The first stealth modchip supporting unlocking BIOS of Japanese versions Sony PlayStation 1
Developed by brill & postal2201, based on PSNee V7 open source project.
PsNee V8 supports the following MCU's:
- ATmega328(A/P/PA) @16Mhz
- ATmega168(A/P/PA) @16Mhz
Use the programmer to flash MCU. Flashing via COM port is not supported.
Before flashing the MCU, you need to configure the fuses.
- Fuses for JAP_FAT consoles: H: DF, L: EE, E: FF
- Fuses for all other consoles: H: DF, L: FF, E: FF
To install via the Arduino IDE may require the installation of the MiniCore package.
Example of correct setting for ATmega328P:
Don't use a bootloader!
After that select the type console - uncoment define in file project(*.ino)
Final step: Sketch -> Upload Using Programmer
