Support M5 core2、corebasic2.7+Module-LoRa433_V1.1+GNSS Module #4471
Conversation
|
|
|
The M9N is not specifically supported, but should work. There are some fiddly bits in the VALSET/VALGET config that could use some work. It's on the list... The M9N is an expensive solution that could be better addressed with an M10 or F10 device. But I guess that was not your choice, but M5Stacks. |
|
@GPSFan Indeed, at present, I am making adaptation for the convenience of users, and I am also trying to use the gps atgm336h series to replace it |
|
@armisis This one is to start the sound prompt, and then start to load the interface, not restart, maybe you can look at the log |
|
I will look into the log, I have the original core and the 1.1 lora with
the GPS module plugged in, I just know every time that device starts it
makes a horrible noise right now, Im tempted to find the speaker and
"disable" it for good, if it cannot be done via software. (I could never
get the 1.1 lora to work at all on my core2 or core3 devices)
…On Fri, Aug 16, 2024 at 11:10 AM petrel ***@***.***> wrote:
@armisis <https://github.com/armisis> This one is to start the sound
prompt, and then start to load the interface, not restart, maybe you can
look at the log
—
Reply to this email directly, view it on GitHub
<#4471 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AEVF3FLUCF4BBTFUG3BVFL3ZRXFZTAVCNFSM6AAAAABMTGM536VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEOJTGIZDSOJQG4>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
|
@armisis You can annotate this macro definition #define PIN_BUZZER 25 in the variant.h file, and annotate M5.Speaker.tone, so that the buzzer will not start. Still working on it。For core2, I have been adapting, and for cores3, I have found that there is spi conflict between lora and lcd, which is still being solved |
|
Thank you! Will standby, always ready to test, (I have not coded anything
since basic and pascal, other than bash scripts, so i stick to testing and
playing with SDR)
Thanks and best regards!
…On Fri, Aug 16, 2024 at 11:25 AM petrel ***@***.***> wrote:
@armisis <https://github.com/armisis> You can annotate this macro
definition #define PIN_BUZZER 25 in the variant.h file, and annotate
M5.Speaker.tone, so that the buzzer will not start. Still working on it。For
core2, I have been adapting, and for cores3, I have found that there is spi
conflict between lora and lcd, which is still being solved
—
Reply to this email directly, view it on GitHub
<#4471 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AEVF3FIK7TWMHVBWUJHW2QDZRXHSVAVCNFSM6AAAAABMTGM536VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEOJTGI2TCMRTHA>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
weekroom
changed the title
|
Please run |
|
@caveman99 Hello, at present I am on Windows, can compile and burn normally, may I ask you what is the problem |
|
@weekroom , trunk refers to: https://docs.trunk.io/code-quality - it's a code linter. |
|
@weekroom Alternatively, you can use GitPod: https://gitpod.io#https://github.com/m5stack/meshtastic-firmware |
|
@weekroom Do you have a problem with trunk? |
|
I have tried to write touches in ButtonThread.cpp file successfully, did you report any errors, I remember core2 or corev1.1 were successful
…________________________________
发件人: Ludovic BOUé ***@***.***>
发送时间: 2024年11月16日 4:35
收件人: meshtastic/firmware ***@***.***>
抄送: Huang Junrong ***@***.***>; Mention ***@***.***>
主题: Re: [meshtastic/firmware] Support M5 core2、corebasic2.7+Module-LoRa433_V1.1+GNSS Module (PR #4471)
[External: This email originated outside Espressif]
@weekroom<https://github.com/weekroom> I tested the code proposed here and was unable to get the touch controller to work.
―
Reply to this email directly, view it on GitHub<#4471 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AMHDIC5Z2WKSKOQU4DSDK3D2AZLKNAVCNFSM6AAAAABMTGM536VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINZZHA3TIOJQGU>.
You are receiving this because you were mentioned.Message ID: ***@***.***>
|
At present, I have other priorities on hand, so I have no time to re-verify and update, sorry |
I am developing with M5 Core Basic V2.7 as the host, along with the LoRa Module (Module-LORA433_V1.1) and the GPS Module (GNSS Module), in a stacked design for ease of use. Interface Added the interface display of LORA-related data。