Development

examples/sparkles.py

@@ -17,42 +17,38 @@
 
 period = math.pi * EFFECT_SPEED
 
-try:
-    while True:
-        t = time.ticks_ms() / 1000 * period
-        t *= 0.5
-
-        for i in range(NUM_LEDS):
-            led_offset = i / NUM_LEDS
-            led_offset *= math.pi
-            led_offset *= 3
-            led_offset += t
-
-            # A sine with a 2x period, shifted to 0 to 254
-            # This provides a brightness cycling effect phase-locked to the LEDs
-            br = (math.sin(t / 2 + led_offset) + 1) * 127
-
-            # Calculate slightly out of phase sine waves for the red, green and blue channels
-            r = (math.sin(led_offset + (period * 0.85)) + 1) / 2
-            g = (math.sin(led_offset + (period * 0.90)) + 1) / 2
-            b = (math.sin(led_offset + (period * 0.95)) + 1) / 2
-
-            # Convert the slow procession of the sine wave into a brief pulse
-            # by raising it by a power we've called EFFECT_SHARPNESS
-            # https://www.wolframalpha.com/input?i=plot+pow%28%28sin%28x%29+%2B+1%29+%2F+2.0%2C+10%29%2C+%28sin%28x%29+%2B+1%29+%2F+2.0
-            r = min(1, max(0, math.pow(r, EFFECT_SHARPNESS)))
-            g = min(1, max(0, math.pow(g, EFFECT_SHARPNESS)))
-            b = min(1, max(0, math.pow(b, EFFECT_SHARPNESS)))
-
-            # Tune the output colours and apply brightness
-            # This is a nice greeny teal
-            r = 0
-            g = int(g * br)
-            b = int(g * 0.6)
-
-            led_strip.set_rgb(i, g, r, b)
-
-        time.sleep(1.0 / EFFECT_FPS)
-finally:
-    led_strip.clear()
-    led_strip.stop()
+while True:
+    t = time.ticks_ms() / 1000 * period
+    t *= 0.5
+
+    for i in range(NUM_LEDS):
+        led_offset = i / NUM_LEDS
+        led_offset *= math.pi
+        led_offset *= 3
+        led_offset += t
+
+        # A sine with a 2x period, shifted to 0 to 254
+        # This provides a brightness cycling effect phase-locked to the LEDs
+        br = (math.sin(t / 2 + led_offset) + 1) * 127
+
+        # Calculate slightly out of phase sine waves for the red, green and blue channels
+        r = (math.sin(led_offset + (period * 0.85)) + 1) / 2
+        g = (math.sin(led_offset + (period * 0.90)) + 1) / 2
+        b = (math.sin(led_offset + (period * 0.95)) + 1) / 2
+
+        # Convert the slow procession of the sine wave into a brief pulse
+        # by raising it by a power we've called EFFECT_SHARPNESS
+        # https://www.wolframalpha.com/input?i=plot+pow%28%28sin%28x%29+%2B+1%29+%2F+2.0%2C+10%29%2C+%28sin%28x%29+%2B+1%29+%2F+2.0
+        r = min(1, max(0, math.pow(r, EFFECT_SHARPNESS)))
+        g = min(1, max(0, math.pow(g, EFFECT_SHARPNESS)))
+        b = min(1, max(0, math.pow(b, EFFECT_SHARPNESS)))
+
+        # Tune the output colours and apply brightness
+        # This is a nice greeny teal
+        r = 0
+        g = int(g * br)
+        b = int(g * 0.6)
+
+        led_strip.set_rgb(i, g, r, b)
+
+    time.sleep(1.0 / EFFECT_FPS)

modules/wireless/ezwifi.py

@@ -20,6 +20,8 @@ def __init__(self, **kwargs):
 
         self._verbose = get("verbose", False)
 
+        self._spce = get("spce", False)
+
         self._events = {
             "connected": get("connected", None),
             "failed": get("failed", None),
@@ -28,7 +30,14 @@ def __init__(self, **kwargs):
             "error": get("error", None)
         }
 
-        self._if = network.WLAN(network.STA_IF)
+        if self._spce:
+            # Use the SP/CE pins for this board
+            wifi_pins = {"pin_on": 8, "pin_out": 11, "pin_in": 11, "pin_wake": 11, "pin_clock": 10, "pin_cs": 9}
+        else:
+            # Try to get custom pins from kwargs
+            wifi_pins = {key: kwargs[key] for key in kwargs if key.startswith("pin_")}
+
+        self._if = network.WLAN(network.STA_IF, **wifi_pins)
         self._if.active(True)
         # self._if.config(pm=0xa11140) # TODO: ???
         self._statuses = {v: k[5:] for (k, v) in network.__dict__.items() if k.startswith("STAT_")}
@@ -120,5 +129,8 @@ def _secrets(self):
             raise ImportError("secrets.py: missing or invalid!") from e
 
 
-def connect(**kwargs):
-    return asyncio.get_event_loop().run_until_complete(EzWiFi(**kwargs).connect(retries=kwargs.get("retries", 10)))
+def connect(*args, **kwargs):
+    ssid, password = None, None
+    if len(args) == 2:
+        ssid, password = args
+    return asyncio.get_event_loop().run_until_complete(EzWiFi(**kwargs).connect(ssid, password, retries=kwargs.get("retries", 10)))

modules/wireless/lte.py

@@ -33,6 +33,7 @@ def __init__(self, apn, uart=None, reset_pin=None, netlight_pin=None, netlight_l
 
         # Set PPP timeouts and rxbuf
         self._uart.init(
+            baudrate=DEFAULT_UART_STARTUP_BAUD,
             timeout=DEFAULT_UART_TIMEOUT,
             timeout_char=DEFAULT_UART_TIMEOUT_CHAR,
             rxbuf=DEFAULT_UART_RXBUF)
@@ -80,6 +81,11 @@ def stop_ppp(self):
         self._ppp.disconnect()
         self._send_at_command(f"AT+IPR={DEFAULT_UART_STARTUP_BAUD}")
         self._flush_uart()
+        self._uart.init(
+            baudrate=DEFAULT_UART_STARTUP_BAUD,
+            timeout=DEFAULT_UART_TIMEOUT,
+            timeout_char=DEFAULT_UART_TIMEOUT_CHAR,
+            rxbuf=DEFAULT_UART_RXBUF)
 
     def start_ppp(self, baudrate=DEFAULT_UART_BAUD, connect=True):
         self._wait_ready(poll_time=1.0, timeout=30)