Skip to content
You're viewing an older version of this GitHub Action. Do you want to see the latest version instead?
umbrella

GitHub Action

Python Coverage Comment

v3.11

Python Coverage Comment

umbrella

Python Coverage Comment

Publish diff coverage report as PR comment, and create a coverage badge to display on the readme.

Installation

Copy and paste the following snippet into your .yml file.

 
              
- name: Python Coverage Comment

              
  uses: py-cov-action/[email protected]
Learn more about this action in py-cov-action/python-coverage-comment-action

Choose a version

GitHub Action: Python Coverage Comment

Coverage badge

Presentation

Publish diff coverage report as PR comment, create a coverage badge to display on the readme, and a browsable HTML coverage report (hosted in a dedicated branch of the repository)

See this action in action

What does it do?

This action operates on an already generated .coverage file from coverage.

It has two main modes of operation:

PR mode

On PRs, it will analyze the .coverage file, and produce a comment that will be posted to the PR. If a comment had already previously be written, it will be updated. The comment contains information on the evolution of coverage rate attributed to this PR, as well as the rate of coverage for lines that this PR introduces. There's also a small analysis for each file in a collapsed block.

This comment will also be output as a job summary.

See an example.

Default branch mode

On repository's default branch, it will extract the coverage rate and create files that will be stored on a dedicated independent branch in your repository.

These files include:

  • a svg badge to include in your README
  • a json file that can be used by shields.io if your repository is public to customize the look of your badge
  • Another json file used internally by the action to report on coverage evolution (does a PR make the coverage go up or down?)
  • A short file-by-file coverage report embedded directly into the branch's README. An excerpt from this is also output directly as a job summary.
  • The full HTML coverage report and links to make this report browsable

See an example

Usage

Setup

Please ensure that your .coverage file(s) is created with the option relative_files = true.

Please ensure that the branch python-coverage-comment-action-data is not protected (there's no reason that it would be the case, except if you have very specific wildcard rules). If it is, either adjust your rules, or set the COVERAGE_DATA_BRANCH parameter as described below. GitHub Actions will create this branch with initial data at the first run if it doesn't exist, and will independently commit to that branch after each commit to your default branch.

Badge

Once the action has run on your default branch, all the details for how to integrate the badge to your Readme will be displayed in:

  • The Readme of the python-coverage-comment-action-data branch
  • The text output of the workflow run

Basic usage

The following snippet is targetted for cases where you expect PRs from users that don't have write access to the repository. Posting the comment is done in 2 steps:

  1. Checkout the repository and generate the comment to be posted. For security reasons, we don't want to give permissions to a workflow that checks out untrusted code
  2. From a trusted workflow, publish the comment on the PR
# .github/workflows/ci.yml
name: CI

on:
  pull_request:
  push:
    branches:
      - "main"

jobs:
  test:
    name: Run tests & display coverage
    runs-on: ubuntu-latest
    permissions:
      # Gives the action the necessary permissions for publishing new
      # comments in pull requests.
      pull-requests: write
      # Gives the action the necessary permissions for pushing data to the
      # python-coverage-comment-action branch, and for editing existing
      # comments (to avoid publishing multiple comments in the same PR)
      contents: write
    steps:
      - uses: actions/checkout@v4

      - name: Install everything, run the tests, produce the .coverage file
        run: make test # This is the part where you put your own test command

      - name: Coverage comment
        id: coverage_comment
        uses: py-cov-action/python-coverage-comment-action@v3
        with:
          GITHUB_TOKEN: ${{ github.token }}

      - name: Store Pull Request comment to be posted
        uses: actions/upload-artifact@v3
        if: steps.coverage_comment.outputs.COMMENT_FILE_WRITTEN == 'true'
        with:
          # If you use a different name, update COMMENT_ARTIFACT_NAME accordingly
          name: python-coverage-comment-action
          # If you use a different name, update COMMENT_FILENAME accordingly
          path: python-coverage-comment-action.txt
# .github/workflows/coverage.yml
name: Post coverage comment

on:
  workflow_run:
    workflows: ["CI"]
    types:
      - completed

jobs:
  test:
    name: Run tests & display coverage
    runs-on: ubuntu-latest
    if: github.event.workflow_run.event == 'pull_request' && github.event.workflow_run.conclusion == 'success'
    permissions:
      # Gives the action the necessary permissions for publishing new
      # comments in pull requests.
      pull-requests: write
      # Gives the action the necessary permissions for editing existing
      # comments (to avoid publishing multiple comments in the same PR)
      contents: write
      # Gives the action the necessary permissions for looking up the
      # workflow that launched this workflow, and download the related
      # artifact that contains the comment to be published
      actions: read
    steps:
      # DO NOT run actions/checkout here, for security reasons
      # For details, refer to https://securitylab.github.com/research/github-actions-preventing-pwn-requests/
      - name: Post comment
        uses: py-cov-action/python-coverage-comment-action@v3
        with:
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
          GITHUB_PR_RUN_ID: ${{ github.event.workflow_run.id }}
          # Update those if you changed the default values:
          # COMMENT_ARTIFACT_NAME: python-coverage-comment-action
          # COMMENT_FILENAME: python-coverage-comment-action.txt

Basic usage without external contributors

If you don't expect external contributors, you don't need all the shenanigans with the artifacts and the 2nd workflow. This is likely to be the most straightforward way to configure it for private repositories. It might look like this:

# .github/workflows/ci.yml
name: CI

on:
  pull_request:
  push:
    branches:
      - "main"

jobs:
  test:
    name: Run tests & display coverage
    runs-on: ubuntu-latest
    permissions:
      # Gives the action the necessary permissions for publishing new
      # comments in pull requests.
      pull-requests: write
      # Gives the action the necessary permissions for pushing data to the
      # python-coverage-comment-action branch, and for editing existing
      # comments (to avoid publishing multiple comments in the same PR)
      contents: write
    steps:
      - uses: actions/checkout@v4

      - name: Install everything, run the tests, produce the .coverage file
        run: make test # This is the part where you put your own test command

      - name: Coverage comment
        uses: py-cov-action/python-coverage-comment-action@v3
        with:
          GITHUB_TOKEN: ${{ github.token }}

Merging multiple coverage reports

In case you have a job matrix and you want the report to be on the global coverage, you can configure your ci.yml like this (coverage.yml remains the same)

name: CI

on:
  pull_request:
  push:
    branches:
      - "master"
    tags:
      - "*"

jobs:
  build:
    strategy:
      matrix:
        include:
          - python_version: "3.7"
          - python_version: "3.8"
          - python_version: "3.9"
          - python_version: "3.10"

    name: "Python ${{ matrix.python_version }}"
    runs-on: ubuntu-latest

    steps:
      - uses: actions/checkout@v4

      - name: Set up Python
        id: setup-python
        uses: actions/setup-python@v4
        with:
          python-version: ${{ matrix.python_version }}

      - name: Install everything, run the tests, produce a .coverage.xxx file
        run: make test # This is the part where you put your own test command
        env:
          COVERAGE_FILE: ".coverage.${{ matrix.python_version }}"
          # Alternatively you can run coverage with the --parallel flag or add
          # `parallel = True` in the coverage config file.
          # If using pytest-cov, you can also add the `--cov-append` flag
          # directly or through PYTEST_ADD_OPTS.

      - name: Store coverage file
        uses: actions/upload-artifact@v3
        with:
          name: coverage
          path: .coverage.${{ matrix.python_version }}

  coverage:
    name: Coverage
    runs-on: ubuntu-latest
    needs: build
    permissions:
      pull-requests: write
      contents: write
    steps:
      - uses: actions/checkout@v4

      - uses: actions/download-artifact@v3
        id: download
        with:
          name: "coverage"

      - name: Coverage comment
        id: coverage_comment
        uses: py-cov-action/python-coverage-comment-action@v3
        with:
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
          MERGE_COVERAGE_FILES: true

      - name: Store Pull Request comment to be posted
        uses: actions/upload-artifact@v3
        if: steps.coverage_comment.outputs.COMMENT_FILE_WRITTEN == 'true'
        with:
          name: python-coverage-comment-action
          path: python-coverage-comment-action.txt

All options

- name: Display coverage
  id: coverage_comment
  uses: py-cov-action/python-coverage-comment-action@v3
  with:
    GITHUB_TOKEN: ${{ github.token }}

    # Only necessary in the "workflow_run" workflow.
    GITHUB_PR_RUN_ID: ${{ inputs.GITHUB_PR_RUN_ID }}

    # Use this in case the folder to run coverage commands from is not the
    # top level of your repository
    COVERAGE_PATH: my_project/

    # If the coverage percentage is above or equal to this value, the badge will be green.
    MINIMUM_GREEN: 100

    # Same with orange. Below is red.
    MINIMUM_ORANGE: 70

    # If true, will run `coverage combine` before reading the `.coverage` file.
    MERGE_COVERAGE_FILES: false

    # If true, will create an annotation on every line with missing coverage on a pull request.
    ANNOTATE_MISSING_LINES: false

    # Only needed if ANNOTATE_MISSING_LINES is set to true. This parameter allows you to choose between
    # notice, warning and error as annotation type. For more information look here:
    # https://docs.github.com/en/actions/using-workflows/workflow-commands-for-github-actions#setting-a-notice-message
    ANNOTATION_TYPE: warning

    # Name of the artifact in which the body of the comment to post on the PR is stored.
    # You typically don't have to change this unless you're already using this name for something else.
    COMMENT_ARTIFACT_NAME: python-coverage-comment-action

    # Name of the file in which the body of the comment to post on the PR is stored.
    # In monorepo setting, see SUBPROJECT_ID.
    COMMENT_FILENAME: python-coverage-comment-action.txt

    # This setting is only necessary if you plan to run the action multiple times
    # in the same repository. It will be appended to the value of all the
    # settings that need to be unique, so as for the action to avoid mixing
    # up results of multiple runs.
    # Affects `COMMENT_FILENAME`, `COVERAGE_DATA_BRANCH`.
    # Ideally, use dashes (`-`) rather than underscrores (`_`) to split words,
    # for consistency
    SUBPROJECT_ID: null / "lib-name"

    # An alternative template for the comment for pull requests. See details below.
    COMMENT_TEMPLATE: The coverage rate is `{{ coverage.info.percent_covered | pct }}`{{ marker }}

    # Name of the branch in which coverage data will be stored on the repository.
    # Default is 'python-coverage-comment-action-data'. Please make sure that this
    # branch is not protected.
    # In monorepo setting, see SUBPROJECT_ID.
    COVERAGE_DATA_BRANCH: python-coverage-comment-action-data

    # Deprecated, see https://docs.github.com/en/actions/monitoring-and-troubleshooting-workflows/enabling-debug-logging
    VERBOSE: false

Overriding the template

By default, comments are generated from a Jinja template that you can read here.

If you want to change this template, you can set COMMENT_TEMPLATE. This is an advanced usage, so you're likely to run into more road bumps.

You will need to follow some rules for your template to be valid:

  • Your template needs to be syntactically correct with Jinja2 rules
  • You may define a new template from scratch, but in this case you are required to include {{ marker }}, which includes an HTML comment (invisible on GitHub) that the action uses to identify its own comments.
  • If you'd rather want to change parts of the default template, you can do so by starting your comment with {% extends "base" %}, and then override the blocks ({% block foo %}) that you wish to change. If you're unsure how it works, see the Jinja documentation
  • In either case, you will most likely want to get yourself familiar with the available context variables, the best is to read the code from here. Should those variables change, we'll do our best to bump the action's major version.

Examples

In the first example, we change the emoji that illustrates coverage going down from :down_arrow: to :sob::

{% extends "base" %}
{% block emoji_coverage_down %}:sob:{% endblock emoji_coverage_down %}

In this second example, we replace the whole comment by something much shorter with the coverage (percentage) of the whole project from the PR build:

"Coverage: {{ coverage.info.percent_covered | pct }}{{ marker }}"

Monorepo setting

In case you want to use the action multiple times with different parts of your source (so you have multiple codebases into a single repo), you'll need to use SUBPROJECT_ID with a different value for each launch. You may still use the same step for storing all files as artifacts. You'll end up with a different comment for each launch. Feel free to use the COMMENT_TEMPLATE if you want each comment to clearly state what it relates to.

# .github/workflows/ci.yml
name: CI

on:
  pull_request:
  push:
    branches:
      - "main"

jobs:
  test:
    name: Run tests & display coverage
    runs-on: ubuntu-latest
    permissions:
      pull-requests: write
      contents: write
    steps:
      - uses: actions/checkout@v3

      - name: Test project 1
        run: make -C project_1 test

      - name: Test project 2
        run: make -C project_2 test

      - name: Coverage comment (project 1)
        id: coverage_comment_1
        uses: py-cov-action/python-coverage-comment-action@v3
        with:
          COVERAGE_PATH: project_1
          SUBPROJECT_ID: project-1
          GITHUB_TOKEN: ${{ github.token }}

      - name: Coverage comment (project 2)
        id: coverage_comment_2
        uses: py-cov-action/python-coverage-comment-action@v3
        with:
          COVERAGE_PATH: project_2/src
          SUBPROJECT_ID: project-2
          GITHUB_TOKEN: ${{ github.token }}

      - name: Store Pull Request comment to be posted
        uses: actions/upload-artifact@v3
        if: steps.coverage_comment_1.outputs.COMMENT_FILE_WRITTEN == 'true' || steps.coverage_comment_2.outputs.COMMENT_FILE_WRITTEN == 'true'
        with:
          name: python-coverage-comment-action
          # Note the star
          path: python-coverage-comment-action*.txt
# .github/workflows/coverage.yml
name: Post coverage comment

on:
  workflow_run:
    workflows: ["CI"]
    types:
      - completed

jobs:
  test:
    name: Run tests & display coverage
    runs-on: ubuntu-latest
    if: github.event.workflow_run.event == 'pull_request' && github.event.workflow_run.conclusion == 'success'
    permissions:
      pull-requests: write
      contents: write
      actions: read
    steps:
      - name: Post comment
        uses: py-cov-action/python-coverage-comment-action@v3
        with:
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
          GITHUB_PR_RUN_ID: ${{ github.event.workflow_run.id }}
          SUBPROJECT_ID: project-1
          COVERAGE_PATH: project_1

      - name: Post comment
        uses: py-cov-action/python-coverage-comment-action@v3
        with:
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
          GITHUB_PR_RUN_ID: ${{ github.event.workflow_run.id }}
          SUBPROJECT_ID: project-2
          COVERAGE_PATH: project_2/src

Other topics

Pinning

On the examples above, the version was set to the tag v3. Pinning to a major version will give you the latest release on this version. (Note that we release everytime after a PR is merged). Pinning to a specific version (v3.1 for example) would make the action more reproducible, though you'd have to update it regularly (e.g. using Dependabot). You can also pin a commit hash if you want to be 100% sure of what you run, given that tags are mutable. Finally, You can also decide to pin to main, if you're ok with the action maybe breaking when (if) we release a v4.

Note on the state of this action

This action is tested with 100% coverage. That said, coverage isn't all, and there may be a lot of remaining issues :)

We accept Pull Requests (for bug fixes and previously-discussed features), and bug reports. For feature requests, this might depend on how much time we have on our hands at the moment, and how well you manage to sell it but don't get your hopes too high.

Generic coverage

Initially, the first iteration of this action was using the more generic coverage.xml (Cobertura) in order to be language independent. It was later discovered that this format is very badly specified, as are mostly all coverage formats. For this reason, we switched to the much more specialized .coverage file that is only produced for Python projects (also, the action was rewritten from the ground up). Because this would likely completely break compatibility, a brand new action (this action) was created.

You can find the (unmaintained) language-generic version here.

Why do we need relative_files = true ?

Yes, I agree, this is annoying! The reason is that by default, coverage writes the full path to the file in the .coverage file, but the path is most likely different between the moment where your coverage is generated (in your workflow) and the moment where the report is computed (in the action, which runs inside a docker).

I swear I saw something about a wiki somewhere?

A previous version of this action did things with the wiki. This is not the case anymore.

.coverage file generated on a Windows file system

If your project's coverage was built on Windows, you may get an error like:

CoverageWarning: Couldn't parse 'yourproject\__init__.py': No source for code: 'yourproject\__init__.py'. (couldnt-parse)

This is likely due to coverage being confused with the coverage being computed with \ but read with /. You can most probably fix it with the following in your coverage configuration:

[paths]
source =
    */project/module
    *\project\module

Private repositories

This action is supposedly compatible with private repository. Just make sure to use the svg badge directly, and not the shields.io URL.

Upgrading from v2 to v3

  • When upgrading, we change the location and format where the coverage data is kept. Pull request that have not been rebased may be displaying slightly wrong information.