ESPHome Firmware for Sonoff T Series wallswitches

Multifunction Version

This firmware lets you configure on-the-fly how the device will work if you single click any of it's touch surfaces - Switch toggle with relay activation (factory default) - Switch toggle without relay activation (double-click to toggle configuration) - Long-press to choose) Event button as a single click (read notes below)

Multitouch Version

Now you can use single or double click and long-press to expand the functions of this wallswitch. For example, you can single touch to turn on a smart lamp without activation the relay, you can double-click to activate the relay to turn on a dump lamp, you can long-press to turn off both lamps (use your imagination) Everything is configurable from the Home Assistant UI and everything is -of-course- local.

Notes:

If a touch surface is configured as a momentary button/switch (we call it "event button") then an automation must be implemented to listen to that event. For example below we use a helper (input_boolean.test_toggle). Be sure to replace "$friendly_name" with your device name. This automation script could be expanded to include all event buttons using a choose function The reason that no automation in included in the firmware is that most of the times it's a config-and-forget situation. Options are stored on the ESP chip every 10 minutes. To avoid conffusion, I suggest not to modify entities, only name and the icons. alias: event buttons toggle description: example mode: single trigger: - platform: event event_type: esphome.button_pressed event_data: message: $friendly_name button1.1 is pressed - platform: event event_type: esphome.button_pressed event_data: message: $friendly_name button1.2 is pressed... ...etc condition: [] action: - service: input_boolean.toggle data: {} target: entity_id: input_boolean.test_toggle - delay: 1s # if events are too quick