Merge pull request #8 from vosechu/gh-pages

create the basic doc for the ground table

02-RocketTable.markdown

@@ -34,7 +34,7 @@ Start with the Avionics Stack on the rocket cart and batteries charged
  1. `ping 10.10.10.5`
     - Actually talking to the RocketNet Hub
  1. Connect to [commander](https://github.com/psas/commander) running on the nuc from  your laptop.
-    - Open a browser to the ip of the NUC, port 5000
+    - Open a browser to <http://ground.psas.lan:5000/>
 
 ## In commander
  1. RNH tab -> click "[1] FC On"

03-FlightDirectorTable.markdown

@@ -0,0 +1,67 @@
+---
+title: Seting up the flight director table
+layout: base
+---
+
+# Flight director table setup
+
+## Starting up the flight director table
+
+1. Plug it in to the wall
+1. Switch on the surge protector
+1. Check for blinking lights on the router
+1. Turn on the NUC (bottom slider shelf, silver button on top)
+1. Login as root, pass on the sticky
+
+## Start up the launch tower computer
+
+1. Setup LTC {link to other procedure book}
+
+## Boot up Kivi on the flight director table
+
+1. Open terminal
+1. `cd psas/launch-tower-comm/launch-tower-comm`
+1. `./ltc.py`
+1. Verify that the upper right says "Nominal"
+1. Play with the LTC to your heart's content
+
+## Boot Commander on the flight director table
+
+1. New terminal tab
+1. `cd psas/commander`
+1. `python app.py` to run in debug mode. Then you can point your laptop at the NUC directly
+
+## Bring up the flight computer
+
+1. {link again to other procedure book}
+
+## Bring up telemetry
+
+1. New terminal tab
+1. `cd psas/telemetry`
+1. `./telemetry.py`
+1. <http://ground.psas.lan:8080/>
+
+### Getting the trackmaster running
+
+1. `ssh [email protected]` (password on the base of the avionics stack)
+1. `./startFC`
+  1. It should give you a happy message
+
+### Start up the trackmaster
+
+1. Check that the lan and PoE cables are correctly installed
+  1. LAN goes to router (NOT THE POE CABLE!)
+  1. POE cable goisg to the black box on the trackmaster
+1. Plug in the cable labeled POE
+  1. Green light on the black box
+  1. A little later a blue blinky light on the clear box
+  1. Green light on the board by the antenna
+1. Data should be coming in to ground.psas.lan
+
+## Getting video from the raspicams
+
+1. Get the flight computer running via Commander
+1. Boot up raspicam1 from Commander
+1. Make sure the trackmaster is running
+1. Open VLC on your laptop and connect to `rtsp://10.0.0.3:8554/`