CNTRLPLANE-1310: register the OTE binary for secondary scheduler operator

[sandeepknd]

Register the OTE binary secondary-scheduler-operator as part of JIRA CNTRLPLANE-1310 (first PR for OTE infra changes and the relevant dependencies already merged).

[openshift-ci-robot]

Pipeline controller notification
This repo is configured to use the pipeline controller. Second-stage tests will be triggered either automatically or after lgtm label is added, depending on the repository configuration. The pipeline controller will automatically detect which contexts are required and will utilize /test Prow commands to trigger the second stage.

For optional jobs, comment /test ? to see a list of all defined jobs. To trigger manually all jobs from second stage use /pipeline required command.

This repository is configured in: automatic mode

[openshift-ci-robot]

@sandeepknd: This pull request references CNTRLPLANE-1310 which is a valid jira issue.

Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the task to target the "4.21.0" version, but no target version was set.

Details

In response to this:

Register the OTE binary secondary-scheduler-operator as part of JIRA CNTRLPLANE-1310 (first openshift/secondary-scheduler-operator#695 for OTE infra changes and the relevant dependencies already merged).

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.

[openshift-ci-robot]

@sandeepknd: This pull request references CNTRLPLANE-1310 which is a valid jira issue.

Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the task to target the "4.21.0" version, but no target version was set.

Details

In response to this:

Register the OTE binary secondary-scheduler-operator as part of JIRA CNTRLPLANE-1310 (first PR for OTE infra changes and the relevant dependencies already merged).

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.

[openshift-ci]

[APPROVALNOTIFIER] This PR is NOT APPROVED

This pull-request has been approved by: sandeepknd
Once this PR has been reviewed and has the lgtm label, please assign bertinatto for approval. For more information see the Code Review Process.

The full list of commands accepted by this bot can be found here.

Details

Needs approval from an approver in each of these files:

• OWNERS

Approvers can indicate their approval by writing /approve in a comment
Approvers can cancel approval by writing /approve cancel in a comment

[openshift-ci-robot]

Scheduling required tests:
/test e2e-aws-csi
/test e2e-aws-ovn-fips
/test e2e-aws-ovn-microshift
/test e2e-aws-ovn-microshift-serial
/test e2e-aws-ovn-serial-1of2
/test e2e-aws-ovn-serial-2of2
/test e2e-gcp-csi
/test e2e-gcp-ovn
/test e2e-gcp-ovn-upgrade
/test e2e-metal-ipi-ovn-ipv6
/test e2e-vsphere-ovn
/test e2e-vsphere-ovn-upi

[sandeepknd]

/retest

[sandeepknd]

/retest

[sandeepknd]

/test e2e-aws-csi

[sandeepknd]

/retest

[sandeepknd]

/retest

[openshift-ci]

@sandeepknd: The following tests failed, say /retest to rerun all failed tests or /retest-required to rerun all mandatory failed tests:

Test name	Commit	Details	Required	Rerun command
ci/prow/e2e-vsphere-ovn	9fe4c5a	link	true	/test e2e-vsphere-ovn
ci/prow/e2e-aws-ovn-fips	9fe4c5a	link	true	/test e2e-aws-ovn-fips
ci/prow/e2e-gcp-ovn	9fe4c5a	link	true	/test e2e-gcp-ovn
ci/prow/e2e-aws-ovn-serial-1of2	9fe4c5a	link	true	/test e2e-aws-ovn-serial-1of2
ci/prow/e2e-gcp-csi	9fe4c5a	link	true	/test e2e-gcp-csi
ci/prow/e2e-vsphere-ovn-upi	9fe4c5a	link	true	/test e2e-vsphere-ovn-upi
ci/prow/e2e-aws-ovn-serial-2of2	9fe4c5a	link	true	/test e2e-aws-ovn-serial-2of2
ci/prow/e2e-gcp-ovn-upgrade	9fe4c5a	link	true	/test e2e-gcp-ovn-upgrade
ci/prow/e2e-metal-ipi-ovn-ipv6	9fe4c5a	link	true	/test e2e-metal-ipi-ovn-ipv6
ci/prow/e2e-aws-ovn-microshift	9fe4c5a	link	true	/test e2e-aws-ovn-microshift
ci/prow/e2e-aws-csi	9fe4c5a	link	true	/test e2e-aws-csi
ci/prow/e2e-aws-ovn-microshift-serial	9fe4c5a	link	true	/test e2e-aws-ovn-microshift-serial

Full PR test history. Your PR dashboard.

Details

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository. I understand the commands that are listed here.

[openshift-trt]

Job Failure Risk Analysis for sha: 9fe4c5a

Job Name	Failure Risk
pull-ci-openshift-origin-main-e2e-aws-csi	IncompleteTests Tests for this run (76) are below the historical average (1928): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems)
pull-ci-openshift-origin-main-e2e-aws-ovn-fips	IncompleteTests Tests for this run (77) are below the historical average (3476): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems)
pull-ci-openshift-origin-main-e2e-aws-ovn-microshift	IncompleteTests Tests for this run (27) are below the historical average (1701): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems)
pull-ci-openshift-origin-main-e2e-aws-ovn-microshift-serial	IncompleteTests Tests for this run (27) are below the historical average (883): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems)
pull-ci-openshift-origin-main-e2e-aws-ovn-serial-1of2	IncompleteTests Tests for this run (76) are below the historical average (2047): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems)
pull-ci-openshift-origin-main-e2e-aws-ovn-serial-2of2	IncompleteTests Tests for this run (76) are below the historical average (1989): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems)
pull-ci-openshift-origin-main-e2e-gcp-csi	IncompleteTests Tests for this run (77) are below the historical average (1903): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems)
pull-ci-openshift-origin-main-e2e-gcp-ovn	IncompleteTests Tests for this run (77) are below the historical average (3481): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems)
pull-ci-openshift-origin-main-e2e-gcp-ovn-upgrade	IncompleteTests Tests for this run (77) are below the historical average (2002): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems)
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn-ipv6	IncompleteTests Tests for this run (72) are below the historical average (3048): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems)
pull-ci-openshift-origin-main-e2e-vsphere-ovn	IncompleteTests Tests for this run (74) are below the historical average (3462): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems)
pull-ci-openshift-origin-main-e2e-vsphere-ovn-upi	IncompleteTests Tests for this run (73) are below the historical average (3467): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems)