Universal Library for Linux (WebDAQ)

Info: Contains a library to access DAQ modules on the WebDAQ devices over the Linux platform. The UL for Linux binary name is libulwd.

Install Instructions

---

1. Download the latest version of ulwd:

  $ cd ~
  $ wget https://github.com/sbazaz/ulwd/releases/download/v0.0.1-beta.1/libulwd.0.0.1-b1.tar.bz2

2. Extract the tar file:

  $ tar -xvjf libulwd.0.0.1-b1.tar.bz2

3. Run the following commands to install the library:

  $ cd libulwd
  $ sudo sh install.sh

4. Reboot the WebDAQ system

Examples

The C examples are located in the examples folder. Run the following commands to build the examples:

  $ cd ~/libulwd/examples
  $ make

To execute the examples, run the following commands:

./AInScan
./AInScan_IEPE

Note: The DAQ module's firmware is stored in a volatile memory, therefore the firmware image will be lost when the WebDAQ system is shut down. The ulGetDeviceInventory function loads the firmware image to the module when it is invoked for the first time after system boot up. Loading the firmware image takes about 5 to 8 seconds.