Skip to content

lyarinet/multicast

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

12 Commits
 
 
 
 
 
 

Repository files navigation

License: GPL v3

UDP multicast

UDP multicast MPEG-TS streams on Linux

A most common task for all OTT and IPTV video services is, of course, to encode a group of TV channels. And the most common way you will be receiving channels is MPEG-TS streams via multicast UDP. In this article we have explained some popular tips and tricks for working with UDP multicast MPEG-TS streams on Ubuntu and CentOS. We assume you have a linux server or a workstation with a root (superuser) access and a bunch of multicast streams available in your network.

Checking a multicast UDP stream

Suppose you know incoming UDP MPEG-TS multicast host and port:

udp://233.0.41.102:20000

In this URL 233.0.41.102 is called IP address (or host) and 20000 is port. We will use these later as an example for configuration settings.

Using tcpdump

Let’s make sure we are actually receiving a stream using tcpdump. You must be root to run tcpdump. Execute the following command:

> tcpdump -c 10 dst host 233.0.41.102 and port 20000 and multicast

This command tells to capture 10 multicast UDP packets sent to host 233.0.41.102 and port 20000. If the stream is running, you shall get something like:

tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
15:20:58.818832 IP 43.232.net.50000 > 233.0.41.102.20000: UDP, length 1316
15:20:58.824080 IP 43.232.net.50000 > 233.0.41.102.20000: UDP, length 1316
15:20:58.829467 IP 43.232.net.50000 > 233.0.41.102.20000: UDP, length 1316
15:20:58.835816 IP 43.232.net.50000 > 233.0.41.102.20000: UDP, length 1316
15:20:58.841053 IP 43.232.net.50000 > 233.0.41.102.20000: UDP, length 1316
15:20:58.846617 IP 43.232.net.50000 > 233.0.41.102.20000: UDP, length 1316
15:20:58.852052 IP 43.232.net.50000 > 233.0.41.102.20000: UDP, length 1316
15:20:58.857893 IP 43.232.net.50000 > 233.0.41.102.20000: UDP, length 1316
15:20:58.863787 IP 43.232.net.50000 > 233.0.41.102.20000: UDP, length 1316
15:20:58.869017 IP 43.232.net.50000 > 233.0.41.102.20000: UDP, length 1316
10 packets captured
70 packets received by filter
4 packets dropped by kernel

If you don’t see output and tcpdump seems to freeze, you are not receiving multicast packets. Press Ctrl-C to abort tcpdump and refer to the next section on firewall settings.

Using netstat

An alternative way to check multicast stream is by using netstat tool. You also need to be root to use it.

> netstat -a -u -n | grep 233.0.41.102:20000

If multicast stream is running, you will see:

udp        0      0 233.0.41.102:20000      0.0.0.0:*

(this line may appear twice or more times) If previous command emits nothing, you are not receiving multicast packets. Refer to the next section on firewall settings.

Firewall and multicast issues with multicast

Very often multicast streams are blocked by firewall. There are various firewalls on linux distributives, we will cover the most popular: ufw (Uncomplicated FireWall) for Ubuntu and iptables for various distributives.

Be advised that by misconfiguring the firewall you may be unable to access your server via SSH! Disabling firewall at all is highly insecure and not recommended.

ufw on Ubuntu

ufw is a default firewall for Ubuntu linux. To operate ufw you must be root.

Check current status of ufw:

> ufw status

If ufw is active, add rule to enable receiving multicast on specified host and port:

> ufw allow to 233.0.41.102 port 20000 proto udp

You may completely disable ufw by typing:

> ufw disable

This will allow all incoming connections which is insecure and really not recommended. Use it only for testing purposes for a limited period of time.

More info about ufw: UFW on Ubuntu

iptables

iptables is a more complicated firewall and it could be found on Ubuntu, CentOS and many more linux systems. To operate iptables you must be root.

To check iptables status run:

> iptables -L

It will show status and list of the firewall rules. If you have a fresh installation of OS, you should see empty rule chains:

Chain INPUT (policy ACCEPT) target     prot opt source               destination

Chain FORWARD (policy ACCEPT) target     prot opt source               destination

Chain OUTPUT (policy ACCEPT) target     prot opt source               destination

To allow an incoming multicast stream you need to add a rule by running the following command:

> iptables -A INPUT -p udp -d 233.0.41.102 --dport 20000 -j ACCEPT

Run iptables -L again and you will see:

ACCEPT     udp  --  anywhere             233.0.41.102         udp dpt:20000

iptables does not save its status after reboot, so you will need to save newly added rules by typing:

> iptables-save

More info on iptables:

Getting a list of all multicast streams

Sometimes you don’t have list of all multicast streams available. You may get a list of all incoming multicasts quickly by running following simple command:

> sudo tcpdump -n -c 100000 multicast | perl -n -e 'chomp; m/> (\d+.\d+.\d+.\d+).(\d+)/; print "udp://$1:$2\n"' | sort | uniq

It may take some time to capture 100000 packets and produce output — press Ctrl-C if you are tired and reduce amount of packets to capture.

This will produce a sorted list of incoming multicasts like:

udp://233.0.37.102:20000
udp://233.0.41.102:20000
udp://233.0.42.100:20000
udp://233.0.42.106:20000
udp://233.0.58.114:20000
udp://233.0.58.170:20000

To make sure it is an actual MPEG-TS stream and read it parameters refer to the next section.

Checking multicast MPEG-TS with ffprobe

ffprobe is a versatile utility to check various type of media files and streams. It comes in ffmpeg package.

Install ffmpeg (on Ubuntu):

> sudo apt-get install ffmpeg

Install ffmpeg (on CentOS):

> sudo yum install ffmpeg

Use ffprobe to check multicast stream:

> ffprobe udp://233.0.41.102:20000

For a valid MPEG-TS stream you will get something like this:

Input #0, mpegts, from 'udp://233.0.41.102:20000':
 Duration: N/A, start: 89651.690400, bitrate: 192 kb/s
 Program 10106
   Metadata:
     service_name    : AChannel
     service_provider: ChannelProvider
   Stream #0:0[0x19a][6]: Audio: mp2 (\[4\]\[0\]\[0\]\[0\] / 0x0004), 48000 Hz, stereo, s16p, 192 kb/s (clean effects)
   Stream #0:1[0x145]: Video: mpeg2video (Main) (\[2\]\[0\]\[0\]\[0\] / 0x0002), yuv420p(tv), 720x576 [SAR 64:45 DAR 16:9], max. 15000 kb/s, 25 fps, 25 tbr, 90k tbn, 50 tbc

Note lines starting with Stream, they contain information about video and audio data: codecs, bitrate, fps etc.

About

UDP multicast MPEG-TS streams on Linux

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published