Skip to content

Vallox RS-485 MQTT gateway to integrate Vallox RS485 ventilation device to Home Assistant via MQTT. Implements Home Assistant MQTT discovery but can also be used without Home Assistant.

License

Notifications You must be signed in to change notification settings

pvainio/vallox-mqtt

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

28 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Vallox RS485 MQTT gateway for Home Assistant

Overview

This rs485 mqtt gateway can be used to publish events from Vallox rs485 serial bus to mqtt and send commands to Vallox devices via mqtt.

It supports Home Assistant MQTT Discovery but can also be used without Home Assistant.

Only requirement is MQTT Broker to connect to.

Supported features

Supports following features:

  • Home Assistant MQTT discovery, published device automatically to Home Assistant
  • Published regular intervals:
    • Ventilation fan speed
    • Outside temperature (sensor.temperature_incoming_outside)
    • Incoming temperature (sensor.temperature_incoming_inside)
    • Inside temperature (sensor.temperature_outgoing_inside)
    • Exhaust temperature (sensor.temperature_outgoing_outside)
  • Change ventilation speed

Supported devices

Use at your own risk.

Only tested with:

  • Vallox Digit SE model 3500 SE made in 2001 (one with old led panel, no lcd panel)

Newer devices might use different registers for temperatures, try configuration NEW_PROTOCOL=true for those.

Might work with other Vallox devices with rs485 bus. There probably are some differences between different devices. If there are those probably are easy to adapt to.

The application itself has been tested running on Raspberry Pi 3, but probably works just fine with Raspberry Zero or anything running linux.

To compile for Raspberry PI: env GOOS=linux GOARCH=arm go build -o vallox_mqtt

Quality RS485 adapter should be used, there can be strange problems with low quality ones.

Example usecase

Can be used to monitor and command Vallox ventilation device with Home Assistant. Raspberry Pi with properer usb to rs485 adapter can act as a gateway between Vallox and MQTT (and Home Assistant). Automation can be built to increase the speed in case of high CO2 or high humidity even if the Vallox device is not installed with co2 and humidity sensors.

Home Assistant Card screenshots

Speed select and graph: outdoor temp grap

Temperature graph: outdoor temp grap

Outdoor temperature graph: outdoor temp grap

Configuration

Application is configure with environment variables

variable required default description
SERIAL_DEVICE x serial device, for example /dev/ttyUSB0
MQTT_URL x mqtt url, for example tcp://10.1.2.3:8883
MQTT_USER mqtt username
MQTT_PASSWORD mqtt password
MQTT_CLIENT_ID same as DEVICE_ID mqtt client id
DEVICE_ID vallox id for homeassistant device and also act as mqtt base topic
DEVICE_NAME Vallox Home assistant device name
DEBUG false enable debug output, true/false
ENABLE_WRITE false enable sending commands/writing to bus, true/false
SPEED_MIN 1 minimum speed for the device, between 1-8. Used for HA discovery to have correct min value in UI
ENABLE_RAW false enable sending raw events to mqtt, otherwise only known changes are sent
OBJECT_ID true Send object_id with HA Auto Discovery for HA entity names
NEW_PROTOCOL false Use different registers for newer devices

Multiple Devices

Running multiple devices is supported (although not tested). Currently this requires running own process for each device. DEVICE_ID and DEVICE_NAME shoud be set uniquely for each device, like DEVICE_ID=vallox1, DEVICE_NAME="Vallox 1" for one device and DEVICE_ID=vallox2, DEVICE_NAME="Vallox 2" for other device.

Usage

For example with following script

#!/bin/sh

# Change to your real rs485 device
export SERIAL_DEVICE=/dev/ttyUSB0
# Change to your real mqtt url
export MQTT_URL=tcp://localhost:8883
# Set device id and name, in case of multiple devices
export DEVICE_ID=valloxupstairs
export DEVICE_NAME="Vallox Upstairs"

./vallox-mqtt

MQTT Topics used

With default configuration:

  • homeassistant/status subscribe to HA status changes
  • vallox/fan/set subscribe to fan speed commands
  • vallox/fan/speed publish fan speeds
  • vallox/temperature_incoming_outside Outdoor temperature
  • vallox/temperature_incoming_inside Incoming temperature
  • vallox/temperature_outgoing_inside Inside temperature
  • vallox/temperature_outgoing_outside Exhaust temperature
  • vallox/raw/# Raw register value changes (if raw values are enabled)

If DEVICE_ID is specified it is used as mqtt base topic, for example if DEVICE_ID=vallox1 then topics would be:

  • vallox1/fan/set subscribe to fan speed commands
  • vallox1/fan/speed publish fan speeds
  • vallox1/temperature_incoming_outside Outdoor temperature
  • vallox1/temperature_incoming_inside Incoming temperature
  • vallox1/temperature_outgoing_inside Inside temperature
  • vallox1/temperature_outgoing_outside Exhaust temperature
  • vallox1/raw/# Raw register value changes (if raw values are enabled)

Home Assistant sensors

If mqtt auto discovery is used and OBJECT_ID is true (default) Home Assistant sensors are created based on DEVICE_ID like:

  • sensor.vallox_fan_speed
  • select.vallox_fan_select
  • sensor.vallox_temp_incoming_outside
  • sensor.vallox_temp_incoming_insise
  • sensor.vallox_temp_outgoing_inside
  • sensor.vallox_temp_outgoing_outside

Without OBJECT_ID sensor ids are automatically created by HA based on sensor names

About

Vallox RS-485 MQTT gateway to integrate Vallox RS485 ventilation device to Home Assistant via MQTT. Implements Home Assistant MQTT discovery but can also be used without Home Assistant.

Topics

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages