Skip to content

Kernel module for overclocking the Nintendo Wii U/Mayflash GameCube adapter.

License

Notifications You must be signed in to change notification settings

hannesmann/gcadapter-oc-kmod

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

34 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

gcadapter_oc_kmod

Kernel module for overclocking the Nintendo Wii U/Mayflash GameCube adapter.

The default overclock is from 125 Hz to 1000 Hz. Official adapters should be able to handle this but if you experience stutter or dropped inputs you can try lowering the rate to 500 Hz.

This document by SSBM_Arte has more detailed information regarding controller overclocking.

Installing

  • Arch Linux, Manjaro, etc: Arch-based distros use DKMS to rebuild the module on every kernel update. A PKGBUILD is available in packaging/arch and in the AUR. A prebuilt package can be found in the "Releases" tab.
  • Fedora, Nobara, etc: RPM-based distros use AKMOD to rebuild the module on every kernel update. A SPEC file is available in packaging/rpms. A prebuilt package can be found in the "Releases" tab.
  • SteamOS 3 (Steam Deck): Instructions for a manual install are available in STEAMOS.md.

For other distros, follow the build guide and copy the module to an appropriate directory under /usr/lib/modules (example: /usr/lib/modules/$(uname -r)/extra). After copying the module, run depmod and create a file called /usr/lib/modules-load.d/gcadapter-oc.conf with the contents gcadapter_oc. This should be enough to load the module automatically. The module will need to be rebuilt every time you update the kernel.

Building

Use make to build gcadapter_oc.ko and sudo insmod gcadapter_oc.ko to load the module into the running kernel.

asciicast

If you want to unload the module (revert the increased polling rate) use sudo rmmod gcadapter_oc.ko. You can also use make clean to clean up any files created by make.

If you get an error saying "building multiple external modules is not supported" it's because you have a space somewhere in the path to the gcadapter-oc-kmod directory.

GNU Make can't handle spaces in filenames so move the directory to a path without spaces (example: /home/falco/My Games/gcadapter-oc-kmod -> /home/falco/gcadapter-oc-kmod).

Changing the polling rate

Polling rate is set according to the bInterval value in the USB endpoint descriptor. The value sets the polling rate in milliseconds, for example: an interval value of 4 equals 250 Hz.

You can change the rate by using the kernel parameter gcadapter_oc.rate=n (if installed), passing the rate to insmod gcadapter_oc.ko rate=n or going into /sys/module/gcadapter_oc/parameters and using echo n > rate to change the value (video).

About

Kernel module for overclocking the Nintendo Wii U/Mayflash GameCube adapter.

Resources

License

Stars

Watchers

Forks

Packages

No packages published