Skip to content

hassenius/terraform-icp-vmware

Repository files navigation

Terraform ICP VMware HA

This Terraform example configurations uses the VMware vSphere provider to provision virtual machines on VMware and TerraForm Module ICP Deploy to prepare VMs and deploy IBM Cloud Private on them. This Terraform template automates best practices learned from installing ICP on VMware at numerous client sites in production.

This template provisions an HA cluster with ICP 3.1 enterprise edition.

Pre-requisites

  • Working copy of Terraform
  • The example assumes the VMs are provisioned from a template that has ssh public keys loaded in ${HOME}/.ssh/authorized_keys. After VM creation, terraform will SSH into the VM to prepare and start installation of ICP using the SSH private key provided. If your VM template uses a different user from root, update the ssh_user section in variables.tf
  • The template is tested on VM templates based on Ubuntu 16.04

VM Template image preparation

  1. Create a VM image (RHEL or Ubuntu 16.04).

    • The automation will create an additional block device at unit number 1 (i.e. /dev/sdb) for local docker container images and attempt to configure Docker in direct-lvm or overlay2 mode, depending on your operating system. RHEL 7.4 and older will default to devicemapper, RHEL 7.5 and newer will default to Overlay2. All supported Ubuntu versions will default to Overlay2. Additional block devices are also mounted at various directories that hold ICP data depending on the node role. You may pre-install docker, but it must be configured in direct-lvm or overlay2 mode. For direct-lvm the block device must be set as the second disk. The simplest way of getting this to work is to create a template with a single OS disk without installing docker and let the automation configure direct-lvm or overlay2 mode as appropriate.
  2. Ensure that the ssh_user can call sudo without password.

  3. Install any other needed packages:

    1. Shared storage clients, e.g. if the shared storage is NFS for the registry and audit directories, install NFS clients.
    2. In environments with restricted outbound internet, the terraform automation requires and attempts to install PyYAML. You can pre-install it into the template:
      • yum install PyYAML on RHEL
      • apt install python-yaml on Ubuntu
    3. Install VMware Tools or open-vm-tools
    4. For docker installation, install any additional pre-requisites:
      • yum install device-mapper libseccomp libtool-ltdl libcgroup iptables on RHEL
      • apt install libtdl7 thin-provisioning-tools lvm2 on Ubuntu
    5. For RHEL templates, VMware guest customization requires perl.
    6. For RHEL templates, either disable the firewall (systemctl disable firewalld), or add firewall_enabled: true to icp-config.yaml.
  4. (optional) If you are not providing image_location, and have pre-installed docker, you can also pre-load the docker images from the ICP package you wish to install.

    tar xf ibm-cloud-private-x86_64-3.1.tar.gz -O | sudo docker load
  5. Shutdown the VM Convert to a template, make note the name of the template.

Other environment preparation

The automation requires an HTTP or NFS server to hold the ICP binaries and docker packages. NFS storage is recommended as it can host these binaries and also the shared storage location for registry_mount_src, audit_mount_src, docker_package_location and image_location.

Using the Terraform templates

  1. git clone or download the templates

  2. Export your vSphere username and password into environment variables on the system you will run Terraform from. This can be done via the following commands:

    • export VSPHERE_USER={myusername} replacing {myusername} with your vSphere username
    • export VSPHERE_PASSWORD={mypassword} replacing {mypassword} with your vSphere password
  3. Create a terraform.tfvars file to reflect your environment. Please see variables.tf and below tables for variable names and descriptions. Here is an example terraform.tfvars file:

    #######################################
    ##### vSphere Access Credentials ######
    #######################################
    vsphere_server = "10.25.0.20"
    
    # Set username/password as environment variables VSPHERE_USER and VSPHERE_PASSWORD
    
    ##############################################
    ##### vSphere deployment specifications ######
    ##############################################
    # Following resources must exist in vSphere
    vsphere_datacenter = "DC1"
    vsphere_cluster = "Cluster1"
    vsphere_resource_pool = "ICP31_pool/terraform_icp_31"
    network_label = "LabPrivate"
    datastore = "LabDatastore"
    template = "ubuntu_1604_base_template"
    # Folder to provision the new VMs in, does not need to exist in vSphere
    folder = "terraform_icp_31"
    
    ##################################
    ##### ICP deployment details #####
    ##################################
    
    ##### ICP instance name #####
    # MUST consist of only lower case alphanumeric characters and '-'
    instance_name = "user1-icp-31"
    
    
    ##### Network #####
    staticipblock = "10.30.0.0/24"
    staticipblock_offset = 2
    gateway = "10.0.0.1"
    netmask = "16"
    dns_servers = [ "10.0.0.11", "10.0.0.12" ]
    
    # Cluster access
    cluster_vip = "10.30.0.1"
    cluster_vip_iface = "ens160"
    proxy_vip = "10.0.0.2"
    proxy_vip_iface = "ens160"
    
    ##### Local Terraform connectivity details #####
    ssh_user = "virtuser"
    ssh_password = "SuperPa88w0rd"
    
    ##### ICP installation method #####
    icp_inception_image = "ibmcom/icp-inception:3.1.0-ee"
    private_registry    = "registry.example.com"
    registry_username   = "myUsername"
    registry_password   = "myPassword"
    
    ##### ICP admin user password #####
    # Non default admin user password 'admin' recommended
    icppassword = "SuperPa88w0rd"
    
    ##### ICP Cluster Components #####
    master = {
        nodes = "3"
        vcpu = "8"
        memory = "16384"
        docker_disk_size = "250"
        thin_provisioned = "true"
    }
    proxy = {
        nodes = "3"
        vcpu = "4"
        memory = "8192"
        thin_provisioned = "true"
    }
    worker = {
        nodes = "3"
        vcpu = "8"
        memory = "8192"
        thin_provisioned = "true"
    }
    management = {
        nodes = "3"
        vcpu = "4"
        memory = "16384"
        thin_provisioned = "true"
    }
    va = {
        nodes = "2"
        vcpu = "4"
        memory = "8192"
        thin_provisioned = "true"
    }
    
    ##### NFS Server #####
    registry_mount_src = "10.0.0.5:/storage/user1-icp-31/registry"
    audit_mount_src = "10.0.0.5:/storage/user1-icp-31/audit"
    
  4. Run terraform init to download dependencies (modules and plugins)

  5. Run terraform plan to investigate deployment plan

  6. Run terraform apply to start deployment

ICP installation method

Below you can find the different paths to install ICP on VMware.

  1. Install from ICP binary package. In order to install ICP from it's binary package, we need to specify the image_location of the binary in the terraform.tfvars file:
##### ICP installation method #####
icp_inception_image = "ibmcom/icp-inception:3.1.0-ee"
image_location = "nfs:<nfs_server_ip_address>:<path_within_your_nfs_server>/ibm-cloud-private-x86_64-3.1.0.tar.gz"
  1. Install from a private Docker registry which does not require authentication. In order to install ICP from a previously configured (with ICP images loaded into) private Docker registry which does not require authentication, we need to specify the private_registry in the terraform.tfvars file:
##### ICP installation method #####
icp_inception_image = "ibmcom/icp-inception:3.1.0-ee"
private_registry    = "registry.example.com"
  1. Install from a private Docker registry which requires authentication. In order to install ICP from a previously configured (with ICP images loaded into) private Docker registry which requires authentication, we need to specify the private_registry and its credentials, registry_username and registry_password, in the terraform.tfvars file:
##### ICP installation method #####
icp_inception_image = "ibmcom/icp-inception:3.1.0-ee"
private_registry    = "registry.example.com"
registry_username   = "myUsername"
registry_password   = "myPassword"

Terraform configuration

vSphere variables

name required value
vsphere_server yes IP or hostname of vSphere server
vsphere_user no, moved to environment variables Username for vSphere server
vsphere_password no, moved to environment variables Password for vSphere user
allow_unverified_ssl no SSL certificate verification when connecting to vSphere, true by default.
vsphere_datacenter yes Name of the vSphere datacenter to deploy VMs to
vsphere_cluster yes Name of the vSphere cluster to deploy VMs to (must be under the vSphere datacenter)
vsphere_resource_pool no Path of the Resource Pool to deploy VMs to (must be under the vSphere cluster), will be in the format like /path/to/target, by default will add VMs to root resource pool in the cluster
network_label yes Network label to place all VMs on
datastore yes Name of the datastore to place all disk images in.
folder no Name of the VM folder to create where all created VMs are placed in, if not supplied, will place in root folder.
template yes Name of the VM template to use to create all VM images

Network variables

Although the template defaults configure the cluster using DHCP addresses, it is strongly recommended to configure values for each of these variables so that the cluster is configured using static IP addresses.

name value
VMware network
gateway Default gateway to configure for all VMs. Leave blank to retrieve from DHCP.
netmask Number of bits, in CIDR notation, of the subnet netmask (e.g. 16). Set to 0 to retrieve from DHCP.
dns_servers List of DNS servers to configure in the VMs. By default, uses Google public DNS (8.8.8.8 and 8.8.4.4). Set to blank to retrieve from DHCP.
VM IP Calculation
staticipblock Subnet to place all VMs in, in CIDR notation. Ensure that the subnet has enough useable address for all created VMs. For example, 192.168.0.0/24 will contain 256 addresses. It is recommended to set this variable so that the cluster is configured with static IP addresses. The default is set to 0.0.0.0/0 to retrieve from DHCP (not recommended).
staticipblock_offset Specify the starting offset of the staticipblock to begin assigning IP addresses from. e.g. with staticipblock 192.168.0.0/16, offset of 10 will cause IP address assignment to begin at 192.168.0.11.
ICP Overlay network
network_cidr Container overlay network subnet; this subnet is internal to the cluster but should not overlap with other subnets in the environment. Default is 192.168.0.0/16
service_network_cidr Service network subnet; this is internal to the cluster but should not overlap with other subnets in the environment. Default is 10.10.10.0/24

ICP Installation variables

name default value value
ssh_user root User that terraform will SSH as, must have passwordless sudo access.
ssh_password <none> Password for SSH user, needed to SSH in machines and add the Terraform-created SSH keys for password-less SSH installation
docker_package_location <none> location of ICP docker package, e.g. http://<myhost>/icp-docker-18.03_x86_64.bin or nfs:<myhost>:/path/to/icp-docker-18.03_x86_64.bin
icp_inception_image ibmcom/icp-inception:3.1.0-ee Name of the icp-inception image to use. You may need to change it to install a different version of ICP.
image_location <none> location of ICP binary package, e.g. http://<myhost>/ibm-cloud-private-x86_64-3.1.0.tar.gz or nfs:<myhost>:/path/to/ibm-cloud-private-x86_64-3.1.0.tar.gz
private_registry <none> Private Docker registry to install ICP from. It should contain the appropriate ICP images
registry_username <none> Private Docker registry username
registry_password <none> Private Docker registry password
instance_name icptest Name of the ICP installation. Will be used as basename for VMs. MUST consist of only lower case alphanumeric characters and '-'
domain <instance_name>.icp Specify domain name to be used for linux customization on the VMs.

ICP Configuration Variables

The ICP configuration can further be customized by editing the icp-config.yaml file and by following the product documentation. The Terraform templates here expose the key variables that have infrastructure dependencies.

name required value
proxy_vip no Virtual IP address for the Proxy Nodes. One of proxy_vip or proxy_lb_address must be set for HA.
proxy_vip_iface no Network interface to use for the Proxy Node virtual IP. Must be set if proxy_vip is set.
cluster_vip no Virtual IP address for the Master node console. One of cluster_vip or cluster_lb_address must be set for HA.
cluster_vip_iface no Network Interface to use for the Master node console. Must be set if cluster_vip is set.
proxy_lb_address no External load balancer address for the Proxy Nodes. One of proxy_vip or proxy_lb_address must be set for HA.
cluster_lb_address no External load balancer address for the Master node console. One of cluster_vip or cluster_lb_address must be set for HA.
registry_mount_src yes Source of the shared storage for the registry directory /var/lib/registry
registry_mount_type no Type of mountpoint for the registry shared storage directory. nfs by default.
registry_mount_options no Mount options to pass to the registry mountpoint. defaults by default.
audit_mount_src yes Source of the shared storage for the audit directory /var/lib/icp/audit
audit_mount_type no Type of mountpoint for the audit shared storage directory. nfs by default.
audit_mount_options no Mount options to pass to the audit mountpoint. defaults by default.
icppassword yes Password for the initial admin user in ICP. admin by default
disable_management_services no List of management services to disable. Default: ["istio", "vulnerability-advisor", "storage-glusterfs", "storage-minio"]

About

Terraform recipe to deploy IBM Cloud Private on VMware

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published