Initial skeleton for v2

.gitignore

@@ -63,3 +63,9 @@ target/
 .ipynb_checkpoints
 venv
 .idea
+
+# pyenv
+.python-version
+
+# personal dir
+private/

AUTHORS

@@ -5,3 +5,4 @@ Syed Shekupillai <[email protected]>
 Ashna Shah <[email protected]>
 Wim Henderickx <[email protected]>
 Jeroen van Bemmel <[email protected]>
+Tim Raphael <[email protected]>

VERSION

@@ -1 +1 @@
-1.0.5
+2.0.0

examples/example.py

@@ -0,0 +1,77 @@
+# Copyright 2020 Nokia
+# Licensed under the Apache License 2.0.
+# SPDX-License-Identifier: Apache-2.0
+"""
+This is a simple example of how to use napalm-srlinux.
+First, deploy the SR Linux container using containerlab:
+
+```
+CLAB_LABDIR_BASE=/tmp \
+sudo -E clab deploy -c -t srlinux.dev/clab-srl
+```
+
+Then uncomment the NAPALM API calls that you want to run and run this script:
+
+python examples/example.py
+"""
+
+from napalm import get_network_driver
+
+# using rich to pretty print the output
+# feel free to remove it if you don't want to install it
+from rich import print_json
+
+driver = get_network_driver("srlinux")
+optional_args = {
+    # "jsonrpc_port": 80,
+    # "skip_verify": True,
+    "insecure": True
+}
+with driver("srl", "admin", "NokiaSrl1!", optional_args=optional_args) as device:
+    # print_json(data=device.get_bgp_config(neighbor="", group="")) #Done
+    # print_json(data=device.get_bgp_config(neighbor="", group="ebgp")) #Done
+    # print_json(data=device.get_bgp_config(neighbor="10.1.1.2", group="")) #Done
+    # print_json(data=device.get_config(retrieve="all", full=False, sanitized=False))
+    # print_json(data=device.get_config(retrieve="running", full=False, sanitized=False))
+    # print_json(data=device.get_config(retrieve="candidate", full=False, sanitized=False))
+    # print_json(data=device.get_config(retrieve="state", full=False, sanitized=False))
+    # print_json(data=device.get_ntp_stats())
+    # print_json(data=device.get_optics())
+    # print_json(data=device.get_route_to())
+    # print_json(data=device.get_route_to("1.0.4.0/24"))
+    # print_json(data=device.get_route_to("100.100.100.100"))
+    # print_json(data=device.get_route_to(destination="172.20.20.0/24"))
+    # print_json(data=device.get_route_to(protocol="bgp"))
+    # print_json(data=device.get_route_to(protocol="host"))
+    # print_json(data=device.get_mac_address_table()) #Done
+    # print_json(data=device.get_snmp_information())
+    # print(device.is_alive())
+    # print_json(data=device.cli(["date","info system information","show network-instance default protocols bgp neighbor"]))
+    # print(device.load_merge_candidate(filename="/root/syed/backup/napalm-srl-dev/demo_merge.json"))
+    # print(device.load_replace_candidate(filename="/home/nuage/json_compare/srl2_2000_Ori_WithBGP.json"))
+    # print_json(data=device.commit_config("test commit"))
+    # print_json(data=device.compare_config())
+    # print_json(data=device.discard_config())
+    # print_json(data=device.rollback())
+    # print_json(data=device.ping(destination="11.1.1.2"))
+    # print_json(data=device.ping(destination="11.1.1.2",source="10.1.1.1",ttl=2, timeout=2, size=64, count=2, vrf="default"))
+    # print_json(data=device.traceroute(destination="11.1.1.2",vrf = ""))
+    # print_json(data=device.traceroute(destination="21.1.1.2",ttl=5, vrf = "ip_vrf1"))
+    # print_json(data=device.get_arp_table())
+    # print_json(data=device.get_arp_table("ip_vrf1"))
+    # print_json(data=device.get_bgp_neighbors())
+    # print_json(data=device.get_bgp_neighbors_detail())
+    # print_json(data=device.get_bgp_neighbors_detail("10.1.1.2"))
+    # print_json(data=device.get_environment())
+    # print_json(data=device.get_facts())
+    # print_json(data=device.get_interfaces())
+    # print_json(data=device.get_interfaces_counters())
+    # print_json(data=device.get_interfaces_ip())
+    # print_json(data=device.get_ipv6_neighbors_table())#----------TBD
+    # print_json(data=device.get_lldp_neighbors())
+    # print_json(data=device.get_lldp_neighbors_detail())
+    # print_json(data=device.get_lldp_neighbors_detail("ethernet-1/3"))
+    # print_json(data=device.get_network_instances())
+    # print_json(data=device.get_network_instances())
+    print_json(data=device.get_users())
+    # print_json(data=device.test())