Arduino 32uMega based midi synthesizer using the Mozzi Library and MIDIUSB libraries also recently changed to using the AdventureKid Wavetables I found that had been converted to 512 Samples.
Any questions please ask me. [email protected]
Building it yourself if you are building it yourself Load up the sketch in the arduino IDE and solder an audio jack to pins 9 and ground respectively.. Tip to pin 9 and Sheild to Ground
OK. So it's a 3 Oscillator 3 Envelope synthesizer. I didn't want to implement the time and energy into this project to use hardware controls for the parameter inputs. Instead I've opted to use an application called TouchOSC. available for download at https://hexler.net/touchosc
the Trial version works fine on a computer or laptop. For use on a tablet or phone, you will need to purchase the appropriate application.
In the resource folder you will find the latest TouchOSC file Plug in the DD03 to a USB port and the Audio jack into a mixer. this has NO output protection and in my case outputs a 0-5V audio signal. I will be implementing an audio output buffer stage at some point
Load the DD03 file from the resource directory in TouchOsc. Configure the preferences in the MIDI scetion to allow input from your computer and output to the Sparkfun ProMicro or other 32uMega devboard.
Email me at [email protected] for questions or whatever.
if you want to just buy one. I'll send you one preloaded and give you whatever support I can for $20USD. email me. I'm not a musician, I'm just a tinkerer but this is pretty decent I think. I need more input.
I guess I'll start a discussion section,
Thanks, Damon