Skip to content
/ pytek Public

PyTek - Python API for Tektronix oscilloscopes' serial interface

License

GPL-3.0, Unknown licenses found

Licenses found

GPL-3.0
LICENSE.txt
Unknown
COPYING
Notifications You must be signed in to change notification settings

kerel-fs/pytek

Repository files navigation

PyTek - Python API for Tektronix oscilloscopes' serial interface

[GPLv3] [drone.io status]

PyTek provides a python API for interacting with Tektronix oscilloscopes over a serial interface. It currently supports some basic commands for the TDS3000 series of Digital Phosphor Oscilloscopes, especially capturing waveforms and screen shots from the device.

Note

Serial Port not Included

PyTek relies on a thirdparty serial port for communications, specifically one that matches the pyserial API. It is recommended that you simply use pyserial itself.

A python package that gives you an API for interacting with supported Tektronix oscilloscopes over a serial interace.

$ pip install pytek

Or, from source:

$ python setup.py install

We don't provide a serial port implementation. We suggest, pyserial:

$ pip install pyserial
>>> from serial import Serial
>>> from pytek import TDS3k
>>>
>>> port = Serial("COM1", 9600, timeout=1)
>>> tds = TDS3k(port)
>>>
>>>
>>> # Make the scope identify itself.
...
>>> tds.identify()
'TEKTRONIX,TDS 3034,0,CF:91.1CT FV:v2.11 TDS3GM:v1.00 TDS3FFT:v1.00 TDS3TRG:v1.00'
>>>
>>>
>>>
>>> # Capture waveform data
...
>>> waveform = tds.get_waveform(start=100, stop=109)
>>> waveform
<generator object <genexpr> at 0x0238B8A0>
>>
>>> for x,y in waveform:
...     print x, y
...
-0.0045 -0.16
-0.004499 -0.04
-0.004498 -0.04
-0.004497 -0.12
-0.004496 -0.12
-0.004495 -0.08
-0.004494 -0.12
-0.004493 -0.16
-0.004492 -0.2
-0.004491 -0.08
>>>
>>> tds.x_units()
's'
>>> tds.y_units()
'V'
>>>
>>>
>>>
>>> # Grab a screen shot (this will take a few minutes).
...
>>> ofile = open("screenshot.tiff", "wb")
>>> tds.screenshot(ofile, "tiff")
>>>
>>>
>>>
>>>
>>> #Fin.
...
>>> tds.close()
>>>

You'll need a serial port interface. See the "Serial?" section, above.

To build the sphinx docs from source (as is), you'll need the sphinx_rtd_theme:

$ pip install sphinx_rtd_theme

PyTek package includes the following extras (optional installs):

serial
Adds pyserial package as a requirement, the recommended serial port interface.
docs
Adds sphinx_rtd_theme package as a requirement, needed for building sphinx docs.

This project is currently hosted on bitbucket, at https://bitbucket.org/bmearns/pytek/. The primary author is Brian Mearns: you can contact Brian through bitbucket at https://bitbucket.org/bmearns.

PyTek is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

PyTek is distributed in the hope that it will be useful, but without any warranty; without even the implied warranty of merchantability or fitness for a particular purpose. See the GNU General Public License for more details.

A copy of the GNU General Public License is available in the PyTek distribution under the file LICENSE.txt. If you did not receive a copy of this file, see http://www.gnu.org/licenses/.

About

PyTek - Python API for Tektronix oscilloscopes' serial interface

Resources

License

GPL-3.0, Unknown licenses found

Licenses found

GPL-3.0
LICENSE.txt
Unknown
COPYING

Stars

Watchers

Forks

Packages

No packages published