Skip to content

insolar/observer

Repository files navigation

Insolar Observer node

Insolar Observer node (later "the Node") allows trusted agents such as crypto exchanges to collect record data produced by Insolar smart contracts, organize it into a SQL database, and aggregate various statistical data.

Trusted agents can integrate the Node into their business applications or use the Node API to get data at their discretion.

The Node communicates with Insolar MainNet via gRPC and obtains data from a Heavy Material Node run on Insolar MainNet.

Access to this Heavy Material Node is controlled by the Insolar authentication service and is limited to registered trusted agents. This mechanism is designed to protect the Node users against inaccurate or corrupted data.

Meanwhile, the Node users are responsible for the data they store locally on their Node instance and can regulate local access via an access control system of their choice.

To use the Node, you need to:

  1. Install the prerequisites.
  2. Obtain an authorized access to Insolar MainNet.
  3. Build, deploy and monitor Insolar Observer node on the hardware of your choice.

There are no strict hardware or network recommendations for the Node, and users can choose the hardware and network connection at their discretion.

The tests showed the following configuration gives satisfying results:

  • Quad core CPU 3.5GHz
  • 4GB DDR3 RAM
  • SATA SSD
  • 10Mbps Internet connection with low latency

Install the prerequisites

Install and set up PostgreSQL 11.4 and Go Tools 1.15.

Obtain an authorized access to Insolar MainNet

The Node users need to obtain an authorized access, otherwise their Node instance is not able to access the Heavy Material Node on Insolar MainNet or to collect data.

To obtain it:

  1. Contact Insolar Team to register as a trusted agent.

  2. After the registration, the Team will send you your login along with a unique link to set your password.

    Customary with the modern security policies, the link is active for a limited time and should be used within the next 24h after its generation.

    The link doesn't have a common Web UI and should be addressed via an HTTP client. For example, curl.

  3. Set your password using the link. Consider this command as the reference example:

    curl --request POST \
    --url '<unique_link_given_by_Insolar_Team>' \
    --header 'content-type: application/json' \
    --data '{
    "login": "<your_login>",
    "password": "<your_password>"
    } '
    

    The correct expected result is to see no errors returned by Curl.

  4. After setting your password, put your login and password into the /.artifacts/observer.yaml configuration file (see Build binaries).

    Working with Insolar MainNet, your Node instance uses your credentials from observer.yaml to obtain an access token to successfully communicate with the MainNet.

Build

  1. Clone the Node and go to its directory:

    git clone [email protected]:insolar/observer.git && cd observer
    

    Tip: syntax of all subsequent commands and directories implies that you run or see them from the Node root directory.

  2. Build binaries using the instructions from the Makefile:

    make all-node
    

    This command generates:

    • Three necessary configuration files (migrate.yaml, observer.yaml, observerapi.yaml) and places them into the ./.artifacts directory.
    • Thee binaries (migrate, observer, api) and places them into the ./bin directory.

    Warning: The Node uses Go modules. You may need to set the Go modules environment variable to on:

    GO111MODULE=on
    

Deploy

To deploy, do the following:

  1. Initialize your PostgreSQL database.

  2. Configure and deploy the Node.

  3. Configure and deploy the Node API.

  4. Deploy the monitoring system.

Initialize your PostgreSQL instance

Initialize the necessary database and tables in your PostgreSQL instance:

make migrate-init

Tip: migrate-init is only for the initial database setting-up. For updating the database structure later on, run:

./bin/migrate --dir=scripts/migrations --init --config=.artifacts/migrate.yaml

Configure and deploy the Node

  1. Configure your access credentials in the auth subsection ./.artifacts/observer.yaml (see Obtain an authorized access to Insolar MainNet):

    replicator:
       auth:
          login: ""
          password: ""
    

    For the full list of parameters and their description, check Configuration parameters.

    Tip: You can override all parameters in observer.yaml via environment variables that start with OBSERVER and use _ as a separator. For example, OBSERVER_DB_URL=... or OBSERVER_REPLICATOR_LISTEN=....

    Warning: Overriding via ENV variables works only with the configuration file in place. The configuration file must have the default number of parameters.

  2. Run the Node:

    ./bin/observer --config .artifacts/observer.yaml
    

    Wait for a while for it to sync with the trusted HMN.

    Tip: initial synching can take various time depending on your hardware and network properties. An approximate time is 18 hours on a quad core CPU 3.5GHz, SATA SSD, 4GB DDR3 RAM on a 10Mbps connection with averagely 50ms network latency, and default Node configuration parameters.

Configure and deploy the Node API

  1. Configure the API endpoint parameter in ./.artifacts/observerapi.yaml.

    For example:

    listen: 127.0.0.1:5678
    

    For the full list of parameters and their description, check Configuration parameters.

    Tip: You can override all parameters in observerapi.yaml via environment variables that start with OBSERVERAPI and use _ as a separator. For example, OBSERVERAPI_DB_URL=... or OBSERVERAPI_LISTEN=....

    Warning: Overriding via ENV variables works only with the configuration file in place. The configuration file must have the default number of parameters.

  2. Run the Node API:

    ./bin/api --config .artifacts/observerapi.yaml
    
  3. Run a healthcheck on the Node and Node API: in a web browser of your choice, address the local pulse_number endpoint to get the current pulse; then refresh the page to make sure the pulse has changed to the next one.

    http://127.0.0.1:8080/api/pulse/number
    

    Tip: Read the Node API description for the complete set of available API requests.

Deploy the monitoring system

  1. Install and deploy Grafana and Prometheus.

    You can get the config for Prometheus here.

  2. Import this Grafana dashboard into Grafana or create your own.

    If necessary, read how to import a dashboard.

Update the Node

Upon an upcoming Insolar MainNet update, your Node instance may suspend synching due to version change. To resume synching, update your Node instance.

Each time your Node instance connects to the trusted Heavy Material Node, the instance sends its client type (client_type), communication protocol version (heavy_version), and smart contract version (contract_version) to this Heavy Material Node.

If the protocol and/or smart contract versions are older than those accepted by the Heavy Material Node, the Heavy Material Node sends back the following message: version of the observer is outdated. Please upgrade this client.

Upon receiving this message, your Node instance logs it and stops in 12s. Attempts to reconnect result in a stop.

Your Node instance also changes the is_deprecated_client metrics value to 1, which causes the following message on the Grafana board used for the Node monitoring: Your Node is out of date. Please update your Node.

To update your Node instance:

  1. Stop your Node instance if it didn't stop automatically.

  2. Clone and build the Node:

    git clone [email protected]:insolar/observer.git && cd observer
    make all-node
    
  3. Check for new or updated configuration parameters to make sure your current configurations are fully compatible with the updated Node binary files.

  4. Run your Node and Node API with the following commands:

    ./bin/observer --config .artifacts/observer.yaml
    ./bin/api --config .artifacts/observerapi.yaml
    

Additional details

Visit the Node wiki for additional details on database description, configuration parameters description and metrics description.

Contribute!

Feel free to submit issues, fork the repository and send pull requests!

To make the process smooth for both reviewers and contributors, familiarize yourself with the following guidelines:

  1. Open source contributor guide.
  2. Style guide: Effective Go.
  3. List of shorthands for Go code review comments.

When submitting an issue, include a complete test function that reproduces it.

Thank you for your intention to contribute to the Insolar Observer node project. As a company developing open-source code, we highly appreciate external contributions to our project.

Contacts

If you have any additional questions, join our developers chat on Telegram.

Our social media:

License

This project is licensed under the terms of the MIT License.