Create README.md

[sock745]

Submission Checklist:

• I am a current high school, middle school, or home schooled student.

  • I am 18 or under
  • I have filled out the verification form (do this for every pull request)
    • or the legacy verification form if the above doesn't work

• I have joined the #electronics channel on Slack

• I made this board from scratch, even if I followed a tutorial

• I have followed the directions in README.md

  • Created a folder under onboard/projects
  • Filled out TEMPLATE.md as README.md inside your project folder
  • Uploaded gerber.zip and schematic.pdf inside your project folder
  • Created a folder called src and uploaded design files
  • Uploaded screenshot of PCB order called cart.png with all costs included
  • I am ordering the smallest batch size (ie. JLCPCB's smallest order is for 5 boards)
  • If outside the US I've checked that I can afford the customs charges in my country (which isn't covered by the grant)

• (Optional) This project is from a tutorial¹.

• (Optional) This project is for OnBoard Live².

• (Optional) This project is for Trick or Trace³.

• (Optional) I'm in a FIRST (FRC, FTC, FLL, etc.) team. The number is: ____

Footnotes

1. Projects from a tutorial are 100% fine! We just want to ask so we can count how people are using tutorials. ↩

2. OnBoard Live is a special version of OnBoard where you can earn more money for designing advanced boards. Check out the #onboard-live channel on our Slack! ↩

3. Trick or Trace is a limited time design contest for PCBs, enter your PCB into one of the three catagories and by peer voting, get chosen for a 100$ additional grant from OnBoard. ↩

[prophetorpheus]

Hi, I'm Orpheus Leap! Here to help you review your PR.

projects/AlexW65%Keeb:

Required files

✅	README.md	A description of your project
✅	cart.png
✅	gerber.zip
❌	schematic.pdf	You must export your schematic file as schematic.pdf
❌	Source files - Unknown	No source files found. Please make a directory called 'src' and put your gerbers and upload your source files there. There must be two files, one for the schematic and one for the PCB. .

You can view a render of your board over on gerber.zip/2d!

Happy OnBoarding!
_{This bot is a simpler helper for common submission types. If there's an error with this, please point it out and someone from the OnBoard team will look at it manually.}

[LimesKey]

Hi @sock745!

You have not selected assembly from JLCPCB, so there won't be any components (NFC chip, LEDs, etc) installed on your board. Please check out https://github.com/hackclub/OnBoard/blob/main/docs/ordering_from_JLCPCB.md for how to do this. You can order up to 5 assembled boards.

Additionally, please make a "src" folder in projects/[name]/, and put your project sources there. They should be two .JSON files, one from the schematic tab, one from the PCB tab.

Also, if you haven't done it already, you need to export your schematic tab as a PDF (in the schematic tab go to File > Export > PDF), and upload that.

[LimesKey]

Can you please fix your files and add in the /src folder?

[sock745]

I fixed the file names but I’m confused on how I should do the .json files for the src folder.

…

On Wed, Nov 6, 2024 at 12:20 PM Ryan ***@***.***> wrote: Can you please fix your files and add in the /src folder? — Reply to this email directly, view it on GitHub <#1303 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A34QI7B43XRPAQTY26NDYVLZ7J2XDAVCNFSM6AAAAABRBHOW4OVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINRQGY4TSNBXGI> . You are receiving this because you were mentioned.Message ID: ***@***.***>

[LimesKey]