wiki/RP2040-LCD-0.96
 [waveshare-rp2040-lcd-0_96]: https://github.com/rp-rs/rp-hal-boards/tree/main/boards/waveshare-rp2040-lcd-0-96
 
+### [waveshare-rp2040-lcd-1-28] - Board Support for the [Waveshare RP2040 LCD 1.28"]
+
+You should include this crate if you are writing code that you want to run on
+an [Waveshare RP2040 LCD 1.28"] - a very small RP2040 breakout board with USB-C,
+a 65K IPS LCD 160x80, 16MBit Flash and 1A battery charger from Waveshare.
+
+This crate includes the [rp2040-hal], but also configures each pin of the
+RP2040 chip according to how it is connected up on the board.
+
+[Waveshare RP2040 LCD 1.28"]: https://www.waveshare.com/wiki/RP2040-LCD-1.28
+[waveshare-rp2040-lcd-1-28]: https://github.com/rp-rs/rp-hal-boards/tree/main/boards/waveshare-rp2040-lcd-1-28
+
+### [waveshare-rp2040-lcd-1-69] - Board Support for the [Waveshare RP2040 LCD 1.69"]
+
+You should include this crate if you are writing code that you want to run on
+an [Waveshare RP2040 LCD 1.69"] - a very small RP2040 breakout board with USB-C,
+a 65K IPS LCD 160x80, 16MBit Flash and 1A battery charger from Waveshare.
+
+This crate includes the [rp2040-hal], but also configures each pin of the
+RP2040 chip according to how it is connected up on the board.
+
+[Waveshare RP2040 LCD 1.69"]: https://www.waveshare.com/wiki/RP2040-Touch-LCD-1.69
+[waveshare-rp2040-lcd-1-69]: https://github.com/rp-rs/rp-hal-boards/tree/main/boards/waveshare-rp2040-lcd-1-69
 <!-- PROGRAMMING -->
 ## Programming
 

boards/waveshare-rp2040-lcd-1-69/CHANGELOG.md

@@ -0,0 +1,17 @@
+# Changelog
+
+All notable changes to this project will be documented in this file.
+
+The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
+and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
+
+## Unreleased
+
+## 0.1.0 - 2024-09-24
+
+### Changed
+
+- Inital release
+- Copied from waveshare-rp2040-lcd-1.28
+- Update board name
+

boards/waveshare-rp2040-lcd-1-69/Cargo.toml

@@ -0,0 +1,51 @@
+[package]
+name = "waveshare-rp2040-lcd-1-69"
+version = "0.1.0"
+authors = ["René van Dorst <[email protected]>", "Andrea Nall <[email protected]>", "TilCreator <[email protected]>", "The rp-rs Developers", "GordonCox"]
+edition = "2018"
+homepage = "https://github.com/rp-rs/rp-hal-boards/tree/main/boards/waveshare-rp2040-lcd-1-69"
+description = "Board Support Package for the Waveshare RP2040 LCD 1.69 inch"
+license = "MIT OR Apache-2.0"
+repository = "https://github.com/rp-rs/rp-hal-boards.git"
+
+# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
+
+[dependencies]
+cortex-m-rt = { workspace = true, optional = true }
+rp2040-boot2 = { workspace = true, optional = true }
+rp2040-hal.workspace = true
+
+[dev-dependencies]
+cortex-m.workspace = true
+panic-halt.workspace = true
+embedded-hal.workspace = true
+fugit.workspace = true
+nb.workspace = true
+embedded-graphics.workspace = true
+st7789v2_driver = { workspace = true }
+
+[features]
+# This is the set of features we enable by default
+default = ["boot2", "rt", "critical-section-impl", "rom-func-cache"]
+
+# critical section that is safe for multicore use
+critical-section-impl = ["rp2040-hal/critical-section-impl"]
+
+# 2nd stage bootloaders for rp2040
+boot2 = ["rp2040-boot2"]
+
+# Minimal startup / runtime for Cortex-M microcontrollers
+rt = ["cortex-m-rt","rp2040-hal/rt"]
+
+# This enables a fix for USB errata 5: USB device fails to exit RESET state on busy USB bus.
+# Only required for RP2040 B0 and RP2040 B1, but it doesn't hurt to enable it
+rp2040-e5 = ["rp2040-hal/rp2040-e5"]
+
+# Memoize(cache) ROM function pointers on first use to improve performance
+rom-func-cache = ["rp2040-hal/rom-func-cache"]
+
+# Disable automatic mapping of language features (like floating point math) to ROM functions
+disable-intrinsics = ["rp2040-hal/disable-intrinsics"]
+
+# This enables ROM functions for f64 math that were not present in the earliest RP2040s
+rom-v2-intrinsics = ["rp2040-hal/rom-v2-intrinsics"]

boards/waveshare-rp2040-lcd-1-69/README.md

@@ -0,0 +1,97 @@
+# [waveshare-rp2040-lcd-1-69] - Board Support for the [Waveshare RP2040 LCD 1.69]
+
+You should include this crate if you are writing code that you want to run on
+an [Waveshare RP2040 LCD 1.69] - a very small RP2040 breakout board with USB-C, 
+a 65K IPS LCD 240x240, 16MBit Flash and 1A battery charger from Waveshare.
+
+This crate includes the [rp2040-hal], but also configures each pin of the
+RP2040 chip according to how it is connected up on the Feather.
+
+[Waveshare RP2040 LCD 1.69]: https://www.waveshare.com/wiki/RP2040-Touch-LCD-1.69
+[waveshare-rp2040-lcd-1-69]: https://github.com/rp-rs/rp-hal-boards/tree/main/boards/waveshare-rp2040-lcd-1-69
+[rp2040-hal]: https://github.com/rp-rs/rp-hal/tree/main/rp2040-hal
+[Raspberry Silicon RP2040]: https://www.raspberrypi.org/products/rp2040/
+
+## Using
+
+To use this crate, your `Cargo.toml` file should contain:
+
+```toml
+waveshare_rp2040_lcd_1_69 = "0.1.0"
+```
+
+In your program, you will need to call `waveshare_rp2040_lcd_1_69::Pins::new` to create
+a new `Pins` structure. This will set up all the GPIOs for any on-board
+devices. See the [examples](./examples) folder for more details.
+
+## Examples
+
+### General Instructions
+
+To compile an example, clone the _rp-hal-boards_ repository and run:
+
+```console
+rp-hal-boards/boards/waveshare-rp2040-lcd-1-69 $ cargo build --release --example <name>
+```
+
+You will get an ELF file called
+`./target/thumbv6m-none-eabi/release/examples/<name>`, where the `target`
+folder is located at the top of the _rp-hal-boards_ repository checkout. Normally
+you would also need to specify `--target=thumbv6m-none-eabi` but when
+building examples from this git repository, that is set as the default.
+
+If you want to convert the ELF file to a UF2 and automatically copy it to the
+USB drive exported by the RP2040 bootloader, simply boot your board into
+bootloader mode and run:
+
+```console
+rp-hal-boards/boards/waveshare-rp2040-lcd-1-69 $ cargo run --release --example <name>
+```
+
+If you get an error about not being able to find `elf2uf2-rs`, try:
+
+```console
+$ cargo install elf2uf2-rs, then repeating the `cargo run` command above.
+```
+
+### [waveshare_rp2040_lcd_demo_1_69](./examples/waveshare_rp2040_lcd_demo_1_69.rs)
+
+Draws a red and green line with a blue regtangle.
+After that is fills the screen line for line, that end it starts over with an
+other colour, RED, GREEN and BLUE.
+
+## Contributing
+
+Contributions are what make the open source community such an amazing place to
+be, learn, inspire, and create. Any contributions you make are **greatly
+appreciated**.
+
+The steps are:
+
+1. Fork the Project by clicking the 'Fork' button at the top of the page.
+2. Create your Feature Branch (`git checkout -b feature/AmazingFeature`)
+3. Make some changes to the code or documentation.
+4. Commit your Changes (`git commit -m 'Add some AmazingFeature'`)
+5. Push to the Feature Branch (`git push origin feature/AmazingFeature`)
+6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal-boards/pulls)
+7. An admin will review the Pull Request and discuss any changes that may be required.
+8. Once everyone is happy, the Pull Request can be merged by an admin, and your work is part of our project!
+
+## Code of Conduct
+
+Contribution to this crate is organized under the terms of the [Rust Code of
+Conduct][CoC], and the maintainer of this crate, the [rp-rs team], promises
+to intervene to uphold that code of conduct.
+
+[CoC]: CODE_OF_CONDUCT.md
+[rp-rs team]: https://github.com/orgs/rp-rs/teams/rp-rs
+
+## License
+
+The contents of this repository are dual-licensed under the _MIT OR Apache
+2.0_ License. That means you can choose either the MIT license or the
+Apache-2.0 license when you re-use this code. See `MIT` or `APACHE2.0` for more
+information on each specific license.
+
+Any submissions to this project (e.g. as Pull Requests) must be made available
+under these terms.