DeclanT

hackpads/DeclanT/README.md

@@ -0,0 +1,17 @@
+# DeclanT
+This is my first attempt at making anything like this. I knew coding but CAD and Kicad where completely new to me, im glad to be part of this
+
+
+
+# BOM:
+- 1x PCB
+- 1x Seeed XIAO RP2040 (through-hole)
+- 2x EC11 Encoder
+- 10x MX-Style switches - Gateron Milky Yellows
+- 10x 1N4148 Diodes (through-hole)
+- 10x Blank DSA keycaps
+- 2x Encoder Knobs
+- 4x M3 Heat-Set Inserts
+- 4x M3x20mm Bolts
+- 1x Case, Base & Top (preferably yellow, otherwise cyan)
+- 1x Case Plate (Laser Cut Acrylic)

hackpads/DeclanT/desktop.ini

@@ -0,0 +1,2 @@
+[.ShellClassInfo]
+LocalizedResourceName=Declan T

hackpads/DeclanT/firmware/config.h

@@ -0,0 +1,5 @@
+
+#define ENCODER_A_PINS { GP4, GP2 }
+#define ENCODER_B_PINS { GP3, GP1 }
+
+#define ENCODER_RESOLUTION 4

hackpads/DeclanT/firmware/keyboard.json

@@ -0,0 +1,44 @@
+{
+    "manufacturer": "DeclanT",
+    "keyboard_name": "myheadhurts",
+    "maintainer": "Nuclear-Wingman",
+    "bootloader": "rp2040",
+    "diode_direction": "COL2ROW",
+    "features": {
+        "bootmagic": true,
+        "command": false,
+        "console": false,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": true
+    },
+    "matrix_pins": {
+        "cols":["GP26", "GP27","GP28","GP29"], 
+        "rows":["GP6","GP7","GP0"]
+    },
+    "processor": "RP2040",
+    "url": "",
+    "usb": {
+        "device_version": "1.0.0",
+        "pid": "0x0000",
+        "vid": "0xFEED"
+    },
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"matrix": [0, 0], "x": 0, "y": 0},
+                {"matrix": [0, 1], "x": 1, "y": 0},
+                {"matrix": [0, 2], "x": 2, "y": 0},
+                {"matrix": [0, 3], "x": 3, "y": 0},
+                {"matrix": [1, 0], "x": 0, "y": 1},
+                {"matrix": [1, 1], "x": 1, "y": 1},
+                {"matrix": [1, 2], "x": 2, "y": 1},
+                {"matrix": [1, 3], "x": 3, "y": 1},
+                {"matrix": [2, 0], "x": 0, "y": 2},
+                {"matrix": [2, 1], "x": 1, "y": 2},
+                {"matrix": [2, 2], "x": 2, "y": 2},
+                {"matrix": [2, 3], "x": 3, "y": 2}
+            ]
+        }
+    }
+}

hackpads/DeclanT/firmware/keymaps/default/keymap.c

@@ -0,0 +1,20 @@
+// Copyright 2023 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+    _1
+};
+
+uint8_t current_layer = _1;
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [_1] = LAYOUT(
+        KC_7,   KC_8,   KC_9,   KC_DOT,
+        KC_4,   KC_5,   KC_6,   KC_0,
+        KC_1,   KC_2,   KC_3,   KC_ENT
+
+    )
+};

hackpads/DeclanT/firmware/readme.md

@@ -0,0 +1,27 @@
+# myheadhurts
+
+![myheadhurts](imgur.com image replace me!)
+
+*A short description of the keyboard/project*
+
+* Keyboard Maintainer: [DeclanT](https://github.com/Nuclear-Wingman)
+* Hardware Supported: *The PCBs, controllers supported*
+* Hardware Availability: *Links to where you can find this hardware*
+
+Make example for this keyboard (after setting up your build environment):
+
+    make myheadhurts:default
+
+Flashing example for this keyboard:
+
+    make myheadhurts:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

hackpads/DeclanT/firmware/rules.mk

@@ -0,0 +1,4 @@
+ENCODER_ENABLE = yes
+
+# required for rp2040
+LTO_ENABLE = yes