This repository is warehouse of my keyboard architecture.
Release firmware
Keymap editing web service REMAP
Note that for these keyboards, the design is older and also less likely to support the latest firmware and architecture.
Also, KICAD files may be incomplete, they are not going to be perfect.
The Rhymestone is 40-key (40%) ortholinear keyboard. It is based on The crkbd and The Helix keyboard. Thank you so much makoto kurauchi-san and foostan-san.😊
Build guide
Firmware
Hardware data
rev1
rev2
The Treadstone48 is 47 or 48-key (50%) Symmetric staggered keyboard. It is based on the Rhymestone. Therefore, The Rhymestone can connect to the Treadstone48 as Numpad or lefthand keyboard. (rev1 only)
This Symmetrical Staggered is designed to be easy to use in a natural posture and easy for your fingers to reach.
And more one topic, this key arrangement can use general ansi 104 keycaps.
Build guide
Build guide (En)
Firmware
Hardware data
About Treadstone48
Case design sample
The Stonehenge30 is 30-key (30%) Symmetric staggered keyboard. It is based on the Treadstone48. And it is thumb-less (not use thumb) keyboard of prototype.
Build guide
Firmware
Hardware data
About Stonehenge30
Case design sample
rev1
lite
The Treadstone32 is 32-key (30%) Symmetric staggered keyboard. It is based on the Treadstone48 and the Stonehenge30.
This keyboard is removing dedicated modifire-key from the Treadstone48 for more compact. But 2 thumb-key is left same as Treadtone48.
Build guide (lite)
Build guide
Build guide (En)
Firmware
Hardware data
About Treadstone32
The Treadstone60 is 59-62key (60%) Symmetric staggered keyboard. It is based on the Treadstone48 and the Treadstone32.
The Leftover30 is 34-36key (30%) Row staggered keyboard. This project was created by marksard, yohewi and hdbx.