Skip to content

Dockerized build environment for Rock 5B vendor kernel & related (e.g. U-Boot) components

Notifications You must be signed in to change notification settings

milas/rock5-toolchain

Repository files navigation

Rock 5 Toolchain

Dockerized build system for Linux kernel & related (e.g. U-Boot) components for the Radxa Rock 5 series of devices

Prerequisites

  • Docker w/ buildx plugin
    • If docker buildx inspect works, you're all set!
  • amd64 or arm64 host
    • amd64 uses gcc-arm-10.3-2021.07-x86_64-aarch64-none-linux-gnu as provided by Radxa for cross-compilation (no configuration needed)

Quick Start

Run docker buildx bake from the repo root to build the Kernel and stable U-Boot.

Individual groups and targets also exist if you don't want to build everything or want to use one of the experimental targets.

Artifacts will be output to out/ in the repo root:

out
├── edk2
│   └── RK3588_NOR_FLASH.img
├── kernel
│   ├── dtb
│   │   └── rockchip
│   │       ├── overlay
│   │       ├── rk3588-rock-5b.dtb
│   │       └── rk3588-rock-5b-v11.dtb
│   ├── lib
│   │   └── modules
│   │       └── 5.10.110-gd0b0fd354269
│   └── vmlinuz
└── u-boot
    ├── collabora
    │   ├── idbloader.img
    │   ├── rk3588_spl_loader_v1.08.111.bin
    │   ├── spi
    │   │   └── spi_image.img
    │   └── u-boot.itb
    └── radxa
        ├── idbloader.img
        ├── rk3588_spl_loader_v1.08.111.bin
        ├── spi
        │   └── spi_image.img
        └── u-boot.itb

Kernel

Upstream: https://github.com/radxa/kernel/tree/linux-5.10-gen-rkr3.4

docker buildx bake kernel
out/kernel
├── dtb
│   └── rockchip
│       ├── overlay
│       ├── rk3588-rock-5b.dtb
│       └── rk3588-rock-5b-v11.dtb
├── lib
│   └── modules
│       └── 5.10.110-gd0b0fd354269
└── vmlinuz

# note: tree listing limited to three levels

Custom Kernel Config (defconfig)

You can generate a custom kernel config with the defconfig.sh script in this repo:

./defconfig.sh

This builds an image with the kernel sources and then runs make menuconfig in a container. Afterwards, the resulting configuration is copied to the current working directory as rockchip_linux_defconfig.

Then, set the DEFCONFIG environment variable to the current directory:

DEFCONFIG='.' docker buildx bake kernel

This adds your current directory as an extra context for the build. The build will then copy & use rockchip_linux_config from your current directory to be used instead of the default Radxa config.

U-Boot

The buildx u-boot group will build both the stable U-Boot from Radxa as well as the experimental build from Collabora's mainline fork.

Once the Collabora patches have been merged into upstream U-Boot, a target will be added to build directly from that and building from Collabora's fork will eventually be deprecated.

Radxa (Stable)

Upstream: https://github.com/radxa/u-boot/tree/stable-5.10-rock5

docker buildx bake u-boot-radxa
out/u-boot
└── radxa
    ├── idbloader.img
    ├── rk3588_spl_loader_v1.08.111.bin
    ├── spi
    │   └── spi_image.img
    └── u-boot.itb

Collabora (Experimental)

Upstream: https://gitlab.collabora.com/hardware-enablement/rockchip-3588/u-boot/-/tree/2023.04-rc2-rock5b

Collabora is working on upstreaming RK3588 support into mainline U-Boot. The first set of patches have been submitted as of February 2023. See details at RK3588 Mainline U-Boot Instructions.

docker buildx bake u-boot-collabora
out/u-boot
└── collabora
    ├── idbloader.img
    ├── rk3588_spl_loader_v1.08.111.bin
    ├── spi
    │   └── spi_image.img
    └── u-boot.itb

Flashing

💁 Put the device into maskrom mode before proceeding!

🐳 Replace sudo rkdeveloptool with ./rkdeveloptool-docker.sh to run via container (more details in the rkdeveloptool (via Docker) section)

First, run the bootloader to initialize the device for flashing:

sudo rkdeveloptool db ./out/rk3588_spl_loader_v1.08.111.bin

Option 1: Convenience SPI Image

The spi_image.img includes the pre-loader and U-Boot at the right offsets and is sized for the SPI chip.

docker buildx bake spl
sudo rkdeveloptool wl 0x0 ./out/u-boot/radxa/spi/spi_image.img

Option 2: Individual Components

Alternatively, you can write the individual components at their offsets.

This is helpful for non-SPI (e.g. eMMC) to avoid destroying the GPT partition table.

  1. Flash pre-loader:
    sudo rkdeveloptool wl 0x40 ./out/u-boot/idbloader.img
  2. Flash U-Boot:
    sudo rkdeveloptool wl 0x4000 ./out/u-boot/u-boot.itb

EDK2

Upstream: https://github.com/edk2-porting/edk2-rk35xx

docker buildx bake edk2
out/edk2
└── RK3588_NOR_FLASH.img

rkdeveloptool (via Docker)

Upstream: https://github.com/rockchip-linux/rkdeveloptool

This is a Dockerized build for rkdeveloptool, which can be run as a privileged container with /dev/usb bind-mounted from the host.

A helper script, rkdeveloptool-docker.sh, is provided:

./rkdeveloptool-docker.sh ld
DevNo=1 Vid=0x2207,Pid=0x350b,LocationID=704    Maskrom

The out/ directory will be bind-mounted to /out.

If you're in the repo root directory, this means you can use relative paths:

# get the latest spl loader from radxa repos 
docker buildx bake spl

# initialize the bootloader on the device in maskrom mode
./rkdeveloptool-docker.sh db ./out/rk3588_spl_loader_v1.08.111.bin

Troubleshooting

rkdeveloptool Error: Creating Comm Object failed!

Disable USB auto-suspend (run this on your host machine, not via Docker):

sudo sh -c 'echo -1 > /sys/module/usbcore/parameters/autosuspend'

NOTE: This won't be preserved across reboots.

About

Dockerized build environment for Rock 5B vendor kernel & related (e.g. U-Boot) components

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages