Update documentation for Linux networking V3

Signed-off-by: nupuruttarwar <[email protected]>

docs/apps/lnw/es2k/es2k-lnw-overlay-vms.md

@@ -31,21 +31,33 @@ for more details on this feature.
 
 Prerequisites:
 
-- Download `hw-p4-programs` TAR file specific to the build and extract it to get `fxp-net_linux-networking-v2` p4 artifacts. Go through `Limitations` specified in `README` and bringup the setup accordingly.
-- Follow steps mentioned in [Deploying P4 Programs for E2100](/guides/es2k/deploying-p4-programs) for bringing up IPU with a custom P4 package.
+- For Linux Networking V2
+   - Download `hw-p4-programs` TAR file specific to the build and extract it to get `fxp-net_linux-networking-v2` p4 artifacts. Go through `Limitations` specified in `README` and bringup the setup accordingly.
+   - Follow steps mentioned in [Deploying P4 Programs for E2100](/guides/es2k/deploying-p4-programs) for bringing up IPU with a custom P4 package.
 Modify `load_custom_pkg.sh` with following parameters for linux_networking package:
 
 ```text
     sed -i 's/sem_num_pages = 1;/sem_num_pages = 25;/g' $CP_INIT_CFG
     sed -i 's/lem_num_pages = 1;/lem_num_pages = 10;/g' $CP_INIT_CFG
     sed -i 's/acc_apf = 4;/acc_apf = 16;/g' $CP_INIT_CFG
+```
+- For Linux Networking V3
+   - Download `hw-p4-programs` TAR file specific to the build and extract it to get `fxp-net_linux-networking-v3` p4 artifacts. Go through `Limitations` specified in `README` and bringup the setup accordingly.
+
+   - Follow steps mentioned in [Deploying P4 Programs for E2100](/guides/es2k/deploying-p4-programs) for bringing up IPU with a custom P4 package.
+Modify `load_custom_pkg.sh` with following parameters for linux_networking package:
 
+```text
+    sed -i 's/sem_num_pages = 1;/sem_num_pages = 25;/g' $CP_INIT_CFG
+    sed -i 's/lem_num_pages = 1;/lem_num_pages = 10;/g' $CP_INIT_CFG
+    sed -i 's/mod_num_pages = 1;/mod_num_pages = 2;/g' $CP_INIT_CFG
+    sed -i 's/acc_apf = 4;/acc_apf = 16;/g' $CP_INIT_CFG
 ```
 
 - Download `IPU_Documentation` TAR file specific to the build and refer to `Getting Started Guide` on how to install compatible `IDPF driver` on host. Once an IDPF driver is installed, bring up SRIOV VF by modifying the `sriov_numvfs` file present under one of the IDPF network devices. Example as below
 
   ```bash
-  echo 16 > /sys/class/net/ens802f0/device/sriov_numvfs
+  echo 8 > /sys/class/net/ens802f0/device/sriov_numvfs
   ```
 
 Notes about topology: