Skip to content

A library for using the TM1637 LED driver control IC on Raspberry Pi OS (Raspbian)

License

Notifications You must be signed in to change notification settings

neildavis/lib_tm1637_rpi

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

21 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

lib_tm1637_rpi

A library for using the TM1637 LED driver control IC to drive a 4 x 7-segment display from Raspberry Pi OS (Raspbian). Includes a small say utility to scroll some text.

This library does not access the GPIO pins itself. Instead, it has been designed to allow the use of different 'backend' GPIO libraries through the use of polymorphism and dynamic loading to provide a runtime choice of GPIO library. The currently supported GPIO libraries include:

By default, libgpiod will be used.

You must ensure you have installed the GPIO library that you wish to use (see Prerequisites below), but your program does not have to link to any GPIO library at build time. The GPIO library is dynamically loaded at runtime using dlopen().

Features

  • Show any combination of segments on up to four digits controlled by the TM1637.
  • Independent control over the 'colon' character.
  • Independent control over the display brightness.
  • APIs to show numerical literals in both decimal (e.g. 1234) & hexadecimal (e.g. 0xabcd).

Prerequisites

Building

You will need cmake v3.9 or higher and the necessary C++ development tools installed in order to build and install the library:

sudo apt install build-essential cmake

libgpiod

If you wish to use libgpiod for GPIO access, you will need to install the gpiod package:

sudo apt install gpiod

pigpio / pigpiod

If you wish to use the pigpio library and/or pigpiod for GPIO access, you may need to install the pigpiod package (although it may already be included by default in your OS image):

sudo apt install pigpiod

When using the pigpio 'library interface' your app will need to run as the 'root' user (or under 'sudo') to have permission to access the GPIO pins. You must also ensure that pigpiod is NOT currently running.

When using the pigpiod daemon, the library will connect to the daemon on localhost by default. If you wish to connect to a daemon on a different interface (or machine) you can do this by setting the PIGPIO_ADDR and PIGPIO_PORT environment variables as described in the documentation for pigpio_start()

WiringPi

wiringPi was removed from v11 ('Bullseye') of Raspberry Pi OS packages. If you wish to use wiringPi for GPIO access you will need to build & install it manually by following the instructions. Create a new directory somewhere, clone the source and build & install:

git clone --depth 1 https://github.com/WiringPi/WiringPi.git
cd WiringPi
./build
ldconfig

Building & Installing

Build Configuration

From this repo's root directory, create and change to a new build directory:

mkdir build
cd build

Shared vs Static Library

By default the library will be configured to build as a shared library (.so) which is the recommended usage:

cmake -G"Unix Makefiles" ..

If you prefer to configure the library to build as a static library (.a) then you must declare BUILD_SHARED_LIBS as OFF when calling cmake. e.g.

cmake -DBUILD_SHARED_LIBS=OFF -G"Unix Makefiles" ..

IMPORTANT: Changing configuration

If you wish to change the configuration options above, be sure to delete the CMakeCache.txt file before calling cmake again. It's also wise to perform a 'make clean' before rebuilding:

make clean
rm CMakeCache.txt

Building & Install

After configuring the build, you can build and install the library by simply invoking make from the build directory:

sudo make install

You may or may not need to use the sudo prefix this command depending on your user permissions:

Usage

pkg-config

For ease of use the library installs with pkg-config support. This means you can automatically find all the required compiler command line options for using the library by issuing the command:

pkg-config --libs --cflags libTM1637Pi

An example of how to compile & link your program against the library:

g++ -Wall -std=c++11 myprogram.cpp -o myprogram $(pkg-config --libs --cflags libTM1637Pi)

Compiling

The library makes use of C++11 features, so you will need to include the relevant flag when invoking your compiler. e.g. for (modern versions of) GCC (g++) you would use '-std=c++11'

The library's public headers are installed into the system default directory (e.g. /usr/local/include). Add the following to your CPPFLAGS when invoking the compiler, ONLY if you are not using pkg-config:

-I/usr/local/include

Linking

The library is installed into the system default directory (e.g. /usr/local/lib). Add the following options when invoking your compiler, ONLY if you are not using pkg-config:

-L/usr/local/lib -lTM1637Pi -ldl

API

The public API is included in the public header file tm1637.h which will be installed into the system default includes directory (e.g. /usr/local/include).

Example

See the example code in the example directory for a demonstration of the library's features. The example can be built and run with the following commands from the top level dir of this repo:

cd example
./build_for_gpiod.sh
# or ./build_for_wiringpi.sh 
# or ./build_for_pigpio_interface.sh 
# or ./build_for_pigpio_daemon.sh 
./tm1637_example 

tm1637_say utility

A simple utility using lib_tm1637_rpi to scroll some text on a TM1637 display is included as part of the build. The cmake install action will also install it into the default binary installation directory which should be already included in your $PATH

tm1637_say usage

Running tm1637_say without any arguments, or with --help will display help & usage information:

$ tm1637_say 
tm1637_say utility - © 2023 Neil Davis
See LICENSE at https://github.com/neildavis/lib_tm1637_rpi/blob/main/LICENSE

Usage: tm1637_say [OPTIONS] <message>

Available OPTIONS:
  -h [ --help ]                      Show usage information
  -c [ --scl ] arg (=3)              GPIO pin to use for clock
  -d [ --sda ] arg (=2)              GPIO pin to use for data
  -g [ --gpio-lib ] arg (=GpioGPIOD) GPIO library
  -t [ --delay-time ] arg (=250)     Delay time between characters (ms)
  -n [ --count ] arg (=1)            Repeat the message <arg> number of times
  -v [ --verbose ] [=arg(=1)] (=0)   Enable/Disable verbose output

e.g. the following invocation uses the wiringPi library with BCM pin numbering, pins 23 & 24 for SCL & SDA respectively, and displays a message faster than the default three times over :

tm1637_say -c 23 -d 24 -g GpioWiringPiBCM -t 100 -n 3 "HELLO WORLD"