Skip to content

eForth version 4.3.1 for naken_asm - Tings original, but for another assembler; fixed 2 bugs, added small tools for dealing with the flash.

License

Notifications You must be signed in to change notification settings

mikalus/eForth43-msp430g2553-naken

Repository files navigation

eForth

eForth for the TI MSP430G2553 chip.
One of the few processors still available in the breadboard friendy 20 Pin DIL Package.
eForth and application will run ON this chip.

Chen-Hanson Ting, Offete Enterprises, Inc. 2015

Uses here the free Naken Assembler https://github.com/mikeakohn/naken_asm
Ported to Naken Assembler by M.Kalus, May 2018
Debuged and contribution of Flash Tools by Manfred Mahlow, Jul 2018

Contributions

430eForth43n1 ( eForth431-msp430g2553-naken.asm )

is 430eForth43 with the following extensions/modifications:

  • two tiny (hidden) Flash Tools added (FSCAN and QFLASH)
  • LITERAL and ALIGNED revealed (made visible)
  • ERASE and WRITE renamed to IERASE and IWRITE (because of a name conflict)

FSCAN Scans the Flash on COLD start and makes CP point to the start of the unused Flash area. So 430eForth43n1 behaves like a Forth in RAM until the Flash is full. Only then you have to re-flash.

QFLASH Aborts compilation with message "?flash" when the flash is full (CP >= $FFC0)

FlashTools43n1.efs

Source code file to be included in a newly flashed 430eForth43n1. Adds the words SAVE, RESET and MARKER.

SAVE ( -- ) Saves the current eForth state to the COLD start data.

RESET ( -- ) Erases the Flash Memory, resets the user variables and the reset vector and restarts eForth.

MARKER ( -- ) Creates a word . When is executed it erases itself and all later defined words from the dictionary, updates the user variables and executes SAVE.

Assembling eForth

Open a command prompt window. Change to the directory where your source code is. Type:
naken_asm -l -o eForth431-msp430g2553-naken.hex eForth431-msp430g2553-naken.asm

Have fun, mk

Try it out directly

It is easy to program eForth into the TI MSP430 Launchpad.
Download and install the free 430 version of the elprotronic programmer at
https://www.elprotronic.com/productdata;jsessionid=8FA5E1E626677AABC3683EC0D712B01F
Select the correct processor 430G2553, point to the hex file you find here:
https://github.com/mikalus/eForth43-msp430g2553-naken/blob/master/eForth43-msp430g2553-naken.hex
and follow the steps.
Do not forget RESET after programming.

Then start your favourite Terminal program and start writing short examples, like in
https://wiki.forth-ev.de/doku.php/en:projects:a-start-with-forth:start0
and there probably chapter 11c as a good starting point.

Start with Forth

Verification:

430eforth.a43
Reading Code File ........................... done
Code size = 0x1058 ( 4184 ) bytes

eForth431-msp430g2553-naken.hex
Reading Code File ........................... done Code size = 0x10B8 ( 4280 ) bytes

The eForth431-msp430g2553-naken.hex image differs from the original 430eforth.a43 file. A code-block had to be put to an end position, 2 bugs fixed, tiny tools added. Original eForth WORDS are the same. See: screenshots of old (CCS) and new (naken) version.
WORDS .S and some compiling are ok.

Why Version 4.3.1 ?

430eForth43 (n) has the serious shortcoming of the reset trap. Curious, be it beginners or professionals, quickly fall in without suspecting what's going on there. They usually do not know anything about
' HI APP!
Their experience: again a software that does not work properly. Or worse, keep away from Forth. :-( Therefore, there is the version 43n1 without reset trap. You can work with it like with Forth in RAM until the flash is full. Then there is the error message "? Flash". The interpreter still works, but compiling is no longer possible, again the error message. You have to re-flash. Otherwise, 43n1 behaves like 43 (n), so also fits to Jürgen's books and will also work fully with the IDE as described.

Those interested should use the newer version 43n1.

Background knowledge on the reset trap:
Vierte Dimension 3/2017, "Das RAM–ROM–Dilemma von interaktivem Forth in kleinen MCUs", Michael Kalus.
https://wiki.forth-ev.de/lib/exe/fetch.php/vd-archiv:4d2017-03.pdf
https://wiki.forth-ev.de/lib/exe/fetch.php/events:430eforth-tips_tools_tests2017.pdf

To Do

Discard input stream if an error occurs.

19 May 2018 (finis)

About

eForth version 4.3.1 for naken_asm - Tings original, but for another assembler; fixed 2 bugs, added small tools for dealing with the flash.

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published