Issues

• Time zones for Alberta and British Columbia are incorrect

  home-assistant/core#190078 · Filter by author BillWiegert opened on Nov 2, 2026
  3

• Alexa Devices integration does not login

  home-assistant/core#190066 · Filter by author potatinn opened on Nov 2, 2026

• Netatmo: update fails with "RuntimeError: deque mutated during iteration" when the publisher queue changes during a fetch

  integration: netatmo
  home-assistant/core#190042 · Filter by author cherjr opened on Nov 2, 2026
  1

  

• SONOFF ZBMINIL2 (fw 0x0000100E) still drops off with the KeepAlive quirk applied in 2026.10.4; stable only after allowing unsecured rejoins (ZBDongle-E)

  integration: zha
  home-assistant/core#190025 · Filter by author craimasjien opened on Nov 2, 2026
  3

  

• Nanoleaf: IPv6-only discovery replaces IPv4 host and reloads config entry every few minutes

  integration: nanoleaf
  home-assistant/core#190024 · Filter by author Trurl101 opened on Nov 2, 2026
  2

  

• [BETA] Prusalink: Cannot connect

  integration: prusalink
  home-assistant/core#190014 · Filter by author Revilo91 opened on Nov 2, 2026
  1

• friendly_name still includes device name when “Use device name” is disabled and name equals original name

  question
  home-assistant/core#190000 · Filter by author smartmatic opened on Nov 2, 2026
  2

  

• Alexa Devices: Echo Show DND switch reverts to off when another Echo's DND changes at the same time

  integration: alexa_devices
  home-assistant/core#189982 · Filter by author RenatoAscencio opened on Nov 2, 2026
  1

  

• Temperature setting stepping is 1°C while app and remote is 0.5°C

  integration: daikin
  home-assistant/core#189969 · Filter by author autourdupc opened on Nov 2, 2026
  1

• local_ip showing docker0 IP instead of LAN adapters one

  integration: local_ip
  home-assistant/core#189955 · Filter by author N3rdix opened on Nov 2, 2026
  1

• Rounding errors cause warnings due to state class total_increasing

  integration: apsystems
  home-assistant/core#189952 · Filter by author G-nn-r opened on Nov 2, 2026
  1

• ZHA: Third Reality 3RSP02064Z plug gets a phantom 'Opening' binary sensor (device_class: opening) from its OnOff cluster, landing it in Security

  home-assistant/core#189950 · Filter by author nhod opened on Nov 2, 2026

• WiZ smart plug fails to turn on/off – Error -32602: Invalid params

  home-assistant/core#189949 · Filter by author ratulbmg opened on Nov 2, 2026
  1

• private_ble_device: estimated_distance always reports 0.0 m due to falsy tx_power short-circuit and tx_power * 10 unit mismatch

  integration: private_ble_device
  home-assistant/core#189948 · Filter by author dougransom opened on Nov 2, 2026
  1

  

• VeSync: Sprout Humidifier night light select shows "off" while light is on

  integration: vesync
  home-assistant/core#189937 · Filter by author jmtraylorjr opened on Nov 1, 2026
  1

• Midea Portasplit shows wrong realtime power

  integration: midea
  home-assistant/core#189923 · Filter by author gunnicom opened on Nov 1, 2026
  2

  

• Issue playing back video clips from NVR

  integration: reolink
  home-assistant/core#189920 · Filter by author SketchThis opened on Nov 1, 2026
  1

  

• Portainer integration adding invalid devices/entities when containers are updated with docker compose.

  integration: portainer
  home-assistant/core#189918 · Filter by author besteru opened on Nov 1, 2026
  1

  

• [aw] Check requirements (AW) is missing required tool

  agentic-workflows
  home-assistant/core#189889 · Filter by author github-actions opened on Nov 1, 2026

• Ring: FCM push listener shuts down with "Incorrect padding" – ding/motion events stop

  home-assistant/core#189885 · Filter by author mrhungr-github opened on Nov 1, 2026

• tplink_omada gateway port binary sensors raise StopIteration when a port disappears from port_status

  integration: tplink_omada
  home-assistant/core#189881 · Filter by author zhengqiuyang opened on Nov 1, 2026
  1

• Zeroconf keeps announcing stale IP addresses after a host address change (e.g. IPv6 prefix change) until restart

  integration: zeroconf
  home-assistant/core#189880 · Filter by author prendl opened on Nov 1, 2026
  2

  

• Daikin zeroconf flow runs blocking UDP discovery on the event loop

  integration: daikin
  home-assistant/core#189871 · Filter by author krid002 opened on Nov 1, 2026
  1

• AirNow: an hour with no usable observations makes the AQI sensor report 0 with a blank category

  integration: airnow
  home-assistant/core#189868 · Filter by author MasonChinkin opened on Nov 1, 2026
  1

• Adding a second server to jellyfin says account already configured

  integration: jellyfin
  home-assistant/core#189863 · Filter by author FredrikM97 opened on Nov 1, 2026
  1