Skip to content

jcubbage/hw-acceptance-unit-test-cycle

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

40 Commits
 
 
 
 

Repository files navigation

Acceptance-Unit Test Cycle

In this assignment you will use a combination of Acceptance and Units tests with the Cucumber and RSpec tools to add a "find movies with same director" feature to RottenPotatoes.

NOTE: Do not clone this repo to your workspace. Fork it first, then clone your fork.

Learning Goals

After you complete this assignment, you should be able to:

  • Create and run simple Cucumber scenarios to test a new feature
  • Use RSpec to create unit tests that drive the creation of app code that lets the Cucumber scenario pass
  • Understand where to modify a Rails app to implement the various parts of a new feature, since a new feature often touches the database schema, model(s), view(s), and controller(s)

Introduction and Setup

To get the initial RottenPotatoes code please clone this repo to your local machine or C9 workspace, and execute the following command in your top level projects directory, or the root of your C9 workspace:

$ git clone https://github.com/saasbook/hw-acceptance-unit-test-cycle

Once you have the clone of the repo:

  1. Change into the rottenpotatoes directory: cd hw-acceptance-unit-test-cycle/rottenpotatoes
  2. Run bundle install --without production to make sure all gems are properly installed.
  3. Run bundle exec rake db:migrate and bundle exec rake db:migrate RAILS_ENV=test to apply database migrations to both development and test databases.
  4. Run these commands to set up the Cucumber directories (under features/) and RSpec directories (under spec/) if they don't already exist, allowing overwrite of any existing files:
rails generate cucumber:install capybara
rails generate cucumber_rails_training_wheels:install
rails generate rspec:install
  1. Create a new file called rspec.rb in features/support with the following contents:
require 'rspec/core'

RSpec.configure do |config|
  config.mock_with :rspec do |c|
    c.syntax = [:should, :expect]
  end
  config.expect_with :rspec do |c|
    c.syntax = [:should, :expect]
  end
end

This prevents RSpec from issuing DEPRECATION warnings when it encounters deprecated syntax in features/step_definitions/web_steps.

  1. You can double-check if everything was installed by running the tasks rspec and cucumber.

Since presumably you have no features or specs yet, both tasks should execute correctly reporting that there are zero tests to run. Depending on your version of rspec, it may also display a message stating that it was not able to find any _spec.rb files.

Part 1: add a Director field to Movies

Create and apply a migration that adds the Director field to the movies table. The director field should be a string containing the name of the movie’s director. HINT: use the add_column method of ActiveRecord::Migration to do this.

Remember to add :director to the list of movie attributes in the def movie_params method in movies_controller.rb.

Remember that once the migration is applied, you also have to do rake db:migrate RAILS_ENV=test to load the new post-migration schema into the test database!

Part 2: use Acceptance and Unit tests to get new scenarios passing

We've provided three Cucumber scenarios to drive creation of the happy path of Search for Movies by Director. The first lets you add director info to an existing movie, and doesn't require creating any new views or controller actions (but does require modifying existing views, and will require creating a new step definition and possibly adding a line or two to features/support/paths.rb).

The second lets you click a new link on a movie details page "Find Movies With Same Director", and shows all movies that share the same director as the displayed movie.
For this you'll have to modify the existing Show Movie view, and you'll have to add a route, view and controller method for Find With Same Director.

The third handles the sad path, when the current movie has no director info but we try to do "Find with same director" anyway.

Going one Cucumber step at a time, use RSpec to create the appropriate controller and model specs to drive the creation of the new controller and model methods. At the least, you will need to write tests to drive the creation of:

  • a RESTful route for Find Similar Movies (HINT: use the 'match' syntax for routes as suggested in "Non-Resource-Based Routes" in Section 4.1 of ESaaS). You can also use the key :as to specify a name to generate helpers (i.e. search_directors_path) http://guides.rubyonrails.org/routing.html Note: you probably won’t test this directly in rspec, but a line in Cucumber or rspec will fail if the route is not correct.

  • a controller method to receive the click on "Find With Same Director", and grab the id (for example) of the movie that is the subject of the match (i.e. the one we're trying to find movies similar to)

  • a model method in the Movie model to find movies whose director matches that of the current movie. Note: This implies that you should write at least 2 specs for your controller: 1) When the specified movie has a director, it should... 2) When the specified movie has no director, it should ... and 2 for your model: 1) it should find movies by the same director and 2) it should not find movies by different directors.

It's up to you to decide whether you want to handle the sad path of "no director" in the controller method or in the model method, but you must provide a test for whichever one you do. Remember to include the line require 'rails_helper' at the top of your *_spec.rb files.

We want you to report your code coverage as well.

Add gem 'simplecov', :require => false to the test group of your gemfile, then run bundle install --without production.

Next, add the following code BEFORE ANYTHING ELSE ON LINE ONE of spec/rails_helper.rb and features/support/env.rb:

require 'simplecov'
SimpleCov.start 'rails'

WARNING: THE ABOVE CODE MUST COME BEFORE ALL OTHER CODE in spec/rails_helper.rb and features/support/env.rb or YOUR COVERAGE REPORTS WILL BE INACCURATE

Now when you run rspec or cucumber, SimpleCov will generate a report in a directory named coverage/. Since both RSpec and Cucumber are so widely used, SimpleCov can intelligently merge the results, so running the tests for Rspec does not overwrite the coverage results from SimpleCov and vice versa.

To see the results in Cloud9, open /coverage/index.html. You will see the code, but click the Run button at the top. This will spin up a web server with a link in the console you can click to see your coverage report.

Improve your test coverage by adding unit tests for untested or undertested code. Specifically, you can write unit tests for the index, update, destroy, and create controller methods.

Submission:

Here are the instructions for submitting your assignment for grading. Submit a zip file containing the following files and directories of your app:

  • app/
  • config/
  • db/migrate
  • features/
  • spec/
  • Gemfile
  • Gemfile.lock

If you modified any other files, please include them too. If you are on a *nix based system, navigate to the root directory for this assignment and run

$ cd ..
$ zip -r hw5.zip rottenpotatoes/app/ rottenpotatoes/config/ rottenpotatoes/db/migrate rottenpotatoes/features/ rottenpotatoes/spec/ rottenpotatoes/Gemfile rottenpotatoes/Gemfile.lock

This will create the file hw5.zip, which you will submit.

IMPORTANT NOTE: Your submission must be zipped inside a rottenpotatoes/ folder so that it looks like so:

$ tree
.
└── rottenpotatoes
    ├── Gemfile
    ├── Gemfile.lock
    ├── app
    ...

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Ruby 61.9%
  • HTML 28.8%
  • CSS 8.0%
  • JavaScript 1.3%