[Backport wrynose] linux-qcom-6.18 : update to tag qcom-6.18.y-20260626 v6.18.30#2646
Merged
Conversation
Move to the latest linux-qcom-6.18 release tag qcom-6.18.y-20260626 Changelog: FROMLIST: ASoC: qcom: q6apm-dai: fallback to BUFFER_BYTES_MAX without reserved memory FROMLIST: ASoC: qcom: q6apm-dai: fix carveout buffer sizing and SCM assignment QCLINUX: prune.config: Enable the TI DP83867 PHY driver PENDING: arm64: dts: qcom: shikra-cqs-evk: Enable display PENDING: arm64: defconfig: Enable ILI7807S DSI panel driver PENDING: arm64: dts: qcom: shikra-cqm-evk: Enable display and add ili7807s panel PENDING: arm64: dts: qcom: shikra: Add MDSS display subsystem FROMGIT: arm64: defconfig: Enable configs for Arduino VENTUNO Q FROMLIST: arm64: defconfig: Enable Qualcomm PM4125 audio codec as module FROMLIST: arm64: dts: qcom: shikra: fix interrupt specifier cell count FROMGIT: dt-bindings: display/msm: qcm2290-mdss: Fix missing ranges in example BACKPORT: arm64: dts: qcom: agatti: Fix IOMMU DT properties FROMGIT: dt-bindings: media: venus: Fix iommus property FROMGIT: dt-bindings: display: msm: qcm2290-mdss: Fix iommus property Revert "Add Shikra (QCM2390) display support for CQS and CQM targets (#679)" PENDING: iommu: arm-smmu: Add ACTLR settings for missing MDSS devices for new Shikra platform PENDING: soc: qcom: pd-mapper: Add shikra PD support for CQM/CQS/IQS FROMLIST: arm64: dts: qcom: qcm6490-idp: add and enable IPA node PENDING: arm64: dts: qcom: shikra-cqs-evk: Enable display PENDING: arm64: defconfig: Enable ILI7807S DSI panel driver PENDING: arm64: dts: qcom: shikra-cqm-evk: Enable display and add ili7807s panel PENDING: arm64: dts: qcom: shikra: Add MDSS display subsystem PENDING: soc: qcom: llcc: Skip ECC interrupt setup on Shikra, pre-configured by DSF PENDING: arm64: dts: qcom: shikra: Add gpio-reserved-ranges to tlmm FROMLIST: soc: qcom: llcc: Add configuration data for Shikra SoC FROMLIST: ASoC: qcom: q6apm-dai: add carveout SCM assignment for mDSP buffers FROMLIST: arm64: dts: qcom: shikra: Add MDSP carveout memory and update APM DAIs memory regions FROMLIST: dt-bindings: sound: qcom,q6apm-dai: add memory-region property FROMLIST: ASoC: qcom: qdsp6: generalize GPR service domain FROMLIST: ASoC: qcom: q6apm-dai: add VMID-based SCM assignment FROMGIT: ASoC: qcom: q6apm: Add support for early buffer mapping on DSP PENDING: arm64: dts: qcom: shikra: Add Adreno SMMU node PENDING: arm64: dts: qcom: shikra: Add GPU cooling PENDING: arm64: dts: qcom: shikra: Add A704 GPU support FROMLIST: arm64: defconfig: Enable Qualcomm QAIF and WSA885X-I2C drivers FROMLIST: arm64: dts: qcom: shikra-iqs-evk: Enable sound card support FROMLIST: arm64: dts: qcom: shikra-cqs-evk: Enable sound card support FROMLIST: arm64: dts: qcom: shikra-cqm-evk: Enable sound card support FROMLIST: arm64: dts: qcom: shikra: Add soundwire and macro nodes FROMLIST: arm64: dts: qcom: shikra: Add gpr node FROMLIST: arm64: dts: qcom: shikra: Add QAIF CPU node for audio FROMLIST: dt-bindings: sound: qcom,q6apm-dai: add optional qcom,vmid FROMLIST: ASoC: dt-bindings: qcom,apr: Add modem_apps GLINK channel for shikra PENDING: arm64: dts: qcom: shikra-iqs-evk: Add TC9563 PCIe switch node for PCIe PENDING: arm64: dts: qcom: shikra-cqs-evk: Add TC9563 PCIe switch node for PCIe PENDING: arm64: dts: qcom: shikra-cqm-evk: Add TC9563 PCIe switch node for PCIe PENDING: arm64: dts: qcom: shikra: Add PCIe PHY and controller nodes PENDING: PCI/pwrctrl: tc9563: Add API to control endpoint power and reset PENDING: PCI: qcom: Add support for Shikra PCIe controller PENDING: phy: qcom: qmp-pcie: Add QMP PCIe PHY support for Shikra PENDING: dt-bindings: PCI: Add bindings for endpoint gpios PENDING: dt-bindings: PCI: qcom: Document the Shikra PCIe Controller PENDING: dt-bindings: phy: sc8280xp-qmp-pcie: Document Shikra PCIe phy FROMLIST: ASoC: qcom: sc8280xp: add Shikra EVK machine variants FROMLIST: ASoC: dt-bindings: qcom,sm8250: add Shikra sound card compatibles FROMLIST: ASoC: qcom: sc8280xp: add TDM hw_params support FROMLIST: ASoC: qcom: common: add DAI-node TDM slot helpers FROMLIST: ASoC: qcom: q6prm: add Audio IF clock IDs FROMLIST: dt-bindings: sound: qcom,q6dsp-lpass-ports: add Audio IF clocks FROMLIST: ASoC: qcom: q6apm-lpass-dais: add TDM DAI operations FROMLIST: ASoC: qcom: qdsp6: add topology-driven Audio IF support FROMLIST: ASoC: qcom: sc8280xp: ASoC: qcom: sc8280xp: enhance machine driver for board-specific config FROMLIST: ASoC: qcom: q6apm-lpass-dais: Add MI2S clock control FROMLIST: ASoC: dt-bindings: qcom,q6apm-lpass-dais: Document DAI subnode PENDING: arm64: dts: qcom: shikra: add reboot-mode support FROMLIST: soundwire: qcom: add EE-aware register layout and cpu selection FROMLIST: dt-bindings: soundwire: qcom: add qcom,swr-master-ee-val property FROMGIT: soundwire: qcom: adding support for v3.1.0 FROMGIT: dt-bindings: soundwire: qcom: Document v3.1.0 version of IP block FROMGIT: soundwire: qcom: prepare for v3.x FROMLIST: ASoC: qcom: lpass-va-macro: Add shikra compatible FROMLIST: ASoC: qcom: lpass-rx-macro: Add shikra compatible FROMLIST: ASoC: qcom: Add Shikra QAIF support FROMLIST: ASoC: qcom: Add QAIF IRQ handling, suspend/resume and platform register FROMLIST: ASoC: qcom: Add QAIF PCM operations FROMLIST: ASoC: qcom: Add QAIF regmap, DT parsing and platform init FROMLIST: ASoC: qcom: lpass-cpu: Use asoc_qcom_of_xlate_dai_name helper FROMLIST: ASoC: qcom: Add generic of_xlate_dai_name helper to common FROMLIST: arm64: dts: qcom: Add changes for usb on IQS platform PENDING: arm64: dts: qcom: Add typec role switching changes to shikra FROMLIST: arm64: dts: qcom: Add USB changes for Shikra FROMLIST: arm64: dts: qcom: shikra-iqs-evk: Enable both ethernet ports FROMLIST: arm64: dts: qcom: shikra-cqs-evk: Enable ethernet0 FROMLIST: arm64: dts: qcom: shikra-cqm-evk: Enable ethernet0 FROMLIST: arm64: dts: qcom: shikra: Add ethernet nodes FROMLIST: net: stmmac: qcom-ethqos: add Shikra EMAC support FROMLIST: net: stmmac: qcom-ethqos: add per-platform NOC clock voting FROMLIST: net: stmmac: qcom-ethqos: fix RGMII_ID mode to use DLL bypass FROMLIST: net: stmmac: qcom-ethqos: convert ethqos_rgmii_macro_init() to void FROMLIST: dt-bindings: net: qcom,ethqos: add qcom,shikra-ethqos compatible BACKPORT: net: stmmac: qcom-ethqos: use read_poll_timeout_atomic() BACKPORT: net: stmmac: qcom-ethqos: add rgmii set/clear functions BACKPORT: net: stmmac: qcom-ethqos: use u32 for rgmii read/write/update Revert "FROMLIST: net: stmmac: Inverse the phy-mode definition" FROMLIST: ASoC: qcom: Add QAIF AIF DAI ops FROMLIST: ASoC: qcom: Add QAIF CIF (CDC DMA) DAI ops FROMLIST: ASoC: qcom: Add QAIF shared data structures and variant interface FROMLIST: ASoC: qcom: Add QAIF hardware register map FROMLIST: ASoC: codecs: add Qualcomm WSA885X I2C codec driver FROMLIST: dt-bindings: sound: add qcom,wsa885x-i2c WORKAROUND: usb: dwc3: qcom: Add support to keep GDSC On during host mode bus suspend WORKAROUND: clk: qcom: gcc: Use gdsc_synced_poweroff_disable for USB GDSC's FROMLIST: swiotlb: introduce Kconfig option for compile-time default pool size WORKAROUND: clk: qcom: gdsc: Conditionally disable GDSC if synced_poweroff flag is set FROMLIST: clk: qcom: gdsc: Add custom disable callback for GX GDSC FROMLIST: MAINTAINERS: Add Qualcomm QAIF driver entry FROMLIST: dt-bindings: sound: Add Qualcomm QAIF binding FROMLIST: dt-bindings: sound: Add Qualcomm QAIF DAI ID header FROMLIST: ASoC: dt-bindings: qcom: Add Shikra rx and va macro codecs PENDING: arm64: dts: enable iris driver for hamoa kvm FROMLIST: arm64: dts: qcom: Add PMIC thermal support for Shikra IQ2390S SoM platform FROMLIST: arm64: dts: qcom: Add PMIC thermal support for Shikra CQ2390M SoM platform FROMLIST: arm64: dts: qcom: pm8005: Add temp alarm node FROMLIST: arm64: dts: qcom: pm4125: Add VADC and temp alarm nodes FROMLIST: dt-bindings: arm-smmu: Document GPU SMMU for Shikra SoC FROMLIST: drm/msm/adreno: Add support for A704 GPU FROMLIST: dt-bindings: display/msm/gpu: Add support for A704 GPU QCLINUX: arm64: configs: qcom: Enable SCHED_CLASS_EXT (sched_ext) FROMLIST: thermal: qcom: add support for PMIC5 Gen3 ADC thermal monitoring FROMLIST: iio: adc: qcom-spmi-adc5-gen3: Share SDAM0 IRQ with ADC_TM auxiliary driver FROMLIST: iio: adc: Add support for QCOM PMIC5 Gen3 ADC FROMLIST: dt-bindings: iio: adc: Add support for QCOM PMIC5 Gen3 ADC FROMLIST: dt-bindings: iio: adc: Split out QCOM VADC channel properties FROMLIST: arm64: dts: qcom: monaco-pmics: Add ADC support for PMM8620AU FROMLIST: arm64: dts: qcom: lemans-pmics: Add ADC support for PMM8654au FROMLIST: arm64: dts: qcom: Add header file for ADC5 Gen3 channel macros FROMLIST: thermal: qcom: Add support for Qualcomm MBG thermal monitoring FROMLIST: dt-bindings: thermal: Add Qualcomm MBG thermal monitor support FROMLIST: arm64: dts: qcom: Enable SD card for Shikra EVK FROMLIST: arm64: dts: qcom: Add SD Card support for Shikra SoC QCLINUX: arm64: dts: qcom: Monaco: Add RTSS Mailbox device tree overlay QCLINUX: arm64: dts: qcom: lemans: Add RTSS Mailbox device tree overlay QCLINUX: dt-bindings: mailbox: qcom-ipcc: Add RTSS client IDs Signed-off-by: Salendarsingh Gaud <sgaud@qti.qualcomm.com> (cherry picked from commit f7cd2fc)
sbanerjeeqc
approved these changes
Jun 28, 2026
Ricardo Salveti (ricardosalveti)
requested changes
Jun 28, 2026
Ricardo Salveti (ricardosalveti)
left a comment
Ricardo Salveti (ricardosalveti)
left a comment
Contributor
There was a problem hiding this comment.
I prefer waiting the validation with shikra as part of #2450 first, to make sure we won't require additional changes.
Member
Sure Agree |
Contributor
|
Ricardo Salveti (@ricardosalveti) Shikra validation results with #2450 are avilable at #2450 (comment). Can this PR be considered for merging? |
Viswanath Kraleti (vkraleti)
approved these changes
Jun 30, 2026
Contributor
|
It still has Ricardo's veto. |
Contributor
We can once we're good to merge #2450, there are still some failures there and no extra comments about them. |
Ricardo Salveti (ricardosalveti)
approved these changes
Jun 30, 2026
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
6 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Description
Backport of #2625 to
wrynose.