Skip to content
This repository has been archived by the owner on Aug 5, 2024. It is now read-only.

Commit

Permalink
update readme
Browse files Browse the repository at this point in the history
  • Loading branch information
@macdylan
macdylan committed Jan 7, 2024
1 parent 2e9b8d5 commit 8d6aaec
Show file tree
Hide file tree
Showing 11 changed files with 268 additions and 263 deletions.
2 changes: 1 addition & 1 deletion OrcaSlicer/Snapmaker/machine/fdm_a250.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -15,6 +15,6 @@
"0x250"
],
"machine_start_gcode": "; Model: Snapmaker A250\n; Update: 20231019\n; Maintained by https://github.com/macdylan/3dp-configs\n; Printer : [printer_preset]\n; Profile : [print_preset]\n; Plate : [plate_name]\n\nT[initial_extruder]\n\nM140 S{first_layer_bed_temperature[initial_extruder]}\n\n; you can clean the nozzle\nM104 S165\nM204 S100\nG28\nG0 Z156 F960.0\nG0 Y125.0 F3420.0\nG0 X115.0\n\nM190 R{first_layer_bed_temperature[initial_extruder]}\n\nG28\nG0 X0\nG0 Z0.2 F960.0\nG0 Y0 F3420.0\nG0 X230\nG0 Y250\nG0 X0\nG0 Y0\n\nM83\n\nT[initial_extruder]\nG0 Z20 F960.0\nG0 X{if initial_extruder == 0}-10{else}240{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, nozzle_temperature_initial_layer[initial_extruder] + 15))} C2 W1; common flush temp\nG0 E35 F80.0\n\nM106 S{min(255, (fan_max_speed[initial_extruder] + 10) * 2.55)}\nM104 S{nozzle_temperature_initial_layer[initial_extruder] + 5}\n\nG0 E35 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if initial_extruder == 0}10{else}220{endif} F3420.0\nG0 X{if initial_extruder == 0}-10{else}240{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{nozzle_temperature_initial_layer[initial_extruder]} C3 W1\nG1 X{if initial_extruder == 0}105.0{else}125.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if initial_extruder == 0}0{else}230{endif} E6.54809 F3420.0\nG1 Y11 E0.68599\nG1 X{if initial_extruder == 0}0.5{else}229.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if initial_extruder == 0}9.5{else}220.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n; ready [plate_name]",
"machine_end_gcode": "G92 E0\n\nG0 Z{max_layer_z + 0.5} F600\n; retract the filament to make it easier to replace\nG0 E-25 F200\nG28\n\n M104 S0\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;",
"machine_end_gcode": "G92 E0\n\nG0 Z{max_layer_z + 2.0} F600\n; retract the filament to make it easier to replace\nG0 E-25 F200\nG28\n\n M104 S0\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;",
"before_layer_change_gcode": "; layer_num: [layer_num]\nG92 E0"
}
2 changes: 1 addition & 1 deletion OrcaSlicer/Snapmaker/machine/fdm_a250_dual.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -15,7 +15,7 @@
"0x250"
],
"machine_start_gcode": "; Model: Snapmaker A250 Dual ({nozzle_diameter[0]}/{nozzle_diameter[1]})\n; Update: 20231019\n; Maintained by https://github.com/macdylan/3dp-configs\n; Printer : [printer_preset]\n; Profile : [print_preset]\n; Plate : [plate_name]\n; --- initial_extruder: [initial_extruder]\n; --- has_wipe_tower: [has_wipe_tower]\n; --- total_toolchanges: [total_toolchanges]\n; --- T0: {is_extruder_used[0]}\n; --- T1: {is_extruder_used[1]}\n\nT[initial_extruder]\n\nM140 S{first_layer_bed_temperature[initial_extruder]}\n\n; you can clean the nozzle\n{if is_extruder_used[0]}M104 T0 S165{endif}\n{if is_extruder_used[1]}M104 T1 S165{endif}\nM204 S100\nG28\nG0 Z136 F960.0\nG0 Y125.0 F3420.0\nG0 X115.0\n\nM190 R{first_layer_bed_temperature[initial_extruder]}\n\nG28\nG0 X0\nG0 Z0.2 F960.0\nG0 Y0 F3420.0\nG0 X230\nG0 Y250\nG0 X0\nG0 Y0\n\nM83\n\n{if is_extruder_used[0]}M104 T0 S{max(250, min(290, nozzle_temperature_initial_layer[0] + 15))}{endif}\n{if is_extruder_used[1]}M104 T1 S{max(250, min(290, nozzle_temperature_initial_layer[1] + 15))}{endif}\n\n{if is_extruder_used[0] and initial_extruder != 0}\n T0\nG0 Z20 F960.0\nG0 X{if 0 == 0}-10{else}240{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, nozzle_temperature_initial_layer[0] + 15))} C2 W1; common flush temp\nG0 E45 F80.0\n\nM106 S{min(255, (fan_max_speed[0] + 10) * 2.55)}\nM104 S{nozzle_temperature_initial_layer[0] + 5}\n\nG0 E45 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if 0 == 0}10{else}220{endif} F3420.0\nG0 X{if 0 == 0}-10{else}240{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{nozzle_temperature_initial_layer[0]} C3 W1\nG1 X{if 0 == 0}105.0{else}125.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if 0 == 0}0{else}230{endif} E6.54809 F3420.0\nG1 Y11 E0.68599\nG1 X{if 0 == 0}0.5{else}229.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if 0 == 0}9.5{else}220.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n M104 S{temperature_vitrification[0]}\n{endif}\n{if is_extruder_used[1] and initial_extruder != 1}\n T1\nG0 Z20 F960.0\nG0 X{if 1 == 0}-10{else}240{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, nozzle_temperature_initial_layer[1] + 15))} C2 W1; common flush temp\nG0 E45 F80.0\n\nM106 S{min(255, (fan_max_speed[1] + 10) * 2.55)}\nM104 S{nozzle_temperature_initial_layer[1] + 5}\n\nG0 E45 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if 1 == 0}10{else}220{endif} F3420.0\nG0 X{if 1 == 0}-10{else}240{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{nozzle_temperature_initial_layer[1]} C3 W1\nG1 X{if 1 == 0}105.0{else}125.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if 1 == 0}0{else}230{endif} E6.54809 F3420.0\nG1 Y11 E0.68599\nG1 X{if 1 == 0}0.5{else}229.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if 1 == 0}9.5{else}220.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n M104 S{temperature_vitrification[1]}\n{endif}\n\nT[initial_extruder]\nG0 Z20 F960.0\nG0 X{if initial_extruder == 0}-10{else}240{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, nozzle_temperature_initial_layer[initial_extruder] + 15))} C2 W1; common flush temp\nG0 E45 F80.0\n\nM106 S{min(255, (fan_max_speed[initial_extruder] + 10) * 2.55)}\nM104 S{nozzle_temperature_initial_layer[initial_extruder] + 5}\n\nG0 E45 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if initial_extruder == 0}10{else}220{endif} F3420.0\nG0 X{if initial_extruder == 0}-10{else}240{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{nozzle_temperature_initial_layer[initial_extruder]} C3 W1\nG1 X{if initial_extruder == 0}105.0{else}125.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if initial_extruder == 0}0{else}230{endif} E6.54809 F3420.0\nG1 Y11 E0.68599\nG1 X{if initial_extruder == 0}0.5{else}229.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if initial_extruder == 0}9.5{else}220.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n; ready [plate_name]",
"machine_end_gcode": "G92 E0\n\nG0 Z{max_layer_z + 0.5} F600\n; retract the filament to make it easier to replace\nG0 E-35 F200\nG28\n\n {if is_extruder_used[0]}M104 T0 S0{endif}\n {if is_extruder_used[1]}M104 T1 S0{endif}\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;",
"machine_end_gcode": "G92 E0\n\nG0 Z{max_layer_z + 2.0} F600\n; retract the filament to make it easier to replace\nG0 E-35 F200\nG28\n\n {if is_extruder_used[0]}M104 T0 S0{endif}\n {if is_extruder_used[1]}M104 T1 S0{endif}\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;",
"change_filament_gcode": ";***** Update: 20230923\n{if current_extruder != next_extruder}\n; Change T[current_extruder] -> T[next_extruder] (layer [layer_num]\n; layer\nT{next_extruder}\n\nM107 P[current_extruder] ;fan off T[current_extruder]\nM104 T[current_extruder] S{temperature_vitrification[current_extruder]} ;standby T[current_extruder]\n\n{if layer_num == 1 &&\n ((filament_type[current_extruder] == \"PLA\" || filament_type[current_extruder] == \"TPU\")\n || (filament_type[next_extruder] == \"PLA\" || filament_type[next_extruder] == \"TPU\"))\n}\n ; set bed temp: {filament_type[current_extruder]}({bed_temperature[current_extruder]}) -> {filament_type[next_extruder]}({bed_temperature[next_extruder]})\n M140 S{min(bed_temperature[current_extruder], bed_temperature[next_extruder])}\n{endif}\n\nM109 T[next_extruder] S{if layer_num < 1}[nozzle_temperature_initial_layer]{else}[nozzle_temperature]{endif} C3 W1 ;wait T[next_extruder]\n{if layer_num == 1}\n G1 E{retraction_length[next_extruder]} F2000;deretract\n{endif}\n{if layer_z > first_layer_height && layer_num >= close_fan_the_first_x_layers[next_extruder]}\n; M106 P[next_extruder] S{fan_min_speed[next_extruder] * 255.0 / 100.0} ;restore fan speed for T[next_extruder]\n{endif}\n; End Toolchange\n{endif}",
"before_layer_change_gcode": "; layer_num: [layer_num]\nG92 E0"
}
2 changes: 1 addition & 1 deletion OrcaSlicer/Snapmaker/machine/fdm_a350.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -15,6 +15,6 @@
"0x350"
],
"machine_start_gcode": "; Model: Snapmaker A350\n; Update: 20231019\n; Maintained by https://github.com/macdylan/3dp-configs\n; Printer : [printer_preset]\n; Profile : [print_preset]\n; Plate : [plate_name]\n\nT[initial_extruder]\n\nM140 S{first_layer_bed_temperature[initial_extruder]}\n\n; you can clean the nozzle\nM104 S165\nM204 S100\nG28\nG0 Z220 F960.0\nG0 Y175.0 F3420.0\nG0 X160.0\n\nM190 R{first_layer_bed_temperature[initial_extruder]}\n\nG28\nG0 X0\nG0 Z0.2 F960.0\nG0 Y0 F3420.0\nG0 X320\nG0 Y350\nG0 X0\nG0 Y0\n\nM83\n\nT[initial_extruder]\nG0 Z20 F960.0\nG0 X{if initial_extruder == 0}-10{else}330{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, nozzle_temperature_initial_layer[initial_extruder] + 15))} C2 W1; common flush temp\nG0 E35 F80.0\n\nM106 S{min(255, (fan_max_speed[initial_extruder] + 10) * 2.55)}\nM104 S{nozzle_temperature_initial_layer[initial_extruder] + 5}\n\nG0 E35 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if initial_extruder == 0}10{else}310{endif} F3420.0\nG0 X{if initial_extruder == 0}-10{else}330{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{nozzle_temperature_initial_layer[initial_extruder]} C3 W1\nG1 X{if initial_extruder == 0}150.0{else}170.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if initial_extruder == 0}0{else}320{endif} E9.35442 F3420.0\nG1 Y11 E0.68599\nG1 X{if initial_extruder == 0}0.5{else}319.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if initial_extruder == 0}9.5{else}310.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n; ready [plate_name]",
"machine_end_gcode": "G92 E0\n\nG0 Z{max_layer_z + 0.5} F600\n; retract the filament to make it easier to replace\nG0 E-25 F200\nG28\n\n M104 S0\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;",
"machine_end_gcode": "G92 E0\n\nG0 Z{max_layer_z + 2.0} F600\n; retract the filament to make it easier to replace\nG0 E-25 F200\nG28\n\n M104 S0\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;",
"before_layer_change_gcode": "; layer_num: [layer_num]\nG92 E0"
}
2 changes: 1 addition & 1 deletion OrcaSlicer/Snapmaker/machine/fdm_a350_dual.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -15,7 +15,7 @@
"0x350"
],
"machine_start_gcode": "; Model: Snapmaker A350 Dual ({nozzle_diameter[0]}/{nozzle_diameter[1]})\n; Update: 20231019\n; Maintained by https://github.com/macdylan/3dp-configs\n; Printer : [printer_preset]\n; Profile : [print_preset]\n; Plate : [plate_name]\n; --- initial_extruder: [initial_extruder]\n; --- has_wipe_tower: [has_wipe_tower]\n; --- total_toolchanges: [total_toolchanges]\n; --- T0: {is_extruder_used[0]}\n; --- T1: {is_extruder_used[1]}\n\nT[initial_extruder]\n\nM140 S{first_layer_bed_temperature[initial_extruder]}\n\n; you can clean the nozzle\n{if is_extruder_used[0]}M104 T0 S165{endif}\n{if is_extruder_used[1]}M104 T1 S165{endif}\nM204 S100\nG28\nG0 Z193 F960.0\nG0 Y175.0 F3420.0\nG0 X160.0\n\nM190 R{first_layer_bed_temperature[initial_extruder]}\n\nG28\nG0 X0\nG0 Z0.2 F960.0\nG0 Y0 F3420.0\nG0 X320\nG0 Y350\nG0 X0\nG0 Y0\n\nM83\n\n{if is_extruder_used[0]}M104 T0 S{max(250, min(290, nozzle_temperature_initial_layer[0] + 15))}{endif}\n{if is_extruder_used[1]}M104 T1 S{max(250, min(290, nozzle_temperature_initial_layer[1] + 15))}{endif}\n\n{if is_extruder_used[0] and initial_extruder != 0}\n T0\nG0 Z20 F960.0\nG0 X{if 0 == 0}-10{else}330{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, nozzle_temperature_initial_layer[0] + 15))} C2 W1; common flush temp\nG0 E45 F80.0\n\nM106 S{min(255, (fan_max_speed[0] + 10) * 2.55)}\nM104 S{nozzle_temperature_initial_layer[0] + 5}\n\nG0 E45 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if 0 == 0}10{else}310{endif} F3420.0\nG0 X{if 0 == 0}-10{else}330{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{nozzle_temperature_initial_layer[0]} C3 W1\nG1 X{if 0 == 0}150.0{else}170.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if 0 == 0}0{else}320{endif} E9.35442 F3420.0\nG1 Y11 E0.68599\nG1 X{if 0 == 0}0.5{else}319.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if 0 == 0}9.5{else}310.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n M104 S{temperature_vitrification[0]}\n{endif}\n{if is_extruder_used[1] and initial_extruder != 1}\n T1\nG0 Z20 F960.0\nG0 X{if 1 == 0}-10{else}330{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, nozzle_temperature_initial_layer[1] + 15))} C2 W1; common flush temp\nG0 E45 F80.0\n\nM106 S{min(255, (fan_max_speed[1] + 10) * 2.55)}\nM104 S{nozzle_temperature_initial_layer[1] + 5}\n\nG0 E45 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if 1 == 0}10{else}310{endif} F3420.0\nG0 X{if 1 == 0}-10{else}330{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{nozzle_temperature_initial_layer[1]} C3 W1\nG1 X{if 1 == 0}150.0{else}170.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if 1 == 0}0{else}320{endif} E9.35442 F3420.0\nG1 Y11 E0.68599\nG1 X{if 1 == 0}0.5{else}319.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if 1 == 0}9.5{else}310.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n M104 S{temperature_vitrification[1]}\n{endif}\n\nT[initial_extruder]\nG0 Z20 F960.0\nG0 X{if initial_extruder == 0}-10{else}330{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, nozzle_temperature_initial_layer[initial_extruder] + 15))} C2 W1; common flush temp\nG0 E45 F80.0\n\nM106 S{min(255, (fan_max_speed[initial_extruder] + 10) * 2.55)}\nM104 S{nozzle_temperature_initial_layer[initial_extruder] + 5}\n\nG0 E45 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if initial_extruder == 0}10{else}310{endif} F3420.0\nG0 X{if initial_extruder == 0}-10{else}330{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{nozzle_temperature_initial_layer[initial_extruder]} C3 W1\nG1 X{if initial_extruder == 0}150.0{else}170.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if initial_extruder == 0}0{else}320{endif} E9.35442 F3420.0\nG1 Y11 E0.68599\nG1 X{if initial_extruder == 0}0.5{else}319.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if initial_extruder == 0}9.5{else}310.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n; ready [plate_name]",
"machine_end_gcode": "G92 E0\n\nG0 Z{max_layer_z + 0.5} F600\n; retract the filament to make it easier to replace\nG0 E-35 F200\nG28\n\n {if is_extruder_used[0]}M104 T0 S0{endif}\n {if is_extruder_used[1]}M104 T1 S0{endif}\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;",
"machine_end_gcode": "G92 E0\n\nG0 Z{max_layer_z + 2.0} F600\n; retract the filament to make it easier to replace\nG0 E-35 F200\nG28\n\n {if is_extruder_used[0]}M104 T0 S0{endif}\n {if is_extruder_used[1]}M104 T1 S0{endif}\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;",
"change_filament_gcode": ";***** Update: 20230923\n{if current_extruder != next_extruder}\n; Change T[current_extruder] -> T[next_extruder] (layer [layer_num]\n; layer\nT{next_extruder}\n\nM107 P[current_extruder] ;fan off T[current_extruder]\nM104 T[current_extruder] S{temperature_vitrification[current_extruder]} ;standby T[current_extruder]\n\n{if layer_num == 1 &&\n ((filament_type[current_extruder] == \"PLA\" || filament_type[current_extruder] == \"TPU\")\n || (filament_type[next_extruder] == \"PLA\" || filament_type[next_extruder] == \"TPU\"))\n}\n ; set bed temp: {filament_type[current_extruder]}({bed_temperature[current_extruder]}) -> {filament_type[next_extruder]}({bed_temperature[next_extruder]})\n M140 S{min(bed_temperature[current_extruder], bed_temperature[next_extruder])}\n{endif}\n\nM109 T[next_extruder] S{if layer_num < 1}[nozzle_temperature_initial_layer]{else}[nozzle_temperature]{endif} C3 W1 ;wait T[next_extruder]\n{if layer_num == 1}\n G1 E{retraction_length[next_extruder]} F2000;deretract\n{endif}\n{if layer_z > first_layer_height && layer_num >= close_fan_the_first_x_layers[next_extruder]}\n; M106 P[next_extruder] S{fan_min_speed[next_extruder] * 255.0 / 100.0} ;restore fan speed for T[next_extruder]\n{endif}\n; End Toolchange\n{endif}",
"before_layer_change_gcode": "; layer_num: [layer_num]\nG92 E0"
}
Loading

0 comments on commit 8d6aaec

Please sign in to comment.